How to distinguish the good and bad of the tiles?
Water absorption reflects the density of floor tiles, and indirectly reflects the hardness of tiles, but there is a point need to pay attention, the marble tiles are not be the lowest water absorption the better quality is. When purchasing tiles, we need to pay attention to the smoothness of the tiles design. Poor quality flooring tiles the smoothness will be uneven.
The surface of the bathroom tiles determines whether the effect is smooth, and the straight test of the edge corner of the wall tiles are to see if the kitchen floor tiles are tidy and the size of the gap is consistent. To test the stain resistance on tiles price, we must know that wood tiles will accompany us for a long time.
The tile now have a series of innovations in wear resistance, such as polished tiles, microcrystals tiles, full body glazed tiles, and rustic tiles, which have a qualitative leap. To judge whether the surface is wearable, we only need to pick up the knife or key in the hand and scrape to the surface of the tiles to check if it will scrape the glaze off the surface of the tiles. If such a small description can not be accepted, it can be concluded that this tiles are not a good companion who can accompany us for a long time.
The qualified tiles are usually packed in cartons, and the name of the production plant, the product name, the trademark, the size, the grade, the weight, the color number and the quantity should be printed on the packing box. The national standard stipulates that the surface quality of the superior tiles should be observed at least 95% surfaces at least 0.8 meters without obvious defects. Of course, most of the tiles will be able to reach the standard if they are based on this standard. But we mainly do not look at 95%, but have no obvious defects, from the packing box random checks of several tiles, see the surface of the product has the following defects: ripples, spots, glaze, knock, crack, lack of glaze and so on.
The dust, the debris thoroughly clean, no empty drum, crack and sand and other defects, the smoothness will fundamentally determine the quality of the tiles, good tile workers this step is in place. Before laying the tiles, we need to find the vertical line in advance so that the tiles are uniform and vertical. In addition, the elevation control line should be popped around the wall before the construction, and the cross line is popped out on the ground so as to control the size of the floor tiles.
On the basis of the design requirements of the drawings, the color, texture and surface leveling of the floor tiles are selected strictly, and then the pre paving is required according to the requirements of the drawings. The possible size, color and texture errors in the pre paving are adjusted and exchanged until the best effect is achieved, and a smooth stack is stacked smoothly according to the paving.
The surface of floor tiles should be wetted before paving. The floor tiles are placed on the cement mortar according to the requirements, and the cement floor tiles are tapped with a rubber hammer until the dense and smooth surface reaches the requirements. It is very uniform when the mortar is smeared. It is to prevent the possible cause of the tile empty, and there is a hole and other tools to smooth the post paving of the cement layer.
