What should we do when we cut tiles backsplash?

Installing a marble tile backsplash yourself is a great way to save money while getting the exact look you want. There is more to installing backsplashes than just arranging floor tiles, however; you have to measure and cut the tiles design so that they fit properly. If the backsplash tile is already installed, you may still be able to cut holes into it for new fixtures, as long as you use the proper tools.

Turn off the power to your kitchen. Find the electrical panel in your home. It is typically a small, metal panel painted to match your wall. Open the panel, then find the switch for the bathroom tiles or kitchen electrical outlets (wherever you are doing the backsplash kitchen tiles). Flick the switch to the off position. Remember to flick the switches back on after you have finished installing the cement tiles. If your wood tiles are already on the wall and you wish to cut a hole in them, complete this step, then click here to learn how.

Remove any light switch and outlet covers. Use a screwdriver to remove the screws from each cover. Place the covers into separate zippered bags along with their matching screws. Work 1 cover at a time so that you don’t mix or lose the pieces. You will need to reinstall the light switch and outlet covers after you have finished installing the wall tiles.

Clear and cover the counters. Move anything on the counter that might get in the way, such as coffee makers and toasters. Cover the counter with a plastic sheet to protect it. If you are installing the tiles later, it would be a good idea to mask off counters and cabinets. This will save you a step. To mask off the counters and cabinets: lay strips of painter’s tape along any counter or cabinet edges that touch the backsplash wall.

Mark the center of the wall, then draw a plumb line through it. Find the center of the backsplash wall, and make a like mark with a pencil. Place a 2-ft (61-cm) level against the mark and orient it vertically. Use the edge of the level as a ruler to draw a vertical line spanning the height of your backsplash tiles. The plumb line will help you lay out your tiles evenly once you go to mount them on the wall. Make sure that the level is straight. The bubble inside the glass tube should be centered between the lines.