The tile’s placement technique and maintenance method

/in /by

The tile adhesive: also called dry paste method, is a new type of pavement accessories. It changes the wet practice of mortar and cement. The ceramic tiles need not be pre soaked, and the base surface needs no wetting. As long as the basic conditions of the pavement are better, the operation condition can be greatly improved. Its adhesive effect also surpasses the traditional mortar cement, especially suitable for small and medium-sized works and family decoration with small work surface and unsatisfactory working environment.

Multicolor sealant: it is not ordinary coloured cement, it is usually used for ground or wall with slit paving. Its characteristics are strong fixation of color, resistance to pressure and wear, non-alkalinization, non shrinkage, non powdery, not only change the defects of ceramic floor tile slots and sticky defects, but also make the color of the gap and tiles match uniform and coordinated, and complement each other.

The application of these auxiliary materials has greatly improved the construction technology of the overcast angle and yang angle in the pavement. Don’t need for tiles 45 degree trimming, saving labor time and breakage. The cross positioning can improve the seam accuracy of the floor tiles and simplify the construction technology.

A variety of combinations: it is characterized by the choice of geometric size of different tiles, according to a certain combination of groups of pavement. Because the flooring tiles are combined by different sizes and combinations, the geometric lines of the ground change immediately, and changes and vividness are reflected in the order. The ceramic floor tile is made up of many colors. This is the latest trend of the Spanish tile. It is made by random combination of cement tiles with different glaze colors. Its visual effect is different and reverie. This is a challenge to our traditional aesthetic concept of “symmetry and unification”. It is suitable for large auditorium.

Crevice pavement: now the market is popular with rustic tiles, which mainly emphasizes the return of history. The surface of the glaze is uneven, and the straight edge is also corroded. The necessary crevice in the paving is filled with color cement, which makes the whole effect unify and emphasizes the sense of history. Wall pavement: the combination of 45 degrees slanting and vertical paving makes the wall rich and varied from the original monotonous geometric lines, enhancing the three-dimensional and active atmosphere of the space.

Many people see stains on tiles surfaces, they use strong acids to clean stains. As a result, the tile surface is eroded and tarnished. Sometimes stains are still inside the ceramic polish. Many people see stains on marble tiles surfaces, they use strong acids to clean stains. As a result, the tile surface is eroded and tarnished. Sometimes stains are still inside the tiles. Sometimes the stain is cleaned with acid, but it will soon be dirty and easier to seep. The use of acid to remove stains is a quick and effective method, but it is easy to use or not be used by professional people, especially in the polished tiles. Otherwise, it is easy to destroy the gloss of the tiles. If the tiles are dirty, first determine what stains. If the surface of cement or other stains can be removed with weak acid. If it is impermeable to the stains in the inner micropores of the tiles, professional cleaners can be selected. It is important that the gloss of the polished floor tiles can not be damaged, and the high quality antifouling treatment will be done immediately after the cleaning and cleaning, so as to prevent the surface of the tiles from being impermeable.

The tiles surface needs wax, as we all know, but not the all tiles need waxing. Many people think that wax can protect floor tiles better because they lack professional knowledge, but they do not know a mistake in marble floor tile maintenance. Especially for the stone floor polish, it is found that the surface of the tile polish has a stain on the surface of the polished tile, and then the wax is reproduced immediately, and the original wax is not removed, so that the ceramic polish will lose its gloss. When cleaning and protecting vitrified tiles, we must thoroughly clean all the stains on the floor tiles. If there is glue or sticky dirt, wipe with neutral detergent and scouring cloth. For porcelain polish to waxing again, it must be spilled on the surface with water free wax remover. After 10-15 minutes, water is used to wet the ground and remove old wax. After cleaning, follow the normal waxing steps to maintain.

We can see in many decoration experience, after the wall tiles decoration is finished, we need to open windows to speed up air drying. However, it ignores the fact that tiles should also be locked in moisture. When the stone tile is dried, it not only needs moisture, but also more importantly, it must lock the moisture and ensure that the moisture does not drain. After laying the tiles, sprinkle some water on the marble wall tiles that have been laid out everyday, but avoid splashing water. It is best to keep the ground moist, so that it can last for 4-6 days.

Decorate tiles to choose cheapest, the consequence is very serious!

/in /by

Family decoration to buy tiles, need to consider the quality is the basic common sense. But many people in the process of purchasing floor tiles, covet cheap, unwilling to buy quality and reasonable quality ceramic tiles. Many buyer often buy a lot of unqualified tiles because of the cheap, seriously affecting the later decoration. Why is the good floor tile more expensive?

Tiles need dozens of natural raw materials, through dozens of equipment, through dozens of harsh craft manufacturing. The production process of good floor tiles is strict and the cost is high. Tiles need to be inspected to remove glazed tiles, problems such as glaze problems, tiles deformation and defective absorption rate. Good selection criteria for tile are stricter than national standards and need to eliminate unqualified products.

A good tile is not only about product, but also with good service. To choose tiles, we need to consider the decoration style, color matching, hard fitting and soft matching, and paving scheme. In order to satisfy your daily home life, you may also need to paint tile maps and renderings of tiles design, all of which require services. The premise of service is the profit, each company is to survive, the profit can be reduced properly but can not disappear, you take the guarantee of the survival of all the profits, the quality of the product, the after-sales service to whom to guarantee?

Most of the tiles are too cheap. This tiles also have quality problems. The glaze has bubbles and pinholes, It will affect the beauty of the whole home decoration. The polished tiles with too high water absorption have poor resistance to dirt and are easy to blacken over a long time. The glazed ceramic tiles with too light weight are easy to crush when they are thin, It’s easy to crush on the ground. The main types of cheapest tiles: There are various defects in the first grade and qualified tiles of the normal sales tiles. The inventory of tiles that have been eliminated, the tiles price themselves are not sold well, and the colors are obsolete. There is no guarantee for the quality of the debt tile and the punching tile. Failure tile (factory closures, inventory clearance), there is no after-sales guarantee.

The cheapest tiles do not have after-sale and quality assurance, do not provide door-to-door housing, after-sale quality assurance, will lead to several problems: You bought tiles to go back and found that there were many tiles. Sometimes you bought more tiles to go back and found that it can not be let it back to suppler. If the tile is bought less, it is found that there is no original tile. The marble tiles were broken and rotten, and the store did not charge you much money, not to mention you, not to mention compensation. Many times you sold cheap tiles and found that after waiting for a long time, the flooring tile was not delivered to the home, only to find that the money was paid, and the shop was gone.

Why do we need to leave gaps when paved tiles?

/in /by

The tiles must be treated with gaps when they are laid. No matter tiles belong to the “seamless tiles” or “round tiles“, they need to leave a gap treatment when they are decorated. The cement mortar of ceramic tile and paste ceramic tile will have heat expansion and shrinkage problem. In the process of temperature or humidity change, the ceramic tile flooring and cement mortar will have some expansion. If there is no gap in the process of paving, it will lead to the drum or crack in the process of the later use.

Although the ceramic floor tiles are now mechanized production, but in the process of product production, there will be a certain size error (the error is too large for the quality of the product). If there is no gap, it is easy to appear the seam when tile paving is unevenness, and affect the beauty after the tile paving.

Tile placement is a very high proficiency in a construction project, the workers in the whole process of paving, it is impossible to complete the placement of each piece of brick when there is no error, the workers’ mood is not good, daytime and night, and other different cases of tiles, the effect will be different, If no gaps are left, it is also difficult to ensure the joints and straightness of ceramic floor, which will affect the aesthetics of tile placement. When the tiles are put into use, it is unavoidable to be replaced because of pipeline maintenance and other reasons. If the gap is laid, the replacement will be more convenient.

In the course of sales, why do many customers refuse to leave gaps, and prefer to leave no gaps? Customers are being erroneous propaganda by other shops or manufacturers. They feel that seamless tiles can leave no gaps and do not know the adverse consequences of seamless paving. “seamless tiles” is different from the “original tiles“, not the real seamless tile. Seamless tiles in the industry is really called “edge tiles.” The word “seamless tiles” is caused by the incorrect publicity of some manufacturers and businesses when the edge tiles come out.

Someone considered that it is more nice not to keep the gap paving. With a gap, it is easy to get dirty, yellowish and moldy in the seams. It is hard to see that it is easier to take care of hygiene by sewing smaller ones. In the process of use, the small tiles will still be stained with dirt, or can’t really feel like no gap, but after the gap, the overall effect is more hierarchical and more stereoscopic. After filling in the gap of different colors, the visual fatigue is better relieved. If the gap is not laid, the crevice is too small. If dirt is found, it will be more difficult to clean.

Others think that the color of the sealant is monotonous and the placement effect is not ideal. The previous sealant used are white cement and poor filler, now the filling material has been greatly improved, now there are sealant, sealant, sealant and other new products, no dirty, easy to yellow, easily mouldy and other problems. The color of the filling material is also rich. Basically it can be coloured with all kinds of floor tiles.

The size of the gap, BARANA suggested to leave 3-6mm, specific to the specifications, color, style and so on to determine the brick, sometimes the designer in order to achieve a special effect, the gap may be left to reach 10mm. Sealant and other cross stitching materials, as well as different specifications of the cross, is the best assistant to paved tiles.

Which material is better for tile and wood tiles?

/in /by

In home decoration, tiles and wooden tiles are two main materials for decoration. But what kind of materials are better? According to the production process, floor tiles can be divided into glazed tiles, full body tiles, polished tiles, vitrified tiles and so on. Different tile, the performance, decorative effect, and the best application space are different. The advantages of ceramic tiles: durable, cheap and beautiful, relative to the floor, the maintenance is simple, and it is not easy to hide dirt. However, the time is long, and it is inevitable that the gap will be blackened, and it will be difficult to repair and replace trouble.

The floor is mainly divided into solid wood flooring tiles, parquet tiles, reinforced composite tiles, cork tiles and bamboo tile flooring. The laying of different types of flooring tile is similar. Advantages of the floor: comfortable foot feel, natural beauty. It is easier to replace than the floor tile. So many people love it, but in maintenance, the wood floor tile is more troublesome, requiring regular wax maintenance. And need to pay attention to cracking prevention, moisture-proof, anti arch and so on. Of course, the price of the wood floor tiles is a little more expensive than the tiles.

Generally,ceramic wood tiles and porcelain tiles have their own advantages and disadvantages in terms of price, performance and management. At the same time, there are many kinds of tiles design, and there are great differences in performance and price. Therefore, when purchasing tiles, we need to consider it according to our actual situation. The following factors can be referred to: If the room is facing the north or the dark hall, then lay the wood tiles. The reason is very simple. When there was little light and cold tiles, the room was not cold.

If there is an old man or a baby, the living room needs lay out with wood tiles design, because the tiles are much harder than the wood flooring. If the baby in the family is learning to walk, except for the feet of the table to be protected, The gray floor tile is better to choose a slightly softer wood tiles bathroom. The second home decoration period is after 3 – 5 years, If you want to change the grade or style of ground materials because of visual fatigue, the difference between them will be more significant. The replacement of best floor tiles are very difficult, almost equal to large scale construction. It’s easy to change the buy wood tiles. If you want to take away the floor tiles when you move, use a very comfortable tiles, and take it to your new home.

If you are a working member, use the wood ceramic tiles. Because most of the public office only tiles are made of porcelain tiles. After working for eight hours in the cement city. Why don’t you come back to home for a little change. Lay the wood print tiles on the floor to experience the natural feeling? If you often go to the countryside or live in the countryside, then tile is a good choice.

If you like to walk on bare feet, then you should lay the wood tiles cost. It is not only the reason why the feet are too cold on the tiles to cause diseases. but also the moist floor tiles can bring comfortable foot feeling. If you usually wear slippers, especially those with thick bottom cotton slippers, it doesn’t matter what you want lay out on floor.

The more expensive the tile is, the better it is. Don’t talk about that! There are many ways to choose tiles with good look and money save

/in /by

Floor tiles are rich in patterns and cost less than ture wood flooring. But compared with 600*600mm tiles or 800*800mm, the tradition and ice cold feeling of large size tiles. The living room and bedroom are also recommended for wood flooring tiles. Not only because of his warm texture and the beauty of nature’s natural lines, but also because it allows you to indulge in the warmth of the home. Children run around barefoot, sitting on the carpet in winter, drinking tea and reading in the sun, full of happiness. Solid wood floors feel good, expensive and delicate, and are difficult to handle in damp places. But the lines are beautiful, and they are all pleasing to the eyes. The multi-storey parquet tile is like an economical and applicable man on the floor, with stable temperament and good indicators. It is also convenient to take care of the dampness. Multi storey solid wood tiles flooring will lay damp proof cotton when paving. It can effectively prevent wood floor tiles deformation and expansion.

The choice of kitchen and bathroom tiles is generally bright and clean. The simple tiles such as bread tiles and small square tiles have been very frequent in the home decoration industry in recent years. Belonging to home decoration small net red level, is a tool to create a sense of literature and art. Moreover, the domestic tile price is cheap, that is, it is a little expensive to put up labor costs. Bread tiles and small square tiles have matte, bright, plane, oblique light and so on. The flat dumb light of the small square tiles in the net. It is also a distinctive feature of the small square tiles, with black joint sealant, to create a detailed sense of order. It’s very nice and not out of date. If you use white sealant, you will lose this flavor, and the white will be dirty and sooner or later it will turn black.

When decorating the home space, it is the easiest choice to choose the colorful tiles. The price of the tile is high and the style is varied. But this is only used to embellish home space, Generally used in the bathroon cabinet and counter, shower area, toilet area, etc. As long as you choose well, you can immediately upgrade your home to several grades, and it’s easy to form a style. Create the feeling of “having a great cultural background”. The wall tiles on the back of the cabinet can be saved because they are blocked. They can be paved with small brand special tiles.

Even for bread tiles, replacement and paving method, there is another method of beauty. There is much loss of the material for the tiles of the human type. And the craftsmanship of the workers is high. You see, beauty is the price to pay. Unsettled in simple lines and colors, if you want to highlight one’s own personality, then try some mashup tiles style.

The selection steps of tile design and wood floor tiles design: First, according to the household plan, determine which floor tiles needs to be floored and where to use tiles. Choose ceramic tiles according to the style that you like. At this time, we should look at the design drawings and the market. Many times, the design of the tile in the market is hard to get in the market, and some alternatives should be prepared. According to the size of the building, the size of the tiles, and the specifications of the wooden floor tiles, the size of the lay out is calculated and the quantity of tile is used to avoid wasting. The most important material for family decoration is the heart.

Choose with tile, you just need and I am just professional

/in /by

The selection of tiles is not enough for the laymen, but BARANA is well known in that. Why not give these professional matters to professional BARANA? You only choose to believe in the choice of BARANA, the rest of the hand to us to do, you do not have to worry about, we just reflect the value of our own, why do you not do it?

The appearance of marble tiles include color, pattern, gloss and so on. The quality of the tiles is generally uniform and the design is exquisite and lifelike. There is no obvious broken line, dislocation, etc. When purchasing tiles, we can extract several pieces of inspection from the same package, and compare the defects such as chromatic aberration, distortion and lack of edges and corners.

Using hard objects to lightly attack marble tiles design, the clearer the sound, the higher the degree of porcelain, the better of the tile quality. You can also clip the tiles price on the left thumb, forefinger and middle finger to ease down. Lightly hit the lower part of the tiles with the right index finger. If the voice is clear and pleasant, the quality of the tile design will be better. If the voice is dull and muddy, the quality of tiles is rather poor.

When purchasing cheap marble tiles, you can use a small knife or hard object to gently scrape the bricks to test the hardness and wear resistance. If there are obvious scratches on the tiles surface, the wear resistance is not high. If there is no obvious scratch and smooth as new, it shows that the wear resistance is very good. There is no scratches will be found in future use. Measure the side length, four corners and diagonal of ceramic tile, as well as the smoothness of tiles. The difference between the measured data of four corners of tile should be controlled within 0.5mm. If it exceeds, there will be cracks or uneven phenomena in the process.

The evenness of tile flooring can also be combined with two tiles. Set them up to see if there are gaps between the two tiles sizes. There are obvious gaps, indicating that the evenness of ceramic floor is not very good. In use, you will encounter the phenomenon of kick and bow back. The higher the accuracy of tiles side length, the better the effect after laying. The purchase of high quality tiles is not only easy to construct, but also saves labor hours and accessories.

Water absorb-ability and skidding are also the main points. On the back of the ceramic tile colors, drop the right amount of water to see the speed of water absorption after the water disperses. In general, slow water absorption indicates that the greater the density of tiles, the better quality of tiles. Floor tiles should not absorb water, if the floor tiles absorb water, and can see water stains from the front, indicating poor quality. Wall tiles have a certain water absorption rate, which is difficult to measure with this method. But now the wall tile and floor tiles are all matched, the flooring tile are qualified, and there is no big problem with the marble wall tiles.

 

Skidproof, which is a very important factor in tiles. The surface of the cheap ceramic floor tiles should be cleaned before the test. Because some of the protective wax on the surface of the tiles will affect the accuracy of self-test. Because when tile is in water, it is the easiest to fall. So water is measured on the floor tiles design and must be measured in person. Some tiles will be more slippery if they have water, so they can be considered.

How is difficult for selection tiles and style matching, BARANA teach you in 5 minutes?

/in /by

Choosing tile is not an easy task. There are many kinds and styles. When selecting tiles, we should not only identify the quality of grey tiles, but also match them. When many people buy Tiles price, they run around the market without any clue, feel very helpless about it.

Tile belongs to the decoration main material, is the decoration expense main item. The quality and price of tiles on the market are also uneven. Many people do not know how to distinguish the quality of the ceramic tile sizes. Because of the loss of quality in the tiles, people usually choose to buy first-line brand tiles flooring, and spend more money to make peace. If the budget is relatively small, they will choose to buy tiles which are relatively cheap. Then, how can we choose the best tile when the budget is limited? How to pursue the best price ratio.

tile’s body is a very important index to judge whether ceramic tile shower are good or bad. Turn the tiles over and look at the back. The white clay is pure porcelain and good raw material. The side section of ceramic floor has obvious cross cutting pattern, which is usually made by small factories in production equipment. If we touch with our hands, we can also feel that the tiles are smooth and delicate. The tiles with poor quality has a rough texture on the side of the touch.

The difference between porcelain tiles and ceramic tiles is that the firing time and temperature are different. The difference is water absorption. The water absorption of porcelain floor tiles is very low, and it does not absorb water basically, ceramic floor tiles have obvious water absorption. Semi ceramic tiles design are also called ceramic wall tiles, which are far less dense than all tiles. They are not strong enough to resist pressure and impact. In daily home life, if you accidentally drop something onto the floor, the porcelain will easily be removed from the glaze, once the glazed surface is destroyed, it can not be repaired. If you choose porcelain tiles as wall tiles, remember that when laying tiles: Do not use cement. Make sure you use strong tile adhesive. Because marble porcelain tiles will be peeling off with cement paste, and the tile glue should not be mixed with cement paving, otherwise, the tiles will fall off later.

Floor tiles were first popular in pure color paving, and then developed lace patterns, patterns and dark patterns. With no more space for the pattern tiles, The designer began to work on the Tile’s figure . Some special tiles design always give people a very high and expensive feeling. In fact, there may not be a great difference in the price of tiles, but because of this unique beauty, it is very touching. Compared with the regular square tiles, the six corner tiles can be smart and simple. A large area of pure color paving makes the space simple and luxurious. Help you easily concavity out of the light luxury kitchen and bathroom. If you want to break the low tone of pure color, try random paving. Different color blocks collide with each other, highlighting the artistic sense of the geometric tiles surface.

The smooth flowing water tiles are like the ripples of the lake’s water, full of romanticism, it is suitable for small area home decoration, usually used in kitchen and bathroom wall tiles. The gradual paving method allows this area to transform into waves. If you want to use cheap tiles in large areas, try to choose a pure color style tiles. Or similar colors, tiles with deep shades can create an interesting sense of hierarchy. And the color and texture of the tiles are covered with walls. The whole space has a feeling of slow flow of water waves, especially suitable for bathrooms.

There are many changes in the stitching form of the three-dimensional triangular tiles. You can assemble them in various ways like jigsaw puzzle. Of course, different tile splicing will produce different effects, with subtle changes. Corrugated knitted tiles are suitable for outdoor applications. Under the cooperation of lighting, it can show the light and shadow effect that ordinary tiles cannot form, it’s like letting a building wear a woven coat.

Choose Tile according to this method. One thousand living rooms are paved with one thousand kinds of beauty

/in /by

My friend asked me how to choose the tile in the living room. My requirements are very simple, wear-resistant, skid-proof, easy to take care of, bright space, and also clean and generous, it is best to make the living room have the home warm, more comfortable to use, that’s all. My God, this request is “very simple”, suddenly reminds me of “I only want colorful black”, “really simple.” There are many kinds of ceramic tile, which I do not want to count, wooden tiles, polished tiles, marble tile, glaze tiles, micro-crystalline stone, tiles, cement tiles, rustic tiles, modern rustic tiles, and so on. This is a further subdivision……Stop! Stop to divide it, let me steal a lazy.

How do you choose the living room tiles? First from the selection of tile performance. The living room is a public area, the frequency of use is relatively high, and the tiles abrasion is the primary factor. The full body polished tiles can be selected. Anti skidding is the most important thing in the home life. If the tiles in the home are not skidding and do not dare to walk in big steps every day, should be careful and threaten the health of children and the elderly. Antiskid requirements are relatively high, you can choose antique tiles, antique tile are glazed rustic tiles, excellent skid resistance. Now, when selecting tiles, skid resistance is a standard for testing whether tiles are qualified. Generally, the floor tiles have certain skid resistance.

I was still talking to my family about the robot last night. It must takes time and patience to keep the room clean and tidy. If there is an easy to handle grey tile, why don’t we choose it? You can choose wood tiles, ceramic wood tiles has the wood floor texture and color, good handle, easy to clean is famous.

The contrast tile lay out the space effect, the luxurious atmosphere style: Of course, we need to choose marble tiles. The marble tile texture is natural and delicate, the color and lustre are rich and colorful, with the noble blood of natural stone, use the simple lay out methods, it can be paved with beautiful results. Comfortable and soft style: Modern rustic tiles and polished tiles can create a comfortable and warm effect. Its glossiness is the most comfortable brightness and natural softness of human body.

Contracted style: recommended cement floor tiles, grey space without white monotonous, nor black melancholy, simple and generous, most suitable for modern people’s biochemical concept.
Literary and artistic Romance style: recommending the colorful tiles, The colorful tile is a slow feeling, unique personality, quiet and distant, romantic and charming, There are not only have simple and elegant flower lines, , but also complicated geometric patterns. No matter how dull the space is, the ornament of the colorful floor tiles will always bring you a pleasant surprise.

Some small collocations that need to be used when laying tiles. If you do not want to use the tiles in a monotonous way, add the wave line tiles. The function of beautifying the space by wave line tiles can not be underestimated. It can also play the function of dividing space. Especially with the matching of flower tiles, improve the decoration grade, enrich the space. The corner flower tile is mainly used in conjunction with the octagonal rustic tiles, so that the appearance of the tiles on the floor is more beautiful. And the star anise rustic tiles complement each other to create a perfect classical atmosphere. Skirting tile is mainly used in the corner, one is to protect the wall, the two is to give the wall and the ground an excessive effect, and the color connection is more harmonious.

Now let us talk about the size of the ceramic tiles. When decorating a room less than 40 square meters, 600*600mm tiles should be considered. If 50-60 square meters of family decoration, 600*600mm or 800*800mm tiles are available. If it is decorated in 50-60 square meters, 600*600mm or 800*800mm tiles can be used. In the decoration of 60 square meters above room, you can consider the use of 800*800mm tiles. Of course, this is not absolute. It is just a suitable suggestion. Some people like small corlor tiles lay out in the large living room, and now there are large size tiles, specifications 1200*900mm, or even 2100mm specifications.

Which misconceptions must be avoid when tiling the floor tiles?

/in /by

In the construction of the wall tiles, the pursuit of visual beauty is pursued, but the blind pursuit of beauty and neglect of construction technology are also at a loss. The floor tile from selection to paving is needed to know certain decoration knowledge, so that we can easily create a comfortable and perfect living space. Which misconceptions must be avoid when tiling the tiles?

Seamless floor tile, the smaller the seam, the more beautiful. The seamless floor tiles with small joints hope that the gap is small when they are paved, and the smaller the gap, the better the overall effect. In fact, if the gap is too small, the ability of floor tile to respond to the environment will become worse. Due to the change of temperature, ceramic tiles shower will be broken and the normal service life of subway tiles will be reduced. Therefore, the seamless floor tile sizes is equal to completely seamless, and the thermal barrier of ceramic floor tiles needs to be stitched. The size of seamless floor tiles should be around 1-1.5mm, not less than 1mm. Special effects can also widen the gap to 5mm.

Ignore floor tiles cost product performance. In the construction process, a mistake that is easy to commit is to neglect floor tiles product performance and not to use paving according to regulations. Often appears to save the glazed floor tiles on the ground, and the physical and chemical properties of different tiles are different. For example, the water absorption of bathroom wall tiles and the water absorption rate of floor tiles are different. The wall tiles are high and the small floor tiles are low, so their flexural strength is different. In addition, the frost resistance of interior wall tiles and exterior wall tiles design are also different.

The tile adhesive are mixed with cement, mortar and so on. This will completely change the proportion of cement tile adhesive production ingredients, and the quality can not be guaranteed. Put the tile adhesive on the floor and mix it with a shovel. With the help of shovel, the tile adhesive glue can not be evenly distributed, and the effective components of ceramic tile powder will be lost. Similarly, the proportion of manual mixing water is difficult to accurately change the ratio of tile adhesive, so that the sticky force of tile adhesive drops.

Decoration is to use tile floor adhesive into the water for a long time, and then continue to use. When the decoration is used, the tile adhesive are used in accordance with the method of using cement, and the mixed tile adhesive are placed in the ground or water for a long time, which can easily lead to the lack of strength, powder and drop bath tile. The use time is too long, then add water and tile adhesive to mix with it. Some decoration will use the grey tile adhesive last night, in the second day in the morning to add water and tile adhesive powder for mixed use, in fact, the effective component of the tile adhesive has a chemical reaction, water only changes the operation performance, will lead to the later bond strength is insufficient. The tile adhesive should be used with stirring. The use time should be controlled within 2 hours. After drying, it should be discarded.

Integral wall construction and uneven scraping of tile surface and wall. The corner of wood tile is hollowed, which will lead to brick falling in a long wet environment. The tile adhesive is not evenly scraped, and the tile adhesive is sticky and incomplete. The tile adhesive suitable for thin layer construction, according to the smoothness of the base and the size of the tile adhesive to choose a suitable tooth shape scraper, when sticking, we should knead pressure in place, and check the full pulp rate at random. The floor tiles are kneaded on the base surface and the parallelism of the flooring tiles is adjusted, so as to ensure the parallelism of the tiles, the plastic cross is recommended.

The tile adhesive one time scraping area is too large. In outdoor dry and windy weather, the tile adhesive batching area is too large for construction. Use the toothed scraper to scrape the mucilage evenly on the working surface. For each construction period of about 1 square meters, the outdoor dry climate should wet the wall in advance.

The wall is not strong, sand, oil or dirt is too big. No tiles designare pasted without leveling. Because of low strength and oil pollution, the adhesive force of floor tile designs will be directly affected. The wall is not strong, and the base surface is easy to fall off. The wall is not smooth, the defect is too large, and the contact between tiles and wall is not in place, which is easy to cause hollowing.

What should we pay attention to the floor tiles use on the wall?

/in /by

Floor tiles are laid on the ground, but there are many people who are buying, or for a one-time purchase, and always like to lay the flooring tiles on the wall, but this is very good, many people are not clear. If it is not designed under such a loading, usually the effect of collocation is relatively old-fashioned, so, what do you need to pay attention to on the decoration of marble floor tile upper wall?

With respect to color and texture, it is suggested to choose a simple and durable color, such as the elegant grey, the Jazz white, which is more in line with the aesthetic eye of the modern people, and the strong color floor tile is not recommended. For the common modern and simple style floor tiles on the wall, personal comparison suggests choosing larger floor tiles, so that there won’t be so many cracks. In some American and Mediterranean styles, some similar mosaic tiles effects will also be chosen, so the final match should be based on specific combinations.

The larger size floor tiles, and the larger size of the floor tile weight is relatively large, the direct spread of the wall, when the interior of the floor tile design is easy to fall off, forming a safety hazard. Use metal glue to attach metal sheet to the back of ceramic floor tile and reinforce it with steel nails on the wall. Or it can also be constructed by dry hanging, which is much more safer. When the tiles price splicing, the gap is inevitable, the gap is too big to look ugly, the gap is small and afraid of heat expansion and broken edge, usually wall tiles left and right in the 1-1.5, the construction attention to the plane, do not have high and low.

The floor tile suppliers upper wall is the popular paving method now, especially since the house or villa is built, so that it can decorate the atmosphere, beautiful, and some grades. marble Wall tiles and gray floor tiles are also different in paving methods. Because the wall tile has a high moisture content, so it should be fully watered before sticking, soak for more than 2 hours before construction, so as to avoid the moisture of the mortar is quickly absorbed by the dry base and floor tile colors quickly condensing, thus affecting the fastness of its bond.

The tiles will absorb moisture from cement, so that cement can not play the role of paste. In addition, different brands of wall floor tiles have different water absorption, which depends on the experience of construction personnel. The tiles design on the floor are difficult to lay up, and the corresponding labor costs are high, and the cost of the decoration is increased, especially in the large area of the floor tiles.

The kitchen wall tiles are the same as the floor tiles, which are coherent, uniform and uniform in color and texture, bringing the feeling of simplicity. But the high-end hotel or middle and big home space, the same love to use the use of wall climbing this product application, but the tiles are mostly marble tiles, full body polished glaze tiles, these big size wall tiles, generally do not use supporting products, processing and cutting after the use of on the wall, more extravagant style.

The whole living room is unanimously used in dark grey floor tiles, and it is put on the same place. It gives a feeling of steady and heavy weight, and is in sharp contrast to the color of other regions, and it also plays the role of zoning. The bathroom wall tiles and the floor tile of the unified color style, especially the use of marble tiles on the wall, the use of marble texture changes and nature, make the bathroom effect a whole.

The floor tiles and the outdoor wall tiles are relatively different in color or shape. The paved paste is rich and varied, and the effect is more three-dimensional. The overall choice of wood tiles, color and paving shape are different, random, visual is not monotonous, the atmosphere of the whole space. The cheap floor tiles parquet is already very exquisite, plus the neat lines of the wall tiles price, it brings a strong sense of three-dimensional and artistic effect to the space.