Posts

The details that are easy to be neglected in home design must be seen before decoration.

/in /by

Living rooms, bedroom and long passages require dual control switches. If there are elderly people in the family, they should switch the switch and socket to 1.5 meters away from the ground, so that children can not play with electricity. If necessary, you should outlets for appliances such as water purifiers, kitchen garbage disposers, smart toilet covers. The dining room and the living room ground to install a metal insert, used to insert a hot pot or the small warm stove used in the south in the winter, in peacetime with the ground flat, foot step out to prevent people from tripping over the wire wrestling.

If the room is covered with wooden flooring, you can put 1 square meter tiles behind the door, wear-resistant and clean. Some may lay paving mat, but the floor tiles mat is easy to dirty, so it is not economical in the long run. Live with the old man and prepare a shoe changing stool for them. The old man stooped directly, causing a spinal injury. The porch wants to use the locker, but the space is small, the entrance will be very crowded. In fact, it will be nice to change it into a hat hook.

Without the elderly, the TV in the living room is not necessary to buy, to buy a projector to connect to the set-top box, computer and so on. There will be children later, so that children will not want to watch TV all day. Don’t enlarge the tea table, big sofa and so on. The size must be measured in advance, and more space should be left. Space is not enough, do not buy big chandelier crystal lamp, one is to suppress, two is to live for a long time on the top of the ash several layers, I believe you do not want to rub. Choose wall-haung furniture or edge furniture off the floor. The most important function of the living room is to show and rest, do not store too much, and pile up in a mess. There is no sense of beauty. Save the living room space and prepare a chest of drawers for storage in the corner. Small space and height is not high when the ceiling, and not much practical function, but smaller.

The bedside cupboard is not necessary. It takes up the place, and everything in it is sundry. The newly married couple decorate their houses, and the baby bed must be laid on both sides of the bed. Wardrobe is the top priority. It should consider the structure of the wardrobe according to the composition of its own clothes, for example, the clothes hanging are mostly stacked. Two or more sockets should be designed on each side of the main bedroom head. In addition to charging the electronic equipment, it will also be used for hot milk and disinfector. If you want to set the location of the air-conditioning ahead of time, you’d better not face the bed.

Many small space houses want to make the baby room made of tatami, and it is really beautiful, but the damp place is really unsuitable and easy to mold. Families who are ready to have a second child have switches and sockets on the top or bottom of the bunk bed or two single beds. The whole house, especially the children’s corner design, or a small gadget for collision avoidance, is very cheap. The light should be soft, otherwise children will not have good eyesight. A night lamp should be provided for children’s room. Don’t buy furniture too early. Your baby’s eyesight is incomplete. It’s not suitable to see elements that are too bright.

Most people say that disinfector is not as practical as a dishwasher. Many family sterilizing cabinets will become expensive cupboards. The kitchen socket must be provided with five holes and switches to reduce the electrical appliance. We must make good use of the space of the kitchen wall, save some space with some hardware, such as leachate rack and kitchenware rack. The hardware of the cabinet is very important. Plan the location of kitchen appliances ahead of time, so that the socket can be conveniently reserved. The open small bar is very low.

There is a set of sockets near toilet closets, with a heated toilet lid. Happiness is much higher. Armrest and shower locations should be equipped with handrails to facilitate the use of pregnant women and the elderly. Dry and wet separation is necessary, although it will make the area look smaller. When you clean up, you know its benefits. The bathroom faucet can be drawn with a stretch style, and men at home have shampoo in the morning. Leave enough room for the baby bath. The odorless ground leak, you know its benefits. Using wind heating instead of bathing bullets, the strong lights of bathing bullets will stimulate the vision of the elderly and children, and the warm effect of wind heating will be better. A waterproof cover must be installed in the socket of the bathroom.

How is difficult for selection tiles and style matching, BARANA teach you in 5 minutes?

/in /by

Choosing tile is not an easy task. There are many kinds and styles. When selecting tiles, we should not only identify the quality of grey tiles, but also match them. When many people buy Tiles price, they run around the market without any clue, feel very helpless about it.

Tile belongs to the decoration main material, is the decoration expense main item. The quality and price of tiles on the market are also uneven. Many people do not know how to distinguish the quality of the ceramic tile sizes. Because of the loss of quality in the tiles, people usually choose to buy first-line brand tiles flooring, and spend more money to make peace. If the budget is relatively small, they will choose to buy tiles which are relatively cheap. Then, how can we choose the best tile when the budget is limited? How to pursue the best price ratio.

tile’s body is a very important index to judge whether ceramic tile shower are good or bad. Turn the tiles over and look at the back. The white clay is pure porcelain and good raw material. The side section of ceramic floor has obvious cross cutting pattern, which is usually made by small factories in production equipment. If we touch with our hands, we can also feel that the tiles are smooth and delicate. The tiles with poor quality has a rough texture on the side of the touch.

The difference between porcelain tiles and ceramic tiles is that the firing time and temperature are different. The difference is water absorption. The water absorption of porcelain floor tiles is very low, and it does not absorb water basically, ceramic floor tiles have obvious water absorption. Semi ceramic tiles design are also called ceramic wall tiles, which are far less dense than all tiles. They are not strong enough to resist pressure and impact. In daily home life, if you accidentally drop something onto the floor, the porcelain will easily be removed from the glaze, once the glazed surface is destroyed, it can not be repaired. If you choose porcelain tiles as wall tiles, remember that when laying tiles: Do not use cement. Make sure you use strong tile adhesive. Because marble porcelain tiles will be peeling off with cement paste, and the tile glue should not be mixed with cement paving, otherwise, the tiles will fall off later.

Floor tiles were first popular in pure color paving, and then developed lace patterns, patterns and dark patterns. With no more space for the pattern tiles, The designer began to work on the Tile’s figure . Some special tiles design always give people a very high and expensive feeling. In fact, there may not be a great difference in the price of tiles, but because of this unique beauty, it is very touching. Compared with the regular square tiles, the six corner tiles can be smart and simple. A large area of pure color paving makes the space simple and luxurious. Help you easily concavity out of the light luxury kitchen and bathroom. If you want to break the low tone of pure color, try random paving. Different color blocks collide with each other, highlighting the artistic sense of the geometric tiles surface.

The smooth flowing water tiles are like the ripples of the lake’s water, full of romanticism, it is suitable for small area home decoration, usually used in kitchen and bathroom wall tiles. The gradual paving method allows this area to transform into waves. If you want to use cheap tiles in large areas, try to choose a pure color style tiles. Or similar colors, tiles with deep shades can create an interesting sense of hierarchy. And the color and texture of the tiles are covered with walls. The whole space has a feeling of slow flow of water waves, especially suitable for bathrooms.

There are many changes in the stitching form of the three-dimensional triangular tiles. You can assemble them in various ways like jigsaw puzzle. Of course, different tile splicing will produce different effects, with subtle changes. Corrugated knitted tiles are suitable for outdoor applications. Under the cooperation of lighting, it can show the light and shadow effect that ordinary tiles cannot form, it’s like letting a building wear a woven coat.

How to choose tiles for home decoration?

/in /by

Tile is one of the most important materials in our family decoration. It can be used on the floor and wall. Some of them are also used in the kitchen stove. Therefore, the selection and matching of tiles can affect the effect of the whole decoration. It even affects people’s daily life. Therefore, for tiles to be selected, we first need to know the tiles from the following points.

Polished tiles are one of the most commonly used tiles. Because the surface of the tiles (3-4mm thickness of the fabric layer) is polished, it has the characteristics of bright, high hardness, wear resistance and scratch resistance. However, they are usually not tolerant of dirt, and are commonly used in public areas such as living rooms and restaurants.

The polished glazed tile is painted on the surface of the embryo body (porcelain clay and Tao Tu) with a thickness of about 0.1mm-0.2mm thick. It can be classified into full polished tile and semi glazed tiles. Full polished glazed tiles are flat, smooth, and bright. The semi polished tiles are concave and convex, and the convex areas are glazed, while the concave ones are not glazed. Its advantages are rich in color, rich in texture, and resistant to dirt, but the abrasion resistance is not strong. In addition to the kitchen, bathroom, balcony, other places are applicable.

Polished tiles are actually one of full body polished tiles. As the name suggests, the whole body is the same color and material as the bottom. If the surface is polished, it is a polished tile. The full body tile has the advantages of good wear resistance, which is often used in indoor and outdoor walls and floors. glazed rustic tile belongs to glazed tile, glaze on the surface of porcelain tile, deliberately making an old antique effect. For example, the year’s ring, the history of vicissitudes and so on, the glazed rustic tile has the advantages of anti slip, and often used in the kitchen, toilet, balcony, of course, can also be used in the guest restaurant, bedroom and so on.

The first impression of wall tile is that its size is small, smooth and bright, and often used on walls. Besides, what we need to know is that it is different from other tiles. The first is the thickness of the wall tile, the thickness of the wall tiles should be thin. The second is that the location used is different, the wall tile is used on the wall, and the tile can be used on the wall and the ground. The third manifestation is that the service life is different, the wall tiles should be short, and the tiles should be long. The fourth is that the water absorption rate is different, and the water absorption rate of the wall tiles is much higher. Therefore, it is important to note that when wall tiles are used, tiles must be water soaked, otherwise it will absorb the moisture of cement and cause problems such as warping and shedding.

Mosaic tiles include ceramic and glass. Glass mosaic tiles are a piece of tile made of small pieces of tile, so its color and style are rich and can create a warm family atmosphere, which can show the owner’s personality and taste well. And as long as you want to get the result, it can make an effect. In addition, it can be widely used in many places, and can also be used as a cross stone, a background wall, etc.

Microcrystalline stone tile is a new type of building material. The main method is to compounded glass ceramics on vitrified stone. With a strong gloss and permeability, the effect is also more grade, luxury, and the price is more expensive, so it is often used in the TV background wall.

Besides, there are other tiles, such as the wood tile, which we often used, on the surface of our traditional tiles, by a certain process to make its surface with a natural pattern of wood tiles. According to own needs, you can choose tiles suitable for your own homes.

When the colored tiles went into the kitchen, the beauty burst

/in /by

The color tiles are like a hasty traveler in the history of the river, and perhaps you still exist in the movie scenes of the 30s and 40s as the background of the last century. It bloomed in a special era, and gradually disappeared with the changes of the times. Be the regrettable and forgetting after the flourishing.


The beauty of colourful tiles can be very publicized, and it can also be very introverted. It is an unavoidable surprise to make pure and extensive representations. Mixed with wood tiles, creating a quiet and smart space, as a background wall, makes the whole space more colorful. Each type of colourful tile has unique texture and shape, making the visual focus of space easy. On the small ceramic tile, the colorful splendor color, the decoration prominent pattern, lets the family change the literature and art fan for a second.


The walls of the kitchen are almost covered with tiles, which are generally monotonous. Mainly based on practicability, neglecting the effect of decoration, so there are not many characteristics. If the entire wall is a single color tile decoration, it is inevitable that some boring, let people visual fatigue. If you use decorative tiles to form a visual contrast with other monochromatic tiles, you can easily create visual focus.
The laying of floor tiles can not only lay the tone for the design of the whole space, but also give play to the unique atmosphere of the individual. It can be used for large area surface laying as well as partial use, with the effect of dividing space. It is even possible to extend the floor tiles to the wall boldly, causing strong visual impact to leave a bright impression on people.


Porch, living room, restaurant or other areas, you can use colorful tiles very well. It looks like a carpet, but it’s easier to clean than a carpet. The charming display of the tone makes the space become smart instantly. If you worry about the use of tiles in large areas, it will make the space more messy and dizzy. You may choose to mix and match with other types of tiles. Whether elegant retro style or modern fashion, all kinds of unique texture of small colourful tiles will break the rigid space, so that the whole family does seem to have a lasting appeal. Local application of colourful tiles can become the finishing touch of space. Because of its own space, you can choose a very colorful pattern tiles, which can attract people’s attention. The pattern that captures the eyeball is the greatest feature. Small area, stealth colorful tiles decoration scheme, the exquisite details of the kitchen to the utmost extent, often can achieve amazing effect.


The floral colourful tiles are brightly coloured and have many patterns. They are very attractive in the decoration style. The coloured tiles and plain tiles can be used together to make the space more decorative. Using it as the decorative tile material of the theme wall of the bathroom, it can enhance the overall mood of the bathroom and make the space level more three-dimensional. Colourful floor tiles are similar to ordinary carpet, but they are easy clean than carpet. You will find that the colors patterns tiles of each tile have artistic expression.

What is the preparatory work for the tile paving?

/in /by

The tile paving is small and small. It seems to be very small. It seems to be very simple. It seems that there will be no big event, but it is always annoying if it is done. Details are very important, many of the problems, in fact, are not done in some details, tile paving is the same, with everyone to share some tiles paving, some often ignored small details.

The wall should be dealt with well. Some walls are cracked, or walls are connected to other materials, such as cement walls and woodworking boards. Before laying tiles, it is necessary to connect the wall cracks with wire mesh, then reinforce with cement, and then lay up tile again, so as to avoid cracking of later ceramic tiles.

Whether the tile needs water or not, it is necessary to see the specific situation. In the use of ordinary cement mortar paving, some of the higher water absorption of pottery tiles, that is what we usually say wall tiles, that is the need for water, and must bubble foot. And some floor tiles with low water absorption, such as polished tiles, marble tiles, etc., do not soak water, whether they stick to the ground or on the wall. There is another case. If it is paved with ceramic floor tile, no matter whether it is tile or floor tile, it needs no water. When the water is needed, you should pay attention to it. Every batch of tile time is as much as possible, and the water used is as clean as possible so as to avoid the color difference after the paving. There is also a point, the need to make water tiles as much as necessary to bubble water, how much to use in advance to bubble how much, especially when put to the back, do not make a whole body to bubble, if the bubble is not finished, it is unable to return.

About the powder of the tile billet. Magnesium Oxide and magnesium carbonate are a high temperature resistant white powder. Generally, the ceramic kiln floor tiles are at the highest temperature of more than 1200 degrees, when the tile bottom is close to melting (the expression may be inaccurate, but the tile embryo is soft). In order to avoid sticky stick of tile embryo and kiln, using the characteristics of high temperature resistance of Magnesium Oxide and magnesium carbonate, before the tile embryo entered the kiln, a layer of Magnesium Oxide pulp was brushed on the bottom of the embryo to play the role of isolation. This will avoid sticking sticky tiles and sticks in high temperature kilns. Therefore, sometimes we will find that there are many powders at the bottom of the billet, and we should try to remove the white powder before paving. Otherwise, it will cause the cement mortar to be stuck to the tile, causing the hollowing off.

Many people think that it is a waste of time to per pave tiles before paving. In fact, the old pottery people think that the front row of tile is to spend a little time, but in the row of tiles, can avoid the generation of some of the following problems, for example, when the tile, can look at the tiles of the supporting waist line, tile or processing tile and the main tiles with the main tile? Besides, there are obvious defects on the main tile surface, whether there is chromatic aberration, whether the size error is large or not. In front of the tiles, the old pottery also hopes that the owner can take out every tile that is to be used, and give a detailed account of the position, quantity and special requirements of the paving, which can avoid the paving error.

Before paving, we must clean up the wall. Before we scrape the putty wall, we need to shovel the putty and lay the tiles again. Otherwise, it will easily cause the hollow drum to fall off. If you want to use tile glue to paste the tiles later, you must make the wall level. If we use ordinary cement mortar to paste, we should pay attention to the proportion of cement sand, tile 1:3, floor tile 1:2, cement grade 32.5 cement. If the floor tiles are on the wall, it is suggested that tile glue or adhesive should be used for paving, so as to avoid the drums falling off later.

Why do you need to remove wax before paved the tile?

/in /by

When polishing tile, glaze tile, microcrystalline stone tile and other bright face tiles, many people will have such experience, think that the tiles construction is finished on the ground, is this true right? In fact, there is a very important process after the tile is completed, that is, wax removal, but it is such a simple process that is often easily ignored.
The ceramic tiles will be beforehand treated before they go out of the factory. The wax treatment is mainly to prevent the tile from accidental damage in the future, and the thick surface of the wax is also the main cause of the tile dark light, so the wax layer can be well restored to the original gloss of the ceramic floor tiles, but also the wax is also available. In order to improve the antifouling performance of the ceramic tile surface, the uniform wiping of the wax can well fill the small pores on the surface of the ceramic tile, and make the anti fouling molecular distribution more uniform on the surface of the antifouling layer, thus improving its antifouling performance and wear resistance.

Wax removal can restore the gloss of ceramic flooring, improve the antifouling performance and enhance the wear resistance. The main method of removing wax for ceramic tiles is surface wiping.
Commonly used materials: double fly powder, washing powder, flour, wax powder, powder and other powder, generally recommended to use double fly powder, double fly powder is also widely used to remove wax, the main chemical composition of the double fly powder is calcium carbonate, but also contains a small amount of magnesium carbonate, double fly powder itself is no toxic, no harm to the human body, but the removal of wax needs Attention should be paid to avoiding inhalation of dust and protective mask when operating. The surface of the ceramic tiles is cleaned first, and the wax is scattered under the condition of dry surface, such as several kinds of wax removal materials mentioned above, and then wiped with a rag or dry towel.

After the polishing process, the floor tiles, generally its surface must be treated with wax, and then add a layer of plastic film to cover the surface of the ceramic tile with the same size as the size of the ceramic tile; its function is to prevent the spillover of the wax layer and stabilize the wax layer on the surface of the tile; two, as the wax is an organic chemical, if it is an organic substance. For a long time exposure in the air will be oxidized, causing the wax layer to solidify on the surface of the ceramic tile and increase the unnecessary process in the later period. Three, the ceramic tile and the ceramic tile are isolated, and the tiles and the tiles are both faced and back between the tiles and the tiles in order to avoid the surface of the tiles before packing. The rules are stacked, and the plastic film plays a good role in isolating tiles when stacking in the face of the specifications.

If the tile is paving, it will not tear off the plastic film. It may cause the tile plastic film to be hard to tear off after the completion of the tile, and it will greatly increase the workload. At the same time, it is easy to cause the unnecessary after sale problem, so it must be plastic before the tile with plastic film is paving. The film is torn off, and this action is absolutely beneficial without harm, and this step is also the key.

In fact, the plastic film on the surface of the glazed ceramic tile is only one of the packing layer, the real product is the ceramic tile. The plastic film plays a very small role in preventing the scraping, because the plastic film is the polyvinyl chloride and polyethylene chemical composition material, which itself is the material with low hardness, brittle and weak, so the surface of the ceramic tile is plastic. The so-called protective effect of material film in the later stage of ceramic tile construction is not very effective.
After the tile application is laid on the ground, it is necessary to ensure that the surface of the tile is clean and tidy, and the gravel can not be left on its surface. It is suggested that the protective layer, for example, be best used as a carton to cover the ceramic tile surface in all directions.

How To Pave The Floor Tile More Beautiful And Practical?

/in /by

1.Bedding before the notice of floor tiles:
(1)the shop must be checked before the product, see the product packaging, qualified tiles are mostly use cardboard boxes for packaging floor tiles. The manufacturer’s name, product name, trademark, specification, size, grade, weight, color number and quantity shall be printed on the package. Avoid buying floor tiles that are inferior or inappropriate.
(2)floor tiles in use before soaking half a day, until the floor tiles are not bubbling before they can.


2.The process for floor tile:
(1)floor brick, bedding is the most important to have totally different tile joints, namely gap horizontal and vertical direction are on the straight, let new bricks as before on the wall of the same level. Otherwise, cracks appear between the bricks and bricks, which is not only beautiful, but also affects the actual use of the floor tiles.
(2)in the bedding floor tiles to knock a knock, listen to the sound to identify whether the cement is not real enough, hear gaps, then rework immediately.


3.When the floor tile is finished, cover the brick face with cardboard, etc., and walk on the brick face at least 24 hours later.

how to choose floor tiles

How To Choose Floor Tiles?

/in /by

how to choose floor tiles

1, if your home space is relatively small, it is like cooking area, bathroom area, you can choose a smaller size of the tile, so that the shop will not waste more, but also to make the space looks more coordinated. The utility model can also avoid the inconvenience caused by the construction of the large-scale cutting of the ceramic tile.

2, we should also pay attention to the selection of water absorption rate, which is an important indicator of its quality. We can pour some water on the back of the tiles. If the water disappears faster, the higher the water absorption rate is, the looser the texture is and the weaker the strength is, and vice versa.

How Should The Living Room Floor Tile Modelling Be Designed?

/in /by

how should the living room floor tile modelling be designed
1, in the market to select tiles, we must consider the Home Furnishing decoration style, now popular style is the new Chinese style, European style, and Mediterranean sun village style, Oriental garden style etc.. Home decoration involves tiles, sanitary ware, lamps and lanterns, curtains, kitchen cabinets, doors and windows, paint and other eight materials and jewelry, style of unity and coordination is extremely important, is to measure the quality of decoration and quality, the main concern. After determining the style, we should pay attention to consider some of their own personalized needs, security is very important.

2, we think everyone should know the wave line, and its role is to make the living room floor more surplus change, some lines overall looks particularly artistic charm. Mainly with some tiles and the main color of the tiles from the processing, the general use of dark tile based processing, and now there are special wave matching antique options.

3, there are a lot of people will give the living room floor tiles for decoration and flex spline in shape, is actually the tile ground decorative painting processing, some high-end brand with lots of patterns to choose from. General should pay attention to the selection, yarn, color and other floral to ground tile color and pattern to be consistent, mainly used in the door or the living room, dining table, the table below.

What Are The Advantages Of Imitating Marble Tiles?

/in /by

In the past, most of the tiles were mainly made of matt tiles. Now, with the improvement of the technology, the material has changed to polished tiles. The material and process changes make the brick face look more luxurious and the visual effect is better. Tile texture of natural and fresh, color and natural marble can almost fake true.

Natural marble has many shortcomings, it is not only heavy weight, construction is difficult, but also there is a certain radiation, so people will not be laying a large area in the decoration. But imitation marble tiles broke the limits, it is not only easy to cut, and whether it is in art, mosaic, sculpture, and ground applications are aspects of combination.

Natural marble although very beautiful, but the difficulty of maintenance is relatively large, the use of a long time will appear oxidation discoloration. The imitation marble tile is a good way to avoid such problems, it is not only very beautiful, but also with high brightness, low water permeability, no radiation and other advantages, more suitable for indoor public space.