Do you know how to decorate the tile in the bathroom?

The bathroom is also wet because it needs water, so the decoration bathrooms are mainly paved with tiles. Anti skid is very important, especially in the shower room area. Skid resistance is an important consideration for bathroom floor tiles, and safety is the most important. If there are elderly people in the family, you can consider installing a handrail in the shower room area. Because the bathtub itself is relatively slippery, the handrail can also be installed at the edge of the bathtub.

In the shower room area, the whole block of marble is used for trenching, in addition to skid prevention, it can also guide the removal of water. Consider cleaning. Do not use rustic tiles with heavy surface pits. Rustic tiles are suitable for many style collocations, but there is a kind of glazed tiles that are not recommended to be selected as flooring tiles, that is, the surface texture of the concave and convex is deep, because these pits are easy to deposit filth because of the long time. Floor tiles with heavy surface texture are difficult to clean.

Several suggestions for collocation of bathroom tiles: The color and type of mosaic tiles should not exceed 3 style, otherwise it will be chaotic. Gray and black appear mysterious and advanced, but the space will be dim and the lights should be well matched. The color of the walls and ceramic should be the same or shallow or deep, otherwise it will be “heavy headed”. The flower tiles are more suitable for small areas, and tiles are not suitable for the whole floor or wall.

The floor flower tiles or flower pieces should be partially decorated and not suitable for large area use. Pure white tiles are suitable for making wall tiles for b, white wall tiles and grey floor tiles are better. Pure white tiles are recommended to do dark seams, and the level is clearer and obvious. Black, white and grey are more classic collocation, white wall tiles + gray floor tiles + Black hardware parts, plus other ornament, integrity is stronger. White marble tiles or marble design tiles can be used. Because of the natural texture of the stone, there will be a natural sense of superiority. Gray tiles are the good color, with white bathroom and silver hardware, faucet, integrity is very good. Appropriate wood color can neutralize gray coloring, for example, bathroom cabinet can choose wood color.

Gray is the dark. color, and usually is a dumb tiles design (better than light color), so it needs a little bit of effort in the combination of light, such as the combination of light, light belt, light belt and so on. Apart from pure grey color tiles, there are also some changes in gray tiles. If the color is not easy to grasp the change, we can also consider the variation of the specifications of the tiles, such as gray tiles, and match the hexagon tiles with the subway tiles. Black high and cold, but it will really make the whole space dark, which has to be considered. Rustic tiles are suitable for the style of pastoral, Mediterranean, American country and so on. Basically there are two kinds of tunes, one is the warm brown color. In addition to all ceramic tiles, it is possible to consider the waterproof latex paint for the upper half wall, the shower area or the recommended ceramic tiles, comparing the waterproof and moisture resistance of the tiles.

Sticking and maintenance techniques of floor tiles

The laying of wood tiles is also an art of line and surface. It can adopt different combination of lines and surfaces to create aesthetic spatial style effect. The tile design is laid on the seam: the conventional laying method is used to tile the marble tiles or to erect them. The tiles are laid on the side: the usual method of laying is good, only for square cement tiles. I-pattern: tiles price are misplaced and become separate I-shaped patterns. Composite tile: multi specification, combination paving. When paving floor tiles is applied, the method of mixed placement can ensure that the tile reaches the natural and smooth texture effect, and the flooring tiles texture and color level are strong.

Before laying the ceramic floor tiles, the 325 cement and sand are mixed into plain mortar in the proportion of 1:3, and the Microstone stone tiles are recommended to join the fine sawdust in the proportion of 8%-10%. Line and water to moisten the ground: pull two vertical lines on the treated ground and use the horizontal ruler to adjust the level; the ground is sprinkled with concrete water to benefit the construction, but it should not be sprinkled in a large area. Mortar floor: put the well mixed mortar on the sprinkled ground, and make it neat and symmetrical. Scraping: use wood ruler to evenly smear the mortar and check with a horizontal ruler.

Pre paving. Before the formal paving cheap floor tiles, according to the form of paving to determine the layout of the floor tiles price, such as the direction of the pattern, the product should be shown in the direction of the air to look for space pre paving, check whether the color tiles have color difference, uneven, edge collapse and other conditions. Pre placement helps to find problems and correct problems. Leveling: the tiles are laid on the plain mortar layer first, and the rubber hammer is flattened and compacted with the four sides. Then the bathroom floor tiles will be removed. The thick and smooth surface layer will be obtained. If it is found that there is an unevenness, the mortar should be filled and the bottom layer is smooth.

Smear pulp: 1:2 cement mortar on the back of the kitchen floor tiles, leveling, leveling, ensuring that the four sides are scraped with mortar and uniform, the thickness is about 10mm, the comb can be combed in need, so that the effect is more uniform. Draw a good line according to the size of the ceramic tiles body, the slit is reserved when the line is crossed, the polished tiles remains 3-5mm, the rustic tiles leaves 5-15mm, and the microcrystalline stone tiles remains 3-5mm, avoiding the difference between the concrete and the ceramic thermal expansion and cold contraction coefficient, and the same 3-5mm is left to the wall with the wall.

In the course of paving stone floor tiles, tiles and paste should be scraped and slit on the porcelain tiles seams and closely knit. In addition, appropriate amount of color additives should be added to the customers’ needs. The paving marble floor tiles are completed after 24 hours to walk and scrub. Clean the tiles surface thoroughly with clean water mixed detergent, and the beautiful floor and wall will appear before your eyes.

Many people want to make seamless paving marble tiles price during construction. In fact, this construction method is not appropriate. Because of the deviation of tiles length, right angle and edge straightness, there is no error in tile tiles. There will be some errors in the construction process. The most important point is that any object has thermal expansion and contraction, and the large marble tiles is no exception. When the gap is too small, the strain ability of the small floor tiles to the environment becomes worse. Because of the change of temperature, the natural stone marble tiles will be squeezed from each other and lead to the crack of the tiles surface, and the normal service life of the all marble tiles will be shortened. The size of the tiles seam should generally be about 3-5mm, and the minimum should be between 2mm. The special effect should widen the gap.

The construction base must be smooth and dry and clean surface, dust free soil, no oil, No skin, powder and other phenomena can not be raised. During construction, the ground use 10mm’s tooth – shaped mantle knife, using a mantle knife to portray the binder with the texture in the polished floor tiles, so that the polished marble tiles and the binder are fully bonded to keep the evenness and strength of the bond. It is recommended to moisten the base surface with water on the base and dry climate. The selection of the seam time, the time used in the general seam is 24 hours after the polished porcelain tiles, that is, after the polished porcelain  floor tiles is strong, the seam time is too early, which will affect the white floor tiles, The color of the joint should be close to that of the floor tiles, except for special effects. For example, pure white tiles does not use dark color sealant, because the visual effect of black tiles edges is easy to appear.which will cause the uneven height or loose and loose.

Generally, polishing tiles and glazed tiles paved with light are suitable for sanding tiles and rustic tiles suitable for sand selection without sand. When sewing, use the slitter to squeeze the sealant until it is less than 0.5mm below the polished stone floor tiles surface. Clean the white polished floor tiles noodles in 15 minutes. Paint the waterproof agent 10 hours later. Construction conditions: ambient temperature is 5~40 C, and bad weather should be stopped.

When cleaning the marble stone daily, try to use dry towing, less wet towing, local dirty or stains. Household cleaners such as detergent and washing powder can be used for cleaning. If wet towing, dry hauling after dragging, open windows and doors to ventilate and dry the ground quickly. Cleaning the floor tiles with soap or a mixture of ammonia and turpentine can make the wood marble tiles clean and bright. The gaps between tiles can be cleaned regularly with a decontamination paste, and then brush with a brush to crack a layer of water repellent to prevent mold growth. Slight scratch treatment of wood floor tiles: apply toothpaste to the scratches, wipe it repeatedly with soft dry cloth, then apply a small amount of marble polishing wax, then dry with a dry cloth to shine. Regular waxing for common marble tiles can achieve long-term protection. The best time is 2-3 months.

Floor tiles, choice this way!

Floor tiles, as an indispensable building material in modern decoration, have a wide variety and various choices. Many people will be puzzled when choosing marble tiles. This requires us to have a good understanding of the types of flooring tiles.

They are divided into glazed tiles, full body tiles, polished tiles and ceramic brocade tiles (mosaic tiles) according to the technology. Glazed tiles are the tiles treated by glazing. The surface is made of glaze. The main body is divided into two kinds: clay and porcelain clay. The back of the clay is red, and the back of the porcelain clay is gray. Features: rich color patterns, many specifications, clean and convenient, and strong surface strength, widely used in wall and floor decoration.

The full body tiles are an unglazed porcelain tiles with good skid resistance. Most of the skid tiles belong to the full body tiles. Technology: the rock fragments are pressed by high pressure, and the material and color of the front and back surfaces are identical. Advantages: the price is moderate, wear-resistant and moisture-proof.

The polishing tiles, as the name suggests, are a kind of bright tiles made by polishing or polishing the surface of the full body tiles, and belong to the full body tiles. Polished floor tiles are hard and wearable and suitable for use in most indoor spaces except bathroom and kitchen. On the basis of applying the technology of infiltrating soluble salt, polished stone tiles can make all kinds of imitation stone and imitation wood effect. Advantages: no radioactive elements, basic control of no chromatic aberration, large bending strength, thin tiles and light weight. Shortcomings: easy to dirty, anti skid performance is not very good.

Ceramic mosaic tile, also known as mosaic tile, is an ad hoc existing tiles, firing with high-quality porcelain clay. Features: generally, it consists of several small size tiles, such as 18.5×18.5x5mm, 39x39x5mm, or hexagonal 25mm. It is widely used in indoor small area wall and outdoor size and metope. Advantages: color and diversity, solid quality, durable, easy to clean, acid and alkali resistance, wear resistance, fire resistance and so on.

The selection of marble porcelain tiles is not enough. We need to know how to select the quality of ceramic tiles. Look at the color uniformity of the tiles design, the surface finish, and see if there are any defects such as chromatic aberration, deformation, lack of edges and corners. The harder the tiles price are, the more clear the voice is. The higher the glazed degree, the better the quality. If the water is dripped on the front side of the bathroom tiles, the quality will not be good if it spreads. The size of each wall tiles are measured with a tape measure, and the accuracy is high. Use ordinary knife to scratch the surface of the tiles, leaving no scratches on the surface, which shows that the floor tiles design have strong wear resistance. The tiles are suspended and people stand on the outdoor tiles. If the wood tiles are basically not damaged or cracked, they show good load-bearing capacity. A good style tiles will not be damaged after a vertical fall. Good tiles have high density, heavy weight, relatively solid, uniform thickness, and poor quality tiles are relatively light in weight.

How much is the size of the floor tiles better?

Floor tiles as a mature decoration material, it has the advantages of easy cleaning, durable, rich style and so on. So the flooring tiles are the first choice of ground materials for most family decoration. When choosing tiles, besides the color style, there is another important determinant that is the size.

The living room is generally the largest space in the family, so the living room usually chooses the larger size tiles. Usually the living room is 600mm or 800*800mm marble floor tiles, to see the size of the specific area, if the living room area is very large, you can also consider 1000*1000 or more big size tiles.

To choose the size of the style tiles of the porch, we should first look at the pattern of the porch. If the door is the door of the guest restaurant, it is not necessary to stick to the size of the different specifications. You can use the sideline to take a circle to make the space seem independent. For an independent entry, a larger area can be modeled independently, while the smaller one is the choice of 300*300mm or 300*600mm tiles.

Generally, most of the family is now decorated when the bedroom is a wooden floor tiles, but considering the wood floor is not good, the family will choose to stick to the floor tiles design, then the bedroom tiles, tiles specifications are usually 400*400mm, 600*600mm.

Kitchen as a cooking space, when cooking in the high frequency of activity, so it is recommended to choose a better cement tiles, and in size specifications, the kitchen floor tiles are generally chosen as the main 300*300mm. If it is an open space kitchen, you can consider size 600*600mm tiles design, look at the atmosphere. Like the kitchen ceramic tiles, the stone floor tiles in the bathroom is also to choose the better skid resistance, but in the dimension is 300*300mm, 300*450mm mainly, if the bathroom area can choose slightly larger, too many gap bathroom floor tiles are not clean.

I have seen many news about the collapse of balcony, so I suggest that the glazed tiles thickness and weight should be as light as possible. And the color of the balcony outdoor floor tiles is mainly light color, and before the tiles, the balcony ground is also proposed to do waterproof, and the size of the balcony wood tiles is generally 300*300mm.

When choosing small floor tiles, the recycling time is higher and waste is less. Small space will be disharmonious and unbalanced with large size tiles, while large space with small size tiles will appear too many lines and no grade. The choice of tiles size is also associated with the style of tiles, such as the living room rustic tiles are generally 600*600mm floor tiles, and the bedrooms are mostly 150*600mm wood floor tiles, 200*800mm floor tiles, and so on. Considering saving the cost of decoration, cutting tiles as little as possible.

Floor tiles purchasing skills: BARANA teach you how to choose tiles classification

Now there are various types of floor tiles in the building materials market. Polished tiles, glazed tiles, vitrified tiles and microcrystalline stones tiles. These names often make us dizzy and don’t know where to choose. After investigation, it is found that there are many contradictions in the introduction of the characteristics of the same type of tiles even by the shopping guide in the big brand flagship store. I believe that many people also have the same problem.

The porcelain tile is also called the general marble porcelain tiles. It can be said that it is the general name of a kind of flooring tile. All the floor tiles design with water absorption or less than 0.5% belong to tiles price. It is also the most common type of household porcelain floor tile products. The surface of the tiles are not the glazed rustic tiles and ceramic polished tiles, and the material and color of the opposite side are the same. The anti skid and wear resistance are all good (the surface is relatively rough, the ordinary scratch is invisible). Most of the “skid resistant tiles” we usually refer to are full body tiles.

The advantages of polished porcelain tiles: the price is generally the bottom, and the surface is hard, wear-resistant and skid resistant. When the surface is stained with oil, it can be scrubbed directly with general detergent and metal wire for easy maintenance. Disadvantages: all tiles floor are easy to absorb dirt and scratches. After a long period of use, the surface will be black, yellowed and tarnished, and it will easily become old. It is suitable for balcony, terrace, and some open area.

The ceramic tiles are the vitrified tiles that we often hear, it is a kind of marble tiles made of polishing surface of the tiles. It can be understood as the general floor tiles design of the high light plate. As the surface is polished, its skid resistance and wear resistance are slightly inferior to the full body tiles. However, there are also pores on the surface, which are easy to cause discoloration of flooring tiles price, and the color is relatively single, with few choices. Because of the same water absorption on the surface, polishing tiles are not suitable for use in kitchen and bathroom. It is suitable for the living room, the corridor and so on.

Glazed tiles are made of glaze on the surface of all body tiles. Glazes and colors can also be used to make rustic tiles. Compared with vitrified tiles, glazed tiles have the greatest advantage of good resistance to dirt. Because the glaze seals the pores on the surface of the embryo, it is very difficult for the stains to enter. The anti skid performance of the glazed tiles are also very good, and the surface can burn all kinds of pattern patterns, the optional color is a lot of samples. Because the surface is glaze, the wear resistance is slightly worse than the vitrified tiles, and the surface gloss is also inferior to the vitrified tiles. When the product of the embryo is too loose, it is easy to crack when it meets the heat expansion and contraction. The cement sewage below the cement tiles may return to the surface of the wood tiles. Therefore, the glazed tiles should try to buy the qualified product of the big brand as far as possible. When selecting tiles, we should pay attention to whether the surface is produced by pinholes, cracks, bends, water spots and so on. Suitable for living room floor, kitchen, bathroom wall.

Glaze is a special kind of formula glaze that can be polished on the glaze tiles. It is applied to the last glaze of the glazed tiles, which combines the advantages of the polished and glazed tiles. The glaze is as smooth and clean as the polished tiles. At the same time, the glaze color, such as glazed tiles, is rich in pattern and can be highly selective. The disadvantage is that it is too smooth, and the security of residence has declined. Because of the complex production process, the price is generally higher than the above tiles. Suitable for large spaces, such as living room, dining room, etc.

The medallion tiles are fired on the basis of glazed tiles. The glaze tiles are more colorful and can be layered. The stereoscopic feeling is very strong. Its properties are similar to those of glazed tiles, but the appearance is more gorgeous. The medallion tiles have higher cost in firing, glaze usage and operator configuration, so the price is more expensive. It is suitable for the whole living room (optional for the local tyrants), the decoration of the porch, the background wall of the TV, and the ornamentation of flowers in space.

To do this well, the tiles in the home will not fall off

Many friends are complaining that the walls of kitchen and bathroom have been greatly reduced in the supermarket environment. More friends at home because of the old home age, the use of life increased, the home tiles price hollowed out. Wall surface ground floor treatment is not clean, water wetness is not enough, the dust on the back of tiles design is not removed, too much water trace before paving will lead to wall tiles and wall adhesion not tight, the use of a period of time will appear loosening and falling.

The water absorption of tiles will directly affect the firmness of the paste. According to the state regulations, the water absorption of glazed tiles is E less than 0.5%, the shrinkage and expansion rate of tile is about 4 x 10-6. When the water absorption rate of bathroom tiles or the cement does not reach the standard, the thermal expansion and shrinkage of the floor tiles will result in the separation and drop if the shrinkage ratio of cheap tiles and cement is not consistent.

During construction, if the cement mortar is too thick or too much water, the rustic tiles will fall. In addition, if the wall tiles design are large size, if the seam is too small, it will easily become warped and cracked after thermal expansion, cold contraction and mutual extrusion. The water absorption of tiles is low. If the porcelain wall tiles are not fully fitted with the cement, they are subjected to large impact force, such as stampede or hard material impact, which can easily cause the separation of tile and cement, and the bottom of the size tiles are empty.

When the paving is applied, if there is a hollowing on the edge of the large tiles, irrigation can be done on the part of the hollowing part to avoid the overall replacement. There are a small number of local empty drum in the style tiles on the wall, such as without affecting the installation of bathroom cabinet, mirror, shower head and water heater. But if the installation and daily life are affected, it is suggested that the ceramic tiles be knocked off and re laid. If 2/3 tiles appear hollowing, they need to be removed and repaved.

If the porcelain tiles which have been laid for a long time are empty, they should be opened in the middle of the wood tiles when they are dismantled, and then smashed slowly to the four sides, so as to avoid damage to the tiles around them. In the course of construction, large size tiles are encountered, before the paving, we need to do sample pieces, test the bond strength, prevent blind construction to cause large area empty drum or fall off.

The choice of the decoration in summer and autumn, it is suggested to avoid the use of early strength cement, because the cement has higher compressive strength than the ordinary type 10~24%. It will soon dry off after mixing and is very unfavorable to construction. For some complex walls, such as the surface which is too smooth or coated with waterproof layer, the surface of the wall must be batched, drawn, steel wire mesh and so on, so as to ensure the level of the wall.

The role of small tiles in life is very important. Besides visual enjoyment, cleaning is also important. Although it is impossible to avoid falling off, it can still cure the delay and repair. We must take the right medicine, so that we can deal with the problem of shedding correctly and make our home bright every day.

The details that are easy to be neglected in home design must be seen before decoration.

Living rooms, bedroom and long passages require dual control switches. If there are elderly people in the family, they should switch the switch and socket to 1.5 meters away from the ground, so that children can not play with electricity. If necessary, you should outlets for appliances such as water purifiers, kitchen garbage disposers, smart toilet covers. The dining room and the living room ground to install a metal insert, used to insert a hot pot or the small warm stove used in the south in the winter, in peacetime with the ground flat, foot step out to prevent people from tripping over the wire wrestling.

If the room is covered with wooden flooring, you can put 1 square meter tiles behind the door, wear-resistant and clean. Some may lay paving mat, but the floor tiles mat is easy to dirty, so it is not economical in the long run. Live with the old man and prepare a shoe changing stool for them. The old man stooped directly, causing a spinal injury. The porch wants to use the locker, but the space is small, the entrance will be very crowded. In fact, it will be nice to change it into a hat hook.

Without the elderly, the TV in the living room is not necessary to buy, to buy a projector to connect to the set-top box, computer and so on. There will be children later, so that children will not want to watch TV all day. Don’t enlarge the tea table, big sofa and so on. The size must be measured in advance, and more space should be left. Space is not enough, do not buy big chandelier crystal lamp, one is to suppress, two is to live for a long time on the top of the ash several layers, I believe you do not want to rub. Choose wall-haung furniture or edge furniture off the floor. The most important function of the living room is to show and rest, do not store too much, and pile up in a mess. There is no sense of beauty. Save the living room space and prepare a chest of drawers for storage in the corner. Small space and height is not high when the ceiling, and not much practical function, but smaller.

The bedside cupboard is not necessary. It takes up the place, and everything in it is sundry. The newly married couple decorate their houses, and the baby bed must be laid on both sides of the bed. Wardrobe is the top priority. It should consider the structure of the wardrobe according to the composition of its own clothes, for example, the clothes hanging are mostly stacked. Two or more sockets should be designed on each side of the main bedroom head. In addition to charging the electronic equipment, it will also be used for hot milk and disinfector. If you want to set the location of the air-conditioning ahead of time, you’d better not face the bed.

Many small space houses want to make the baby room made of tatami, and it is really beautiful, but the damp place is really unsuitable and easy to mold. Families who are ready to have a second child have switches and sockets on the top or bottom of the bunk bed or two single beds. The whole house, especially the children’s corner design, or a small gadget for collision avoidance, is very cheap. The light should be soft, otherwise children will not have good eyesight. A night lamp should be provided for children’s room. Don’t buy furniture too early. Your baby’s eyesight is incomplete. It’s not suitable to see elements that are too bright.

Most people say that disinfector is not as practical as a dishwasher. Many family sterilizing cabinets will become expensive cupboards. The kitchen socket must be provided with five holes and switches to reduce the electrical appliance. We must make good use of the space of the kitchen wall, save some space with some hardware, such as leachate rack and kitchenware rack. The hardware of the cabinet is very important. Plan the location of kitchen appliances ahead of time, so that the socket can be conveniently reserved. The open small bar is very low.

There is a set of sockets near toilet closets, with a heated toilet lid. Happiness is much higher. Armrest and shower locations should be equipped with handrails to facilitate the use of pregnant women and the elderly. Dry and wet separation is necessary, although it will make the area look smaller. When you clean up, you know its benefits. The bathroom faucet can be drawn with a stretch style, and men at home have shampoo in the morning. Leave enough room for the baby bath. The odorless ground leak, you know its benefits. Using wind heating instead of bathing bullets, the strong lights of bathing bullets will stimulate the vision of the elderly and children, and the warm effect of wind heating will be better. A waterproof cover must be installed in the socket of the bathroom.

How to choose the floor tiles for the house decoration?

The floor tiles, as the main component of the home space, has disturbed the small heart of the owner from the selection of material, the way of cleaning, and the selection of color. The aesthetic and artistic value of it is being recognized and valued by more and more designers and consumers, and flooring tiles art has gradually become a bright color of space art. Its family members are super, such as polished tiles, rustic tiles, glazed tiles, microcrystalline tiles, antiskid tiles, printed tiles, wall tiles, marble tiles, etc.

Vitrified tiles, vitrified polished tiles and polishing tiles are actually the same products in the market. After polishing, the surface of the ceramic polished tiles have fine pores and fine pores, which is easy to absorb pollutants. So the surface of the polished floor tiles are coated with a layer of antifouling agent and filled with fine holes to ensure that it is not easy to be polluted when used. Glazed rustic tile surface has a glaze, actually a layer of glass, no water absorption, no pollution, easy to handle. If you put a glass-ceramic on all glazed surfaces, it is called barite, which is close to the texture of the stone. The brightness is very high, but it is a composite material, and the price is more expensive. It is relative to the buy polished tiles, although the glaze is easy to suck the dirty, but will not be inside the interior, and the bright light is better for the people’s eyes, so it is more quality. Marble tiles price have vivid texture, color and texture of natural marble, and become the best modern tile manufacturing process.

Check whether the color of the tiles is natural, whether the color difference is obvious, whether there are cracks, spots, blowholes and black spots on the surface. Then it is to check the water absorbency. The water droplets on the top are small and the water absorption is low, and the quality is good. The same quality tiles, the heavier the quality, the better, because of the density. One hand lift, one hand percussion, (small floor tiles) metal feeling, (large floor tiles) echo, texture is better.

There are many kinds of wood tiles, including solid wood flooring, reinforced composite flooring, parquet, PVC plastic flooring, and cork flooring. A decorative material made of wood after drying. Back to nature, the wood texture, the appearance of nature, the material environmental protection, expensive and affectation, can not be too wet, can not be insolate, suitable for rich people’s bedroom, living room and study.

Reinforced composite ceramic wood tiles are made from crushed wood and then processed with glue, preservatives and additives. Stability is better, wood content is high, environmental protection also prevents mat to prevent moth. The scope of application is wide, easy to handle, and suitable for home. Solid wood composite wood flooring design is a multi-storey solid wood composite, retaining the original texture, and increase the size of stability, suitable for the pursuit of natural beauty family use. PVC plastic floor is red everywhere in Europe, America and Japan and South Korea. Polyvinyl chloride material is added, and filler, plasticizer, stabilizer, coloring agent and other pressing films are added. The thickness of the oxygen porcelain wood floor is about 4.5 millimeters, and the quality cork can reach 8.9 millimeters. Compared with solid wood tile flooring, cork flooring has better environmental performance and moisture resistance.

insulation. The construction is simple and easy to install. But it is the shortcomings of all the wood of the common, easy to be dampened, go out before you must remember to close doors and windows, not to prevent thieves, but if the rain, rain floats in, your floor is completely destroyed, they will be the highest, who will be the highest competition. General wood marble tiles are processed and polished, with formaldehyde release, shorter life expectancy, wax maintenance.

Guide of small space home decoration

With the rising price of house prices in recent years, small space house has become the object of the popular pursuit. More and more demand is needed. The topic of small space home decoration has become the hot spot of discussion after dinner. How to decorate the small space home, and how to decorate it, with the continuous discussion, the design of the small space home has unlimited possibilities. But really in the decoration of the mind to realize the idea, often is not a simple thing, how to do in the decoration when the expansion of space at the same time, show the effect of the house decoration at the beginning of the expected effect?

Small apartment house in the space planning, if can be in the case of not destroying the weight of the wall, the appropriate space for a little change, according to our personal habit of proper transformation. For example, the dismantling of some partition walls, the use of multi-functional furniture or storage cabinet with storage functions to separate the space, not only retained the original space partition function, but also can not use some of the items to be home, neither affect beauty nor space. We can also use the characteristics of the track type door, to enhance the mobility of the space, the application of the three-dimensional space is also a good choice, full use of the original use of the wall tiles, shelving some often often used small tools.

For small apartment houses, the use of color to create a sense of space magnification is a good choice, when choosing the color, we must choose the color of the uniform color system, too much color will make this is not a big space too crowded. your can choose to use light color relatively bright color tiles, high brightness will improve the sensory ductility, and light color is a bright color diffusion and backlash, can give a fresh, bright and spacious feeling.

Although it is a small space family house, but “sparrows are all small and dirty,” most of them live mainly with young people. So in the installation of the planning circuit, we must fully take into account the needs of various electronic products, electrical appliances switching power supply, in a reasonable range to better. In the bedroom, living room, kitchen and other space to set up more circuit interfaces, do not use in the future when the socket is not enough and embarrassed.

Taking into account the problem of small apartment accommodation, orderly and orderly planning and storage space, so that all articles of life have a fixed position. To make the whole space better permeable. In the decoration layout should be based on people, do not put the cart before the end to accept the main, because the pursuit of space and ignore the comfort of living space, three-dimensional space is a good choice, the use of multi-functional furniture, both beautiful and neat, both its beauty.

When choosing the furniture, we should pay attention to the collocation of the whole space color, and do not use the furniture or ornaments of different colors in different regions in order to highlight the regional sense or achieve some decorative effect. Let the whole color space is too complex, so that the overall space formed a sense of extrusion in the heart, let people feel the space bright feeling, in the choice of furniture to avoid using too many different materials and colors, the guarantee is not out of the space of tone color, soft and bright colors collocation. The use of simple furniture will maximize the use of the overall space.

Now the home life, the owner of the house always use more or less green planting as the ornament, for the whole space to add a lot of color, the characteristics of the plant greening the air inside the house, and proper placement will expand the space in the visual. When choosing green plants, we must choose plants with longer life cycle. After all, we do not have much time to make a decision. It is suggested not to put fragrant flowers with strong fragrance in the living room. Too strong taste can make people feel uncomfortable and even produce adverse reactions. Such as the night fragrant tulip five colored plum and other flowers. It’s best to put some fragrant flowers at random.

For a small house, a good lighting design can not only create a home environment, but also increase the level of space and increase the interest of life. Different lighting will also create different atmospheres. Different lighting will also create different atmospheres. After a long period of continuous summary, the whole in the application of lighting still can follow, such as living room, restaurant, bedroom with the use of warm color lights, according to psychology, the warm color of the romantic light is romantic, the warm color of the light stability does not jump, to ease the fatigue of the rest of the day. The light of the bathroom and the kitchen must be bright, not too soft, the choice of light should be moderate, the bright light is easy to vent in the mood, and it can also keep a positive attitude.

Cautions for tiles on the wall of the kitchen area

For a small space bathroom with poor lighting, it is not suitable for wall tiles with dark colors and warm colors. Because dark walls make people feel smaller and make the room dark. Besides, the walls of warm colors are visually approaching, which will increase the sense of repression in the room. Therefore, this kind of room usually adopts light and coloured kitchen wall tiles. Conversely, for a large area with good lighting, we should consider how to make people feel warm and comfortable when they bathe. Therefore, we can adopt the warm color system and the deep bathroom wall tiles.

As the background of sanitary ware, wall tiles design play a supporting role. Therefore, the brightness and chroma of the color are much lower than that of the sanitary ware. Proper collocation will make cleaning feel cleaner and more beautiful. At the same time, the ceramic wall tiles should be kept in a shade. The color of the general floor tiles is deeper than that of the wood wall tiles. In addition, different patterns should be chosen in different places. The mosaic wall tiles of the bathroom should be pictorial, subtle and elegant. The style of the kitchen wall tile should be simple and lively. It should be coordinated with the style and color of the cabinet and the table. The pattern should be simple and generous, make people feel clean and bright, decorate a few tiles properly, choose the larger color contrast, and create a relaxed and pleasant atmosphere.

The quality requirements of wall tiles are relatively high, and cracks will appear on inferior tiles wall, such as cracks, and so on. The choice of wall tiles price should be based on the surface roughness, perpendicularity and smoothness of wall tiles. Avoid the use of non brand wall tiles. Different wall tiles give people different visual feelings. According to the different environment, suit the local conditions, this is the final requirement of choosing cheap wall tiles. Before pave the tiles should clean the base, such as the wall has lime paste, latex paint, wallpaper and other ornaments, or the ground has dirt, must clean up, or cement mortar and the base adhesion is not firm; In addition, if the wall itself has cracks, it should be properly treated before laying tiles, so that the cracks in the basic structure will become larger in the future, resulting in cracking or falling off of the wall tiles. There are also cement walls to be scuffed. For the ground or wall with too much roughness or verticality, cement mortar should be used for leveling.

The ground facing tiles should be pasted from inside to outside, for example, if there is a slope or a floor drain on the ground, attention should be paid to finding the slope according to the direction of drainage. Wall tiles should be paved from bottom to top. For the sake of beauty, the bottom tiles should be pasted. When the wall tiles are finished, the flooring tiles should be pressed again. When half tiles are encountered, they should be placed below. In addition, one wall can not be attached to the top at a time, so as to prevent the tiles from being more self weight and cause collapse. The porcelain wall tiles have to be fully soaked in front of the paving, which is mainly to absorb water from the pores of the ceramic tiles, so it is not easy to show the phenomenon of empty drum and shedding at the time of paving. If the wall tiles do not soak directly to the wall, cement tiles are likely to directly absorb water in the cement, to a certain extent, the wall tiles will even crack, which will cause a large amount of waste outside wall tiles, and the quality of the paving is not good.

The placement position of the first block of wall tiles for hall is to select the position of the first block of room wall tiles, which determines the placement of the whole stone wall tiles, so the placement of the first block of tiles must be selected. Otherwise, the whole wall will be slanted away. The large wall tiles that cut the wall in the corner of the wall are not very smooth, so it is better to put them in the corner of the wall and seal them with sealant, so it will not affect the decoration effect of the house. On the contrary, if the paving is in a more obvious position, it will affect the beauty of the house.

According to the form of paving, it is necessary to determine the way of laying tiles according to the form of paving. If there is a directional pattern, the product should be paving in the direction of the diagram in order to get the best effect. Special attention, some of the texture is not obvious tiles, micro – powder tiles are in fact also have a direction, the general paving workers will not notice this detail, will make a mess of the wall.