Posts

How Tracing Tile Cut Lines before Toilet Installation?

Tile the areas away from the toilet flange first. When tiling a bathroom, mark out your desired grid pattern on the floor, and lay tile over the unobstructed areas first. Don’t tile around the toilet flange—the circular piece that connects to the drain pipe and upon which the toilet itself will rest—until the end.


Draw out a grid pattern for the tile layout on paper, and then on the subfloor itself, that reduces the number of tile cuts you need to make. If you’re using larger tiles—e.g., 12 by 12 in (30 by 30 cm) or larger—you may be able to cut a circle out of a single tile to go around the flange.

Cut one or more sheets of paper that match the size of your tiles. If you need to cut 1 tile to go around the flange, cut 1 sheet of paper; if you need 4 tiles, cut 4 sheets of paper. Be as precise as possible in sizing the sheets of paper properly. For instance, if your tiles are 8 by 8 in (20 by 20 cm), cut your sheets of paper to those dimensions.


Lay the sheet(s) of paper in place, overlapping the flange. Place the sheet(s) of paper exactly where the tile(s) will go, making sure to account for the spacing of your grout lines. That is, if your other tiles are spaced 0.125 in (0.32 cm) apart due to the grout lines, leave this same gap between the set tiles and your paper.


You can employ the same plastic spacers you use when laying the tile to make sure your grout line spacing is consistent with your paper templates. If you only need to cut a single tile, just lay a single sheet of paper right over the flange.

What should you do before install ceramic wall tiles?

Ceramic tile is a versatile and durable finishing material. Tiles can be installed as a floor or wall covering nearly anywhere, but they are especially useful in bathrooms and kitchens. Tiles design wall can resist moisture and handle scrubbing much more readily than drywall or other materials, and so they are the ideal choice for humid bathrooms and kitchens where they will be exposed to cooking splatters. Learning how to install ceramic wall tile is a task well within the reach of an average homeowner. The process requires only a few tools and materials.

Make sure your wall is ready to go. Once you’ve removed the current wall dressings and wall items, like light switch covers, you’ll want to check the base layer that you will be building on to make sure that it is structurally sound. This is important, since a rotting or weak wall tiles can cause your tiling job to warp, crack, or even break and fall down. Look for signs of mold or damage to the tiling surface.

Cracks are often a sign that a wall may be weak and need to be replaced. Try pressing on the wall, especially at the studs. If it gives way or feels soft, it may require work. If you are going to be tiling a large area, remember to use tiling board as a backer and not just put the wood tiles directly onto drywall. Tiling board is installed just like drywall (nailed to the studs) but is made of more water resistant materials which will keep it from warping and cracking your tile work.

Use a level and tape to measure for your tile locations. Now, using a level and measuring tape, measure and mark for the middle lines in the area you will be tiling. You want to find both the vertical and horizontal middle, since you will use these to keep your Ceramic straight and divide the area into sections for tiling. Never assume a fixture in the room like the tub or vanity (or even the ceiling) is perfectly level. They rarely are. It is very important to rely on the level.

Mark the locations on the wall using a chalk line. Using a chalk snap line, mark the mid-line and vertical lines which you just measured. If you’ve never used a chalk snap line before, don’t worry: it’s easy. Simply place a nail at one end of the space you marked, attach the string, pull it taut and snap it down. This will leave a straight line on your wall. You’ll still want to check it for level but it’s much more accurate than drawing a line. You can use just regular string and manually chalk it to make a chalk line but using a chalk box, which are easily bought for about $5, will generally be a lot less work.

Dry fit and then cut cement tiles to size using a diamond wet saw. Dry fit your rustic tiles to be sure that they will look the way you want them to look. Once you’re comfortable with how it looks, figure out how the tiles price will meet up with the corners and edges of your wall. You will probably need only a part of a tile when it comes to some of these areas, so it will be necessary to cut the tiles to size. Measure how much space you need for each row with the spaces and cut tiles to size using a diamond tipped wet saw.

So, for example, let’s say your wall to tile is five feet long. You’re putting up subway tile and the tiles are 6″, with spaces of 1/4″ between each of them. You’ll need 9.6 tiles for each row to cover that space, meaning nine full tiles and one cut to 3.6″. If you don’t own a diamond tipped wet saw, you can usually rent one from your local major hardware store. You can also use a tile cutter, but this is more likely to end in broken tiles so only take this option if using cheaper tiles.

Dry fitting is especially important if your tiles make up a pattern, since you will need to be very comfortable creating that pattern. You don’t want to make a mistake or have to spend a lot of time thinking about it once the mortar is up on your wall. You can test your dry fit pattern by making a layout stick, which can be made from any straight and level piece of spare wood. Lay the tiles on a floor and mark the layout stick with a pencil at the joints between tiles. Use the layout stick to see how the tiles fit on the wall.

What’s the ceramic tiles?

Ceramic tiles are a mixture of clays and other natural materials, such as sand, quartz and water. They are primarily used in houses, restaurants, offices, shops, and so on, as bathroom wall and kitchen floor surfaces. They are easy to fit, easy to clean, easy to maintain and are available at reasonable prices. Ceramic tiles design show good strength and can withstand high temperatures and acidic materials, but are brittle, and weak in tension and shearing. Applications include floor tiles, pipes, bricks, cookware, tableware, sanitary ware, pottery products, gas and fire radiants, kiln linings, glass and steel crucibles, knife blades, disc brakes in vehicles, watch cases, and biomedical implants.

The global demand for ceramic tiles was valued at around USD 72.0 billion in 2018 and is expected to reach around 120.0 billion in 2020, growing at a CAGR of slightly above 9.0%. In terms of volume, the global ceramic tiles market stood at 13.0 billion square meters in 2018.

The demand for ceramic tiles is primarily driven by the growing construction and infrastructure industry. Strong growth of construction industry in emerging economies such as India, China, Brazil and South Asian countries is expected to fuel the growth of ceramic tiles market in the future. Increasing industrialisation and urbanisation has resulted in growing demand for commercial as well as residential buildings in the emerging economies. Technological advancement in the manufacturing of ceramic tiles and availability of abundant raw materials is also contributed in growth of ceramic tiles market.

Floor tiles, wall tiles and others are the key product segment of cement tiles market. Floors tile was the largest product segment accounting for more than 50.0% share of the total volume consumption in 2018. Floor tiles are also expected to be the fastest growing product segment in terms of volume throughout the forecast period. Marble Wall tiles was the second leading segment. Other products segment, including tabletops, facades, countertops, etc. are also expected to exhibit significant growth in the years to come.

Ceramic tiles are widely used in host of application in different industries such as, residential replacement, commercial, new residential, others (facades, countertops etc.). Residential replacement was the largest application in 2018, accounting for more than 45% of the total volume consumed. Demand for wood tiles used for residential replacement has increased due to its potential as a substitute for paints and other products. New residential is also expected to grow rapidly.

Asia Pacific was the largest market in 2018 with more than a 50% share in total volume consumption. Europe was the second largest market followed by Latin America, Middle East Asia & Africa and North America respectively. China, India and Brazil are alos major driving factors for the growth of global ceramic market. Some of the key industry participants in global ceramic tiles price market include Porcelanosa Groupo, Saloni Ceramica, Mohawk Industries, BARANA Tiles price, RAK Ceramics, Kajaria Ceramics, Crossville Inc., Ceramiche Ricchetti, Atlas Concorde, and Florida Tile.

What are the matters needing attention in the balcony tiles paving?

Balcony as a place of leisure and contact with the outside world, decoration or not will directly affect the degree of beauty and comfort of the room, so when decorating the balcony wood tiles, not only to consider the beautiful design should also pay attention to practical and comfortable.

The selection of balcony cement tiles must be moderate. The decoration of the balcony is different from the decoration of other space in the room, because the space of the balcony itself is relatively small, and the style of the balcony seems to be more compact, so if you also like decoration bedroom living room to choose some large specifications of small tiles, it may not have a very good decoration effect.

Balcony tiles design selection should pay attention to, it is best to choose some small and medium-sized tiles price, so that the overall style of decoration will be more beautiful, and will look more compact, will not have a narrow feeling, this must be noted.

The color of balcony marble tiles should be carefully when you chosen them. Balcony floor tiles color selection will directly affect the style of balcony decoration molding, so the choice of polished tiles color are also very important, so must not be careless in color selection. Balcony tiles color selection must be in line with the choice of the external wall style, and the choice of balcony tiles are not suitable for some too gorgeous color. Some light and elegant colors look better overall, this point in the selection of balcony tiles must pay attention.

Balcony tiles decoration layout should be compact. Balcony tiles installation is also a very detailed requirement, must be installed very compact, can not be arbitrary. Before decoration, the whole balcony should be carefully measured where tiles are needed, and the number of tiles to be installed should be accurately measured, and careful layout and design should be carried out beforehand, then attention should be paid to the installation according to the predetermined design situation, so that the finished product will be better.

The choice of balcony tiles is the most basic work of balcony decoration, and the installation of balcony tiles is the most critical part of the whole balcony decoration, the two complement each other. In the decoration of the balcony, from the above aspects to do a good choice of balcony tiles and collocation, the decoration of the balcony whether the overall image or style is sure to withstand inspection and appreciation.

How to distinguish the good and bad of the tiles?

Water absorption reflects the density of floor tiles, and indirectly reflects the hardness of tiles, but there is a point need to pay attention, the marble tiles are not be the lowest water absorption the better quality is. When purchasing tiles, we need to pay attention to the smoothness of the tiles design. Poor quality flooring tiles the smoothness will be uneven.

The surface of the bathroom tiles determines whether the effect is smooth, and the straight test of the edge corner of the wall tiles are to see if the kitchen floor tiles are tidy and the size of the gap is consistent. To test the stain resistance on tiles price, we must know that wood tiles will accompany us for a long time.

The tile now have a series of innovations in wear resistance, such as polished tiles, microcrystals tiles, full body glazed tiles, and rustic tiles, which have a qualitative leap. To judge whether the surface is wearable, we only need to pick up the knife or key in the hand and scrape to the surface of the tiles to check if it will scrape the glaze off the surface of the tiles. If such a small description can not be accepted, it can be concluded that this tiles are not a good companion who can accompany us for a long time.

The qualified tiles are usually packed in cartons, and the name of the production plant, the product name, the trademark, the size, the grade, the weight, the color number and the quantity should be printed on the packing box. The national standard stipulates that the surface quality of the superior tiles should be observed at least 95% surfaces at least 0.8 meters without obvious defects. Of course, most of the tiles will be able to reach the standard if they are based on this standard. But we mainly do not look at 95%, but have no obvious defects, from the packing box random checks of several tiles, see the surface of the product has the following defects: ripples, spots, glaze, knock, crack, lack of glaze and so on.

The dust, the debris thoroughly clean, no empty drum, crack and sand and other defects, the smoothness will fundamentally determine the quality of the tiles, good tile workers this step is in place. Before laying the tiles, we need to find the vertical line in advance so that the tiles are uniform and vertical. In addition, the elevation control line should be popped around the wall before the construction, and the cross line is popped out on the ground so as to control the size of the floor tiles.

On the basis of the design requirements of the drawings, the color, texture and surface leveling of the floor tiles are selected strictly, and then the pre paving is required according to the requirements of the drawings. The possible size, color and texture errors in the pre paving are adjusted and exchanged until the best effect is achieved, and a smooth stack is stacked smoothly according to the paving.

The surface of floor tiles should be wetted before paving. The floor tiles are placed on the cement mortar according to the requirements, and the cement floor tiles are tapped with a rubber hammer until the dense and smooth surface reaches the requirements. It is very uniform when the mortar is smeared. It is to prevent the possible cause of the tile empty, and there is a hole and other tools to smooth the post paving of the cement layer.

Why can’t bought the cheap tiles?

Home decoration is a very tedious thing, and the effect of home decoration is more related to the use of housing in daily life. In order to decorate the effect of home decoration, the selection of floor tiles is very important, because tiles are the largest building material used in the whole family assembly link, besides the ornament and decoration of the house, the more important function is to protect the whole surface of the house.

Since the application of the decoration floor tiles design is so important, we should pay great attention to the selection and purchase of marble floor tiles . Especially, we should pay attention to it: too cheap tiles should not be bought, because it is too cheap, there must be problems. Why is it too cheap to have tiles design? So what are the main problems with too cheap floor tiles? Cheap tiles, very poor level. Too cheap tiles, must be the existence of smoothness, the use of these tiled tiles price to decorate the house, housing is difficult to produce the overall effect, with such wood tiles on the ground or wall, often appear uneven phenomenon.

Cheap tiles, easy to infiltrate. Too cheap floor tiles design, the existence of floor tiles surface easy to seep. Because the bulk density and sintering temperature of the floor tiles are not enough, the density of the body and the sintering problem will lead to the low overall vitrification of the floor tiles. Finally, the wood marble tiles appear surface infiltration after being put and applied in the future.

Cheap tiles, there is a serious color difference. Too cheap bathroom tiles, products before the factory, most of the products are not too strict product color classification, or is the product size and color number of various requirements are not strict, so it is easy to appear serious color difference, the use of such cement tiles to the house paving, the overall effect is a disaster.

Cheap tiles, poor wear resistance. Too cheap rustic tiles, the design of the product itself is defective, the budget cost of the product is already discounted, so the surface of too cheap tiles are naturally also not good wear resistance, not to reach the standard. Cheap kitchen tiles, not skidding. Too cheap wall tiles, most of the rough, like such products have no specific product standards, not to mention the antiskid coefficient of consideration, the use of such products for paving, in the elderly or children’s families, that has a huge security risk

Cheap tiles, no guarantee, no service. Too cheap tiles, not only does not guarantee, but also has no service, because similar to these too cheap porcelain tiles products are mostly from irregular manufacturers, similar to irregular and unstructured manufacturers, they are often lack of support and service support this link.

BARANA new full body marble tiles–One tile, one world, one heart and one stone tile design

Long live in reinforced concrete forests, it is hard to miss the natural beauty of past years. However, people who are accustomed to the conveniences of modern society, if they really want to return to the countryside, are expected to have another consideration. Compared with the pursuit of the so-called “return”, the use of more natural stone tiles to decorate their own side of the world can better meet the fantasy of the natural life of the majority of people.

In this era of natural beauty, natural stone is loved by many people.BARANA full body marble tiles are more close to the texture of natural stone both in texture and color. The whole tile can achieve the perfect texture effect from any angle, so as to achieve real texture. The full body marble tile series has higher fidelity than traditional marble tiles, and is more similar to stone. It is noble in quality, delicate in stone, glossy and soft, and has strong decoration. It is the best in marble tiles.

The warm and soft rice yellow gives people a sense of peace and peace, with a strong American pastoral atmosphere, so that people can not help but sink into this boundless and leisurely. The combination of the aloofness concealed in the world and the prosperity of modern cities gives a rare feeling to the people who live in reinforced concrete forests for a long time.

Combined with the mystery of Turkey and the natural texture of stone, a noble and elegant marble tile with unique charm is designed. Its texture is soft, meticulous, or deep or shallow, creating a mysterious and fascinating artistic conception. The texture of the tile is just like gold wire inlaid in it, shining brightly. The combination of gold and jade enjoy the honor. The color is pure and natural, and the color block is well distributed. Using 3D reduction technology, showing the feeling of interlacing trees. Restore the delicate texture of the original wood, make it natural and comfortable and return to nature. Restore the delicate texture of the original wood tiles, make it natural and comfortable and return to nature.

The appearance of white and transparent is mixed with a little wrinkle like texture, giving people the feeling of floating clouds. The tiles surface is as smooth as a mirror, showing a glossiness of jade, emitting a crystal like feel. The layout of the space is scattered, emphasizing the integration of classical and modern beauty. It is intended to create a comfortable, comfortable and stylish lifestyle. In the tone of the use of cool blue ash, to add a low profile for the fashionable life.

The layout of the space is scattered, emphasizing the integration of classical and modern beauty. It is intended to create a comfortable, comfortable and stylish lifestyle. The use of cool colors in tone tones adds a low profile to the fashionable life. The delicate texture of the surface, elegant and vivid lines, each of which is the display of nature’s ghosts and workmanship. The rich texture is displayed on the floor tiles. It seems to deduce a decorative feast, and take you deeply to the natural charm. With a clear heart, you can show a transparent space from inside to outside. This is the charm of the full body marble tiles.