Posts

How to Install Tiles?

/in /by

Spread your mortar. Spread mortar in a small area where you will begin to work. Only work with a roughly 2’x3′ area at a time. You do not want the mortar to have time to set before you can lay your floor tiles. Using a notched trowel (different sizes may be needed, 3/8″ is a good starting point), spread the mortar between sections that you marked with the chalk line. If the mortar rises up between the tiles design (to be flush or nearly flush with the cement tiles surface), that means it’s too thick or that the ridges need to be shorter.

The mortar should be covering the entire tiles, if you lift it up after placing it. If when you lift up the wood tiles you see only lines of mortar on the tiles, then the mortar has dried out too much or the bed is too thin and the height of the ridges must be increased. If using tile sheets, use a trowel with smaller notches. This will keep the mortar from coming up through the gaps between the tiles.

Lay your tiles. Lay your tiles onto the mortar, starting at the right corner you marked and following a straight line. Leave gaps of 1/8″ where the edge of the marble tiles meets up with the wall or floor. This is to allow room for expansion and movement, as the material naturally changes with its environment. This gap can be covered with grout, molding, or shoe tiles.

Insert the spacers as you go. Place tile spaces between each tiles price as you go, or simply use your eyes to estimate if using bathroom tiles sheets. These spacers are usually places at the corners of each tiles and look like the cross shape that is formed by four wood marble tiles being next to each other. Level the tiles as you go. Use a carpenter’s level as you go to make sure that the tiles are level.

Cut tiles for the edges. Use a masonry wet saw to cut any tiles you need for the corners and edges, carefully measuring them to fit for your particular tiles project. Don’t forget to leave the 1/8″ gap all around the edge. Remove your spacers before doing the grout. Remove the spaces once the mortar has set and you’re ready to grout.

What is the porcelain tile?

/in /by

Porcelain tiles are ceramic tiles commonly used to cover floors and walls, with a water absorption rate of less than 0.5 percent. The clay used to build marble porcelain tiles is generally denser. They can either be glazed or unglazed. Porcelain tiles price are one type of vitrified tiles, and are sometimes referred to as porcelain vitrified tiles.

Although porcelain has been used for making marble tiles for many years, modern production methods and quantities has made porcelain tiles design available for the average householder in recent years. It has quickly replaced ceramic tiles as the most popular option. Large-scale production of porcelain tile is undertaken in many countries, with the major producers being China, Italy, India, Spain and Turkey. There are also countries undertaking small-scale production, such as Australia and strong growth in Brazil.

The wear rating of the tile can be graded from zero to five according to ISO 10545-7 (also, ASTM C1027) test for surface abrasion resistance of glazed tile, and this can be used to determine suitability for various end use conditions. Polished Porcelain tiles: the dense, hard surface of porcelain has made polishing tiles a viable alternative to a glazed surface. This means that a tile can be fired, then a polish cut into the surface, creating a shine without a glaze. Porcelain tile is much harder than ordinary ceramic tiles and is usually selected, despite its higher price, for its hard wearing nature. Porcelain tile can be used in both wet and dry areas such as bathrooms, showers and kitchens.

Disadvantages of porcelain tiles: Porcelain tile is denser and therefore heavier to handle than other ceramic tiles. For this reason, it is generally more expensive. Being harder, it is more difficult to cut and drill and requires specialist tools, which can hamper fitting and increase costs. Polished porcelain tile may need sealing, where ordinary glazed tiles do not. The glazed surface is coated with less than two microns. There are several ways to cut a porcelain tile. Power tools like an angle grinder, tile cutter, tile nipper, drill bit can be used to do this. However, the most effective way is to use a wet tile saw because of it’s versatility and cutting capacity.

Specialized cements are necessary for installation of porcelain tiles, and in the US specifications, are set by the Tile Council of America and supported by the Tile Contractors Association. Porcelain tiles, being denser and heavier than ordinary ceramic tiles, needs a stronger adhesive to hold the weight on walls. Therefore, typical ready-mix adhesives are not recommended for porcelain tiles. When porcelain tile is first made, it is not absorbent, but the polishing process for making the unglazed surface shiny cuts into the surface, leaving it more porous and prone to absorbing stains, in the same way as natural stone tiles. Unless they have a suitable, long-lasting treatment applied by the manufacturer (for example, nanotech treatment), polished porcelain tiles may need sealing. Porcelain tiles sealants are either solvent-based or water-based, which is cheaper, but does not last.

How to calculate the price of floor tiles?

/in /by

Tiles are indispensable decoration material in modern home decoration, and the floor area is large. It is precisely because of a large number of demand has been stimulating the tiles design industry to promote the old and bring forth the new, the marble tiles on the market is very diverse, the price is also very different.

There are two ways to sell floor tiles: sold by block or sold by square meters. Before purchasing tiles, you should calculate the area of wood marble tiles which needs to be laid before decoration. Some building materials stores have conversion charts. As long as you know the area to be laid, you can find out the number of tiles needed. Some conversion charts are simpler, as long as you know the length and width of the area pasted can find the number of tiles needed. Some floor tiles boxes will also list the size of a box of tiles.

Usually, 640 tiles are needed to cover an area of 80 square meters and 320 tiles are needed to cover an area of 14 cm by 14 cm and 20 cm by 20 cm by 20 cm. Another thing to note is that ceramic tiles tiling will have a certain amount of wear and tear, so prepare the amount of this part. This formula can also be used to roughly calculate the amount of tiles required: (decorative area per tile area) X (1 + 3%) is the number of flooring tiles required for construction, of which 3% is the construction loss.

In addition to the main material of tiles, ordinary cement, white cement, medium sand, 107 glue and so on are needed for ceramic laying and pasting. Usually a 12.5 square kilogram of cement and 34 kilograms of medium sand are needed for laying a square floor tiles. After the tiles are finished, it needs to be sealed with white cement, about 0.5 kilograms per square meter.

The common marble tiles are 200 *200mm, 300 *300mm, 400 *400mm, 450 *450mm, 500 *500mm, but there are other larger floor tiles. In terms of production technology, floor tiles are mainly divided into two types: block tiles and glazed tiles. Among them, body wood tiles are divided into anti-skid tiles and polished tiles, but polished tiles design of the same color are about 1.2 times more expensive than non-skid tiles.

It has become an unwritten rule that the wall and floor of bathroom decoration should be all tiled. In fact, bathroom tiles can have other functions in bathroom. Because the environment in the bathroom is humid, so if you want a locker, you might as well use cement tiles directly. The bathroom tiles lockers are easy to clean, strong and durable, and are more adjustable with the walls and floors tiles. Of course, it is also a good idea to use tiles to build a bathtub or shower screen.

How to choose bathroom floor tiles?

/in /by

The floor tiles of bathroom is bathed in water almost every day, humidity is very heavy, so when do household decoration, what kind of floor tile design should bathroom use is better? Choose bathroom tiles with low water absorption. High quality tiles deign, low water absorption, so that it can quickly dry. If the marble tiles does not indicate water absorption, you can use water droplets on the back of the tiles price, a few minutes later to observe the diffusion of water droplets, the less water absorption, that is, low water absorption, better quality. The water absorption of wood floor tiles in bathroom is around 1%.

Choose high density tiles. When purchasing bathroom tiles, you can observe from the side whether the tile surface is flat, whether there is uneven thickness of pinholes. Bathroom tiles can be tapped to listen to whether the sound is crisp, the more crisp the sound, indicating that the tiles of high density of texture, better hardness. Such tiles are laid in the bathroom, which are not easy to damage, but also easy to maintain and clean.

Choose dry and wet decoration. That is to say, the separation between shower area and sitting toilet and basin area. Through the different bathroom tiles material and color varieties, to achieve a good division, so that the two do not interfere with each other. Choose light colored tiles. Light colors make the bathroom look more spacious and bright. When choosing, place tiles on the same color and pattern from outside 0.8m. Bathroom tiles choose to pay attention to whether it is marked in line with the state promulgated green health standards and other signs or text, remember not to buy three marble porcelain tiles products.

Choose smaller tiles. The decoration materials for the wall and floor of the toilet are glazed tiles, polishing tiles and mosaic. The specifications for floor tiles are 300*300mm and 330*330mm. Bathroom usually 2 to 4 flat, even if the bathroom area is large, do not use large specifications of floor tiles. Solid floor tiles cutting frequency is too high, waste is greater, inconvenient floor leakage, inconvenient ground leveling, resulting in waste.

Choose glazed tiles with thicker layers. The surface of the tiles can be scratched with hard objects. If there is scratch, it means that the glaze is not enough. When the thin glaze on the tile surface is polished, the wood tiles surface is easy to hide dirt, difficult to clean up, and lack of security. And some unglazed flooring tiles, generally not suitable for laying in a humid and airtight environment, solid cement tiles on the stomatal water vapor and can not diverge, will also lead to the emergence of mold.

What are the matters needing attention in the balcony tiles paving?

/in /by

Balcony as a place of leisure and contact with the outside world, decoration or not will directly affect the degree of beauty and comfort of the room, so when decorating the balcony wood tiles, not only to consider the beautiful design should also pay attention to practical and comfortable.

The selection of balcony cement tiles must be moderate. The decoration of the balcony is different from the decoration of other space in the room, because the space of the balcony itself is relatively small, and the style of the balcony seems to be more compact, so if you also like decoration bedroom living room to choose some large specifications of small tiles, it may not have a very good decoration effect.

Balcony tiles design selection should pay attention to, it is best to choose some small and medium-sized tiles price, so that the overall style of decoration will be more beautiful, and will look more compact, will not have a narrow feeling, this must be noted.

The color of balcony marble tiles should be carefully when you chosen them. Balcony floor tiles color selection will directly affect the style of balcony decoration molding, so the choice of polished tiles color are also very important, so must not be careless in color selection. Balcony tiles color selection must be in line with the choice of the external wall style, and the choice of balcony tiles are not suitable for some too gorgeous color. Some light and elegant colors look better overall, this point in the selection of balcony tiles must pay attention.

Balcony tiles decoration layout should be compact. Balcony tiles installation is also a very detailed requirement, must be installed very compact, can not be arbitrary. Before decoration, the whole balcony should be carefully measured where tiles are needed, and the number of tiles to be installed should be accurately measured, and careful layout and design should be carried out beforehand, then attention should be paid to the installation according to the predetermined design situation, so that the finished product will be better.

The choice of balcony tiles is the most basic work of balcony decoration, and the installation of balcony tiles is the most critical part of the whole balcony decoration, the two complement each other. In the decoration of the balcony, from the above aspects to do a good choice of balcony tiles and collocation, the decoration of the balcony whether the overall image or style is sure to withstand inspection and appreciation.

What’s the advantage of tiles with gaps?

/in /by

When decorating the house, there will be a gap between each tile design, and then fill the gap with the sealant. But some of the sealant materials are of poor quality and become dark and unsightly for some time. Because of these gaps, the pattern tiles price affect the overall beauty.

Why should the cement tiles keep the gap? Size error. Although the marble tiles are now specialized mechanized production, the size has been very accurate, but in the process of wood tiles production, it is inevitable that there will be a certain size error. Because the flooring tiles are fragile, it is unavoidable to knock in the course of transportation. It needs to be cut two times during the decoration. If it is laid without gap, it is easy to appear unevenness and affect the beauty of tiles.

Heat expansion and contraction. People like to decorate in the warm period of the weather. If the cracks are not reserved and the weather turns cold in the winter, the cement mortar of tiles and tiles will have the problem of heat expansion and contraction. In the process of temperature or humidity change, tiles and cement mortar will have a certain degree of expansion and contraction, resulting in the use of tiles in the process of bulging or cracking.

Construction allowance. Tiles placement is easy to see. In fact, tiles placement requires skilled skills. In the whole process of the tiles paving, it is impossible to make a complete paving every piece of tiles without error, and the different light conditions at different time in the daytime and night will also affect the construction effect. There are enough gaps to prevent the size of tiles from being looked at in the same way, but there are problems when splicing.

How many gaps should be left for tiles? The tiles in the kitchen and bathroom usually needs to keep the seam 1mm~1.5mm, and the seamless wall tiles should also keep the gap not less than 1mm, to avoid the uneven problems in the process of daily life. Balcony tiles and external wall tiles and other special places tiles gap is best to widen around 5mm. The gap between the floor tile and the 1.5mm to the 2mm is more suitable.

What kind of sealant is best? The tiles inside the house often filled up for a long time, and the cracks were all black. The beautiful tiles that had been bought were covered by a stiff joint sealant. Then what kind of sealant can make bathroom tiles sealant be more beautiful and icing on the cake? Glass glue: more classification, generally neutral for ceramic, metal, mirror, glass paste filler, a variety of colors can be selected, but this tiles glass adhesive easily moldy, cracking.

Tiles sealant: tiles sealant is often used for floor tiles and bathroom floor tiles. The disadvantage is that the sealant lacks luster, and it will grow dark and dirty easily. Sewing agents: upgraded sealant of common tiles sealant, more decorative and practical, colorful, glossy, more natural and delicate. The tiles sealing looks very small, has a great influence on home life. If tiles filling material is not used or used inferior material, it not only affects beauty, brings trouble for cleaning work, but also affects the service life of tiles.

Let’s talk about the wood floor tiles

/in /by

Ground decoration is a very large project, especially when selecting materials, with large area and heavy material, so it is difficult to choose. Wood flooring, tiles, imitation wood flooring and imitation wood floor tiles, which one is the best? Today, BARANA introduces their respective strengths and weaknesses, so that you are no longer so entangled.

The main raw materials of wood flooring are mainly from natural wood. In the pursuit of healthy and natural fashion, wood tiles is becoming more and more popular. The main reason is that the wooden floor comes from nature, the raw materials are healthy and environmental protection, the decoration effect is fresh and elegant, durable and smooth.

But wooden floor is easier to be corroded and easy to deform after water. It needs to be carefully maintained for a long time. People who don’t like tossing and turning are not suitable for wood marble tiles. In addition, because wood regeneration is slower, raw material prices are more expensive.

The raw material of tiles design are mainly clay, stone sand, metal oxide and so on. The process of making is more complex than wood floor. It needs to be screened, lapping, pressing, calcining and so on. Tiles price surface is smooth, cleaning and cleaning is relatively simple, and do not need special maintenance, long life. Hard material, heat conduction and other properties make small tiles waterproof and fire resistant. Because of the controllable production project, the marble tiles pattern is rich in variety. But some advantages are also a shortcoming. Hard kitchen tiles make feet feel less comfortable, and smooth ground makes people slip easily.

Imitation wood flooring is modeled on the appearance, size and luster of solid wood flooring. Wooden floor has the advantages of health, environmental protection, beauty and comfort. But better than wood flooring, its raw materials are easier to get than wood flooring, the price is relatively low, more economical and practical. The processing process is more, making the imitation wood floor pattern more style, and strengthening durability, but also overcome the shortcomings of the wooden floor is not good to handle. Although the imitation wood floor has many advantages, but the human factors are not controllable, the harmful substances in many imitation wood floors on the market are beyond the standard, and the security and the difficulty of choosing are added invisible.

The imitation wood floor tile has both the beautiful appearance of the wooden floor and the hard and clean tiles. This kind of floor tiles are not only the advantage of imitation wood flooring and tiles, it also combines modern high-tech and traditional handicraft art, which makes the wood floor tiles application more extensive, style more fashionable and generous, combination and collocation effect is more significant.

The maintenance misunderstandings of tiles.

/in /by

In our life, a lot of people, because of different hobbies, will use different ways to maintain the things in the home, of course, include the maintenance of marble tiles. But the sad thing is that many people, in the misunderstanding of maintenance, still think that their maintenance is correct, BARANA exposes the maintenance misunderstandings, can let us avoid such maintenance methods.

For the more stubborn and difficult to remove dirt, many people choose to remove the method is also different, a lot of people see stains on the tiles design surface, the strong acid cleaning stains, so that the tiles price surface is corroded to lose luster, sometimes stains still in the interior of the tiles surface. Sometimes the stain is cleaned with acid, but it will soon be dirty and easier to seep. The use of acid to remove stains is a quick and effective method, but it is easy to use or not be used by professional people, especially in the polished tiles. Otherwise, it is easy to destroy the gloss of the polished marble floor tiles.

Maintenance of tiles, many people choose wax, wax is also a certain skill. Many people think that wax can protect floor tiles better because they lack professional knowledge, but they do not know a mistake in tiles maintenance. Especially for the polished tiles, it is found that the surface of the polishing tiles have a stain on the surface of the polished floor tiles, and then the wax is reproduced immediately, and the original wax is not removed, so that the polished tiles will lose its gloss.

In the use of tiles, a lot of people will feel that the more dry the better the kitchen tiles, especially after the new decoration, we can see in many decoration experience, wall tiles after the end of the window to speed up the wind speed. However, it ignores the fact that bathroom tiles should also be locked in moisture. When the wall tiles design are dried, it not only needs moisture, but also more importantly, it must lock the moisture and ensure that the moisture does not drain. Daily mopping is also a way to conserve moisture.

For the more stubborn dirt on wood tiles, a lot of people will use some small tricks when they can’t get rid of them, such as cleaning agents and decontamination ointment. This kind of complex is correct. But some people will use the steel ball, think of the dirt removed, scratches can be solved, in fact, the practice is wrong, scratch no way to make up, and will also affect the gloss of cement tiles. In the maintenance period, waxing ceramic is a must to do. Before waxing, we must clean the glazed rustic tiles and choose the right products to wax the wood marble tiles.

The daily maintenance and cleaning of floor tiles

/in /by

Cleaning of oil stains and marble tiles can be cleaned by washing detergent and soap. Using a mixture of soap and a little ammonia and turpentine can clean the glazed tiles and make the tiles design more shiny. Polished tiles should be waxed regularly for 2-3 months. If scratches are found on the tiles surface, toothpaste can be applied to the scratches and can be repaired with dry cloth.

The kitchen floor tiles gaps can be used regularly to remove dirt from decontamination, and then brush a layer of water repellent in the gaps to prevent mold growth. Tea, coffee, beer, ice cream, grease and other pollutants use sodium hydroxide or potassium bicarbonate solution. Ink, cement and other pollutants use dilute solution such as hydrochloric acid and nitric acid. Paint, paint and other pollutants use special cleaning agent.

When clear the rust on ceramic tiles can be washed and washed with 2% oxalic acid solution and then cleaned with water. After grinding the powder with 3-4 vitamin C tablets, sprinkle it on the surface of the cement floor tile, then wash it with water for several times, and remove rust stains.

If it is rust on tiles price, it can be soaked with 10% oxalic acid, citric acid and water mixture, then wipe it with strong salt water. If fresh lemon is found, it can be squeezed with its hands and rubbed on the rust stains. It is repeated several times until the rust stains are removed and washed with soap and water.

The various colloidal stains on the bathroom tiles can be removed with banana water. The pure banana water is a colorless, transparent and volatile liquid, with a strong smell of banana, slightly soluble in water, soluble in various organic solvents and flammable, mainly used as a solvent and diluent for spray paint. For some of the hard to remove dirt on wood tiles surface, do not use steel balls or hard things to clear, although the stains are not, but the damage to the wall tiles, still exist, the left scratch is no way to repair.

How do the floor tiles be cleaned?

/in /by

The level of social life has been improving, white tiles has entered thousands of families, but after the use of floor tiles, naturally there will be a variety of forms, the emergence of various dirt, especially some difficult to clear the stains are more annoying people.

The use of multi-functional decontamination ointment, tiles  in the gap, should first use a toothbrush dipped in a few decontamination paste to remove dirt, and then brush a waterproofing agent with a brush in the gap, so it can not only prevent water and can prevent the growth of mould. The tiles design are often stained with greasy, rust and soapy dirt, especially at the joints of tiles. In order to keep the porcelain tiles surface clean  and not damage the brightness of porcelain tiles, you can use multifunctional decontamination cream to clean.

The surface antifouling of polished tile is the key. The porcelain tiles without antipollution treatment should be waxed in use, and the ordinary floor wax can be used. In order to avoid damaging the ceramic tiles surface during construction, the tiles surface is covered with knitted bags and other items that are difficult to decolorization. The only defect of polishing tiles is that after burnish, the pores are exposed, and oil and dust are easy to infiltrate.

Many brands of tiles design without antifouling treatment can be sold as qualified floor tiles, consumers do not understand the situation, paving is not concerned with the use of a stain. Barana tiles price give you a comfortable and clean home daily life. When paving new tiles on the old marble tiles, the cement mortar is very difficult to do. At this time, it is necessary to use the resin type stone bonding agent. It is not afraid of the greasy and stains on the mosaic kitchen tiles, and it has good bonding strength. Old tiles need to be refurbished, which generally requires that all tiles be removed and labor intensity is very strong.

If there is tea or other daily necessities attached to the tiles above, it should be scrubbed in time and clean with necessary cleaning materials if necessary. If scratches are found on the wood tiles surface, toothpaste can be applied to the scratches, which can be used for cloth wiping and repairable. You can be removed periodically with decontamination cream between tiles gaps, and then brush a layer of water repellent in the gaps to prevent mold growth.

The daily maintenance of light light colored tiles also needs to master some tricks. When you clean the tiles, you can use water and detergent or soap. When you wash with soap, add a little mixture of ammonia and turpentine to make the tiles more polishing.

Different contaminants of tiles should be used with different cleaners. The animal and vegetable fat, beer, coffee and ice cream on the mosaic tiles for sale can be cleaned with sodium hydrogen fluoride and potassium bicarbonate. While the sediment, ink, rust, mortar, agricultural tea, rubber on grey mosaic tiles can be cleaned with dilute hydrochloric acid, dilute nitric acid, dilute oxalic acid and dilute sulfuric acid. The paint and drawing pen fluid on the tiles can be cleaned with turpentine, pyretic acid or alkali.

The floor tiles stained with coke or vinegar can be washed with acid or alkali. The dirt stains on the tiles can be washed with linseed oil. The flooring tiles stains that are difficult to clean can be cleaned with special all-purpose water. The tiles daily clean household cleaning agent or detergent.