How should ceramic tile put up? It might seem simple, but it’s not. Should pay attention to all sorts of the skill of tiling and the use of auxiliary material, ability lets ceramic tile affixed more firmly, the surface is more beautiful. Today come with ceramic mesh to study together, ceramic tile laid how to be more secure.
1.Avoid ceramic tile water absorption rate excessive choose ceramic tile, need key check the water absorption rate of ceramic tile. Drop the water on the back of the tile to see how fast the water will soak. In the same way, the slower the absorption, the greater the density of the tile.
2.Avoid the tiling of the tile on the back of the tile to fit tightly with the wall, and the back of the tile will generally be designed. When the grain is deep, it can ensure that the tile and cement mortar layer will not fall off when it happens.
3.Sand is best chosen for sand and sand, the deployment of the cement mortar strength is higher, but if the strength is too high, can also lead to some bad results, such as using the leveling the ground will be cracking.
4.The base that tiling tile should be handled well to avoid ceramic tile empty drum, the metope of tile shop first, ground floor must deal with clean. Be sure to remove all kinds of dirt on the wall, and mention the water wet
5.When the cement mortar needs to be plump and evenly mixed with the back of the blade of the cement mortar, it should be noted that the cement mortar should be full and even and not cut corners.
6.Set aside 2-5mm expansion joints for tile tiling. If there is not enough expansion joint, under the action of thermal shock expansion or moisture expansion, the stress can occur between adjacent tiles, causing the empty drum to fall off.
https://baranaceramic.com/wp-content/uploads/2017/09/How-Does-Ceramic-Tile-Spread-Stick-Relatively-Firm-1.jpg600900administratorhttps://baranaceramic.com/wp-content/uploads/2025/09/logo.pngadministrator2017-09-14 03:17:372019-09-03 06:09:21How Does Ceramic Tile Spread Stick Relatively Firm?
The kitchen space is damp and easy accumulation of dust, oil, so in the choice of floor tiles, to choose the anti oil, good antiskid performance of the ceramic tile, kitchen space are generally not very large, so the tile specification is best not more than 300 X 300 mm, so as to better grasp in laying usage.
Is the rate calculated tile loss to do first before the renovation, usually based on three percent of the loss rate calculation is the most appropriate, when planning the first estimated dosage materials and the amount of auxiliary materials, usually calculated as amount of tiles: the number of housing area, floor area +3%= tiles needed, and auxiliary materials per square tiles probably need to use sand, 12.5 kg of white cement 108 glue and 34 kg.
Third, old brick renovation
If the house or second-hand housing renovation of the kitchen, remember that destroyed the original tiles, re do waterproof layer, under normal circumstances, when the original tile does not appear to damage, the owners may wish to consider the reservation, which is equivalent to saving a lot of overhead. If the tiles have been damaged, or the surface of serious wear and tear, stains are, they will be removed, re laying. If the floor tile basically intact, don’t be replaced, but it must be pointing at all clean, this is because the tiles are used for a long time, the seams accumulated too much bacteria or stains.
https://baranaceramic.com/wp-content/uploads/2017/09/How-To-Pave-Kitchen-Tile-1.jpg600900administratorhttps://baranaceramic.com/wp-content/uploads/2025/09/logo.pngadministrator2017-09-14 02:54:282019-09-03 06:10:13How To Pave Kitchen Tile?
Ceramic tile of choose and buy not only depends on its beautiful appearance, if only judging from beautiful degree tend to ignore the immanent quality of ceramic tile, once the quality is unqualified, caused of repair, water in the future, it is regret that quality is the life of ceramic tile products.The quality of ceramic tile is good or bad, want to see content of three aspects commonly: wear-resisting degree, absorb water, hardness. According to the use of ceramic tile and place is different, the range of choice is more extensive. Kitchen and toilet, because use frequency is taller, so need to choose wear-resisting degree relatively high, compared with our ordinary family, choose wear-resisting degree is in moderate to be able.
The wear-resisting degree of ceramic tile will be marked on the top of the price tag, or carefully ask the salesperson, understand the quality, also be the source of important information. According to the kitchen ceramic tile is afraid of oil pollution, the principle of ceramic tile is afraid of water, toilet when choosing the kitchen ceramic tile, often want to consider the water absorption of ceramic tile, if the ceramic tile with low water imbibition, its density of ceramic tile is taller, also to have some stains and water barrier. Especially in the environment of the bathroom, low water absorption can ensure that ceramic tile does not overexpand and produce deformation. It is very simple to judge the high and low water absorption rate of tile, as long as it drops a drop of water on the back of the tile of the sample, and observe whether it can absorb rapidly.
Hardness is also an important factor of ceramic tile quality. High quality ceramic tile general hardness is high, the toughness is strong, not easily broken. The inner quality of tile can be checked by tapping the debris. The two tiles are lightly tapped. If the brick’s voice is crisp and the sound of some metal indicates that the inner quality is very good and the hardness is high; If the sound is hoarse, the inside of the brick may have a crack, the hardness is not high.
Randomly to produce four specifications as ceramic tile, flat to the ground, the middle gap as small as possible, if it is tile must use four pieces to piece together a complete pattern, if relatively flat, when work that shows ceramic tile more conform to the specifications. The advantages and disadvantages of bricks are sometimes not easy to judge, especially when buying now, they are on board, inconvenient to pick off and compare carefully.
https://baranaceramic.com/wp-content/uploads/2017/09/Kitchen-And-Toilet-Ceramic-Tile-How-Should-Choose-Better-1.jpg600900administratorhttps://baranaceramic.com/wp-content/uploads/2025/09/logo.pngadministrator2017-09-13 05:54:232019-09-03 06:10:38Kitchen And Toilet Ceramic Tile, How Should Choose Better?
1, at home free time, most of the women will be cleaning, for the floor, we usually have to clean up, it is best to regularly clean, select the appropriate cleaning agent for removal. Acid and alkali properties of the cleaning agent can effectively remove ceramic tile surface stains, but because of the acid-base composition of ceramic tile surface may cause corrosion, it is not suitable for frequent use. Should use more ph value for the neutral cleaning agent, daily cleaning can be used household cleaning detergent, soap and other cleaning.
2, on the tile, usually in each crevice, the accumulation of dirt and bacteria are the most, so in cleaning and maintenance, need to be particularly careful. Which is the main raw material and white cement putty, so the dirt adhesion of the above it is difficult to clean, in tile paving completed and daily after cleaning, can be in the crevice of a waterproof agent with brush brush, can play the role of waterproof mildew.
https://baranaceramic.com/wp-content/uploads/2017/09/Kitchen-And-Toilet-Ceramic-Tile-How-Should-Choose-Better-1.jpg600900administratorhttps://baranaceramic.com/wp-content/uploads/2025/09/logo.pngadministrator2017-09-13 02:40:152019-09-03 06:11:10How To Maintain Waterproof Floor Tile?
The similar appearance, the superior performance of ceramic tile, marble together makes this different quality marble tiles become popular with users of the popular building materials, but in the face of a variety of marble tile brands on the market, with only a bibulous rate, the basic testing factors such as stiffness is not enough to help us distinguish good marble tile,The first marble tile quality evaluation standard of the industry “marble ceramic tile 7 star standard” came into being, let’s look at how simple and specifically choose marble ceramic tile.
1.Fidelity
In terms of its nature of ceramic tile, marble tile ceramic tile is a kind of imitation wood, imitate the texture adornment effect is its important value, so the fidelity is selected the first parameter to the ceramic tile, marble to emphasize its fidelity: stone should ≧ 99.9% reduction degrees, will be in comparison with natural marble, ceramic tile on the premise of removing impurities, higher similarity is preferred, stone should ≧ 99.9% reduction degrees.
2.The duplication
Stone attractive appreciation of a play feature lies in its unique natural, to condemn the change of grain, and used in ceramic tile decoration, in order to avoid duplication of texture bring stiff feeling of the space, so the ceramic tile on the stone should try not to appear to repeat: stone texture should not repeat area ≧ 5 square metre, extract a case of tile ceramic tile on the floor, to see if the pattern repeat, repeat degree is lower, the better decorative effect.
3.Accurate printing degrees
Inkjet technology is nowadays the main technology of high-quality marble tile surface color layers of permeable brick should be of high quality marble, perfect reduction natural color of natural stone material, real and solid: picture for at least 360 dpi precision of 0 grid and high precision spray printing, the scene to identify pattern is clear, the place of ceramic tile 10 cm distance to the naked eye can not see the grid.
4.Bo changes degree
In essence, the water absorption rate is the criterion, the low water absorption rate is not easy to absorb dirt, the quality is better. Good marble tiles should be very low water absorption, the higher the degree of vitrified, bricky system stronger, more not easy ooze water: water absorption should be ≦ 0.05%, the water droplets on the back of ceramic tile, slow water infiltration or not bibulous, the greater the density of ceramic tile, the better the quality.
5.Stiffness
As ceramic tile, everyday use in the family in general can’t avoid all sorts of friction or collision, so the stiffness is also one of the most important elements of ceramic tile, marble in order to avoid the ceramic tile is easily damaged, durable marble tile should have higher hardness: thematic mohs hardness ≧ 6, the scene with blades and other hard iron swiping in ceramic tile surface, no scratches on the top grade.
6.Self-cleaning degrees
Once decided to use ceramic tile, decorate is generally the use of large area, if the higher the degree of self-cleaning ceramic tile, is that much more convenient to do when using, starting from the users the best experience, marble tiles need good self-cleaning ability, can withstand the daily life of the stain liquid such as: the anti pollution coefficient must be ≧ 5, ink, soy sauce, vinegar, etc of drop in ceramic tile surface, after a short waiting to wipe clean, no residue after taste.
7.Mass density
Mass density is closely related to ceramic tile weight, in the case of equal size, weight of ceramic tile ceramic tile quality means that the greater the more thick, material, density higher and higher, bricky system has stronger: ceramic tile should ≧ weight 25 kg per square meter, compare different marble tile cutting into the same specifications weighing, the person that weigh is preferred.
https://baranaceramic.com/wp-content/uploads/2017/09/Simple-and-Practical-Marble-Ceramic-Tile-To-Buy-Seven-Standard-1.jpg600900administratorhttps://baranaceramic.com/wp-content/uploads/2025/09/logo.pngadministrator2017-09-12 08:58:002019-07-30 08:15:55Simple and Practical Marble Ceramic Tile To Buy Seven Standard
What can you do to get on the ground for a dozen hours every day? Super long working time is very testing the quality of floor tile, how to choose quality floor tile has ensured ground to use sex and beautiful degree? Let me tell you.
1.Look at the appearance
Floor tile color, color should be uniform and complete, surface smooth and smooth, no particulate matter raised, ground brick edge rules. Can take a few pieces from a box of floor tile to see whether the defect such as chromatic aberration, deformation, damage.
2.Listen to the voice
The quality of floor tiles can be distinguished by listening to sound. Use hard objects to tap the floor tile, the more the sound is clear and the porcelain degree is higher, the quality is better; The more cloudy the sound, the worse the quality.
3.Drop beads
Drop a few drops of water on the back of the tile to see how fast the water is absorbed. Slow water absorption indicates that the tile density is close and the quality is excellent. Water absorption quickly indicates that the tile density is sparse and the quality is poor.
4.Amount of side length
The edge length accuracy of floor tile is higher, the shop post effect is better. Measuring the length, size and thickness of each tile with a tape measure, the accuracy is high quality, easy to construct, and save time and accessories.
5.Observe the hardness
The better the floor tile is, the longer it will be used. Good hardness, strong toughness, easy to break is the top grade. Use two pieces of broken tile edge to touch each other, see the fragment fracture place leaves is the scratch or the powder can judge ground brick hardness, leave the hardness of the scratch high, scattering powder hardness is low.
https://baranaceramic.com/wp-content/uploads/2017/09/Listen-To-The-Sound-To-Choose-High-Quality-Tiles-1.jpg600900administratorhttps://baranaceramic.com/wp-content/uploads/2025/09/logo.pngadministrator2017-09-07 03:29:582019-09-03 06:12:02Listen To The Sound To Choose High Quality Tiles
As is known to all, decorate choose ceramic tile is very important, but if you buy a good ceramic tile, post didn’t pay attention to the shop is very damaged engineering of one thing, the small make up today is to teach people, must pay attention to the 5 items in the shop sticks ceramic tile.
1.The ceramic tile should be soaked thoroughly Ceramic tile are through full immersion in front of the shop is stuck, it is to give the pore to absorb moisture, ceramic tile in the shop is stuck not easy to appear the phenomenon of empty drum, fall off, if not immerse directly to the wall ceramic tile, is likely to be sucked through the moisture in the cement directly to the ceramic tile, reach a certain amount of time, ceramic tile can appear even crack, this will cause a lot of waste ceramic tile, and the quality of the shop is stuck is bad.
2.Choose high-quality cement sand Ceramic tile should want to have good spread quality, must choose high quality cement sand, such ceramic tile can stick tight solid; The main point of selecting cement is to check whether it has QS certification, and to see if it has a shelf life. If it is past its expiration date, it is better not to choose. Sand had better choose river sand, river sand contain water is bigger, paste effect will be better.
3.Three, cut ceramic tile had better put in the position of corner
Cutting ceramic tile seems always seem to be some uneven, so the location of the best cutting ceramic tile is in the corner, this position at the end can use sealant to seal, does not affect the housing decoration effect. If you put it in a prominent place like a window, it will affect the beauty of the house.
4.The first brick should be selected
The first brick in the seat position to the full range wall ceramic tile, so the location of the first piece of ceramic tile must be chosen, if there is an error in the location of the first piece of ceramic tile, the ceramic tile of the entire wall will be warped.
5.Five, must achieve wall pressure ground
Wall pressure is above the floor tile of wall brick wanted, the advantage is not water, the water will flow down the wall brick in the wall and floor tile surface, easy to clean, because the more troublesome, so some bricklayer’s looking for a variety of reasons not willing to do, this is decorated must supervise bricklayer’s owner, let them do the project well.
https://baranaceramic.com/wp-content/uploads/2017/09/There-Are-Five-Problems-To-Pay-Attention-To-Tile-1.jpg600900administratorhttps://baranaceramic.com/wp-content/uploads/2025/09/logo.pngadministrator2017-09-05 04:13:352019-09-03 06:12:32There Are Five Problems To Pay Attention To Tile
Natural stone material because of its grain nature, have very high adornment effect, so attract high-grade house, the hotel USES, but natural stone material is scarce resource, have necessary growth cycle. And the emergence of marble tile, not only solved the natural defect of natural stone material, also brings a new selection, to reduce damage of the natural environment conditions, can also enjoy marble adornment effect.
1. Impact resistance
The natural marble has the crack, fragile, the processing procedure requires very high, slightly unguarded will cause the fracture, the wastage when the decoration works; The marble tiles are made from physical pressing and chemical burning, which are hard and can be cut according to the actual decoration of consumers.
2. Fold resistance
Natural marble is easy to fold and easy to break, the personality is a big long board, the timely back glue fixed net, open groove and steel bar, the natural marble transport, the installation and the post is still very easy to break; The marble tiles are made of a hard and dense texture, which is hard and dense. The average car is not crushed by the bricks.
3. Abrasion resistance
Natural marble has a hardness of only 3 grade, and it is easy to wear and wear when used on the ground for a long time. Marble tile mohs hardness 4-5, surface with glaze protection, product super wear resistance.
4. Pollution resistance
Natural marble is mainly composed of natural calcium carbonate deposition, surface crack is more, easy penetration, all kinds of goods that occupy the home is infiltration into the marble, surface cleaning not clean, professional care is expensive; Marble ceramic tile surface is the glaze layer of high temperature firing, the stain is completely impermeable, and after polishing treatment, the surface is smooth, clean and convenient.
5. Defective color difference
Natural marble TianRanXing lead to marble surface texture color, defects, even if there is design and color is uniform flawless marble texture, the price also is very expensive, common natural marble will through filling adhesive, dyeing processing; Marble ceramic tile specialized production, raw material, process is completely controlled, flawless and chromatic aberration.
6. Production process
Natural marble is extensive mining and simple processing, and semi-finished products are not. At the same time, due to the irreducible nature of the product and the mineral resources, the supply is unstable, the replenishment is almost impossible, and the personal character of the family is that large engineering projects are difficult to control in the supply and construction period. Marble tiles are the finished products of standardized industrial production. The dimensions can be made according to the requirements. The products can be bought and used, the supply is stable, and the quantity can be delivered on a timely basis. The construction period is guaranteed.
7. Water absorption rate
Natural marble’s natural nature leads to small pores and cracks in the marble surface, easy to seepage water and high water absorption rate, which is why the marble cleaning nursing can not use water. And marble ceramic tile because of surface glaze is dense smooth, the absorption rate is less than 0.3, so marble ceramic tile can rinse clean with water.
In the future development trend of marble tiles, the prospect is good, because stone still has many natural defects. Natural stone as a scarce resource, one day will be mined, some stone less thousands of years, many hundreds of millions of years will constitute, we cannot wait.
https://baranaceramic.com/wp-content/uploads/2017/09/Marble-Tiles-Once-Again-Subvert-Your-Perception-1.jpg600900administratorhttps://baranaceramic.com/wp-content/uploads/2025/09/logo.pngadministrator2017-09-04 03:36:452019-09-03 06:13:03Marble Tiles, Once Again Subvert Your Perception
1, if your home space is relatively small, it is like cooking area, bathroom area, you can choose a smaller size of the tile, so that the shop will not waste more, but also to make the space looks more coordinated. The utility model can also avoid the inconvenience caused by the construction of the large-scale cutting of the ceramic tile.
2, we should also pay attention to the selection of water absorption rate, which is an important indicator of its quality. We can pour some water on the back of the tiles. If the water disappears faster, the higher the water absorption rate is, the looser the texture is and the weaker the strength is, and vice versa.
https://baranaceramic.com/wp-content/uploads/2017/07/how-to-choose-floor-tiles.jpg600900administratorhttps://baranaceramic.com/wp-content/uploads/2025/09/logo.pngadministrator2017-07-04 02:03:252019-11-27 09:40:31How To Choose Floor Tiles?
1, in the market to select tiles, we must consider the Home Furnishing decoration style, now popular style is the new Chinese style, European style, and Mediterranean sun village style, Oriental garden style etc.. Home decoration involves tiles, sanitary ware, lamps and lanterns, curtains, kitchen cabinets, doors and windows, paint and other eight materials and jewelry, style of unity and coordination is extremely important, is to measure the quality of decoration and quality, the main concern. After determining the style, we should pay attention to consider some of their own personalized needs, security is very important.
2, we think everyone should know the wave line, and its role is to make the living room floor more surplus change, some lines overall looks particularly artistic charm. Mainly with some tiles and the main color of the tiles from the processing, the general use of dark tile based processing, and now there are special wave matching antique options.
3, there are a lot of people will give the living room floor tiles for decoration and flex spline in shape, is actually the tile ground decorative painting processing, some high-end brand with lots of patterns to choose from. General should pay attention to the selection, yarn, color and other floral to ground tile color and pattern to be consistent, mainly used in the door or the living room, dining table, the table below.
https://baranaceramic.com/wp-content/uploads/2025/09/logo.png00administratorhttps://baranaceramic.com/wp-content/uploads/2025/09/logo.pngadministrator2017-07-03 02:19:222019-11-27 09:40:38How Should The Living Room Floor Tile Modelling Be Designed?
