Why not use the stone for the decoration, to use the ceramic tile?

Family decoration is a very important and grand thing, and the good or bad decoration not only affects the overall visual effect, but also related to the daily life of the use, In the entire decoration process, the choice of decoration materials is often very important. Is family decoration stone or tile?

The stone is cracked and fragile, and the processing requirement is very high. If it is not careful, it will cause fragmentation. Ceramic tiles are made by physical suppression and chemical firing. They are hard in texture and can be machined according to the actual decoration requirements of consumers.

Stone Mori hardness is only 2-3 grade, long time for the ground, the surface is easy to wear and wear. The ceramic tile is 4-7 degree Mori hardness, the surface adds the glaze protection, the product is super wear-resisting.

Stone is easy to break and fragile, especially large long boards. Even if the glued steel mesh is fixed, slotting and steel bars are easy to break when transporting and installing paving. Ceramic floor tiles are made by physical suppression and chemical firing. The texture is hard and dense. Generally, cars will not break through brick surfaces slowly.

The stone is mainly made of calcium carbonate naturally, with more cracks on the surface and easy to permeate. All kinds of stolen goods at home are easily infiltrated into the marble. The clean surface can not be cleaned at all, and the professional nursing price is expensive. The glaze layer on the surface of the ceramic tile is fired at high temperature. The stains are completely impervious and polished. The surface is smooth and easy to clean.

The nature of stone material causes small holes and crevices on the surface of stone, easy seepage and high water absorption, which is the reason why stone cleaning and nursing can’t be used for water. The glaze layer of ceramic bath tile is dense and smooth, and the water absorption rate is less than 0.3%. Therefore, tiles can be washed and cleaned with water.

The natural stone of the stone surface texture color difference is large, many defects, even if there is a uniform and unflawed stone, the price is also very expensive, the common stone will be filled with glue, dyeing treatment; Ceramic tile specialized production, raw materials, technology is completely controllable, no defects and chromatic aberration.

Stone is rough mining and simple processing, semi-finished products are not. At the same time, due to the non renewable quality of the products and mine resources, supply is not stable, replenishment is basically impossible, home installation especially large project in supply and time is difficult to control; The ceramic tile flooring is the finished product of the standardized industrial production, the size specification can be made according to the requirement, the product is bought in and out, the supply is stable, the quantity is big also can be delivered on time, the time limit is guaranteed.