Tag Archive for: Tile cleaning

How Cleaning Grout?

/in /by

Use 1 part bleach to 10 parts water on white grout. Whiten discolored white grout by mixing a solution of 1 part bleach to 10 parts water. Scrub grout with the solution and thoroughly wipe all bleach off with a water dampened sponge. Dry the area completely by wiping with a clean cloth and directing a fan on it.

Disinfect tiles grout with a vinegar and water solution. Mix a cleaning solution of one part water to one part white vinegar to clean tiles grout. Dip a scrub brush in the cleaner, scrub for about 30 seconds and rinse all vinegar off your stone with a water dampened sponge. Repeat with vinegar solution and water, until your grout is clean as a whistle. Dry the area with a clean, soft cloth.

Dissolve tile grease with acetone. Cooking grease, milk spills and makeup splatters don’t stand a chance against acetone. Dip a cotton ball in a small amount of acetone and lightly dab any oil-based stains. Immediately flush the area with water from a dampened sponge.

Wash water-based stains on tiles with hydrogen peroxide and ammonia. Get rid of stubborn stains from coffee, tea or pet urine with hydrogen peroxide and ammonia. Rub a small amount of 12% hydrogen peroxide and a drop of ammonia on stains with a soft cloth or sponge. Rinse the area immediately with a water dampened sponge.

Use a poultice on resistant stains. Stains that do not want to disappear with regular cleaning and stain removal techniques require the use of a poultice. Make a paste out of cleaner and a powder, like talc, powdered chalk or dry kaolin clay. Spread the mixture over stains a 1⁄4 to 1⁄2 inch (0.64 to 1.27 cm) thick, cover with plastic wrap, and let it sit for 24 to 48 hours. Mix a 1⁄2 cup (120 mL) baking soda with 1 tablespoon (15 mL) water for oil stains. Mix a 1⁄2 cup (120 mL) talc with 1 tablespoon (15 mL) acetone for water-based stains.

How to Remove Floor Tile?

/in /by

Whether you’re doing a complete renovation or just need to replace a single tile, removing floor tiles is a relatively easy task to do yourself. If you have a smaller project, you can take out your tiles by hand. For larger projects, consider renting an electric chisel hammer to finish the job quickly. Once you remove all of your ceramic and its adhesive, you’ll have a clear and clean surface to start fresh!

Removing tile from your floor can be done with a few tools and dedicated time. By positioning a chisel under a tile, you’ll be able to loosen each one and remove the floor. Taking your time with this project will ensure you finish with a beautiful, tile-free floor. Don’t forget to wear leather gloves, a dust mask, protective glasses, and clothing that covers your arms and legs to prevent injuries.

Remove the grout around the floor tile with a grout saw. Grout saws resemble utility knives and are used to remove grout surrounding tiles. Hold your grout saw firmly in your dominant hand and work around the tile you want to remove. Use long strokes as you apply firm pressure to cut into the grout so the tile comes up easier. Grout saws can be purchased at any hardware or home improvement store.

Hit the tile with a hammer to loosen it. Set the hammerhead directly in the center of the tile. Lift the hammer up and bring it back down in the middle of the tile with a firm amount of pressure. This helps loosen the tile more and break apart some of the adhesive on the bottom. For larger tiles, use a 3–5 lb (1.4–2.3 kg) sledgehammer.

How Using a Hammer Chisel Remove Ceramic Tile?

/in /by

Rent a hammer chisel. A hammer chisel is an electric machine similar to a jackhammer. Many home improvement stores offer a day-to-day rental service so you don’t have to buy your own, so call a few stores and see what their daily rates are.

Some hammer chisels are handheld so they can be used on walls or floors, while others are larger and made just for floors. Pick the right hammer chisel for your job. Hammer chisel rentals usually cost around $50-$60 USD per day.

Put on safety glasses and earplugs before you start working. Since hammer chisels break apart your tiles and could send shards into the air, wear safety glasses to protect your eyes. Hammer chisels also make a lot of noise, so wear earplugs to prevent damage to your hearing. If you have a large project, wear a face mask as well to prevent dust inhalation.

Hold the end of the chisel against the edge of your ceramic tiles. Start on the outer edge of your room or wall. Hold both of the chisel’s handles so you have the most control. Set the blade of the hammer chisel against the bottom of the tile at a 30 or 45-degree angle.

Turn on the hammer chisel to break apart your ceramic tiles. Pull the trigger on the handle of your hammer chisel and push it underneath your tiles. The hammer chisel will chip away the ceramic as well as the adhesive underneath. Continue breaking your tiles until you’ve removed them all. Clear your work surface occasionally so your broken tiles don’t pile up.

How Removing Stains?

/in /by

Use bleach, hydrogen peroxide, or rubbing alcohol on blood stains. Blood stains can be removed by dipping a dishcloth or sponge into a solution with ratio 1:49 bleach to water. For instance, concoct a mixture of 2 teaspoons (9.9 ml) bleach and 1⁄2 US quart (0.47 L) of water. Alternately, dampen a dishcloth or sponge with hydrogen peroxide. Dab the stain lightly until it is gone. Using rubbing alcohol will also disinfect your stains.

Eliminate organic growth using bleach. To rid your ceramic tile of mold or mildew, mix a solution of ratio 1:49 bleach to water. For instance, use 2 teaspoons (9.9 ml) of bleach and 1⁄2 US quart (0.47 L)) of water.

Remove coffee, tea, or juice stains with chemical cleaners. Wash the ceramic tile with dish soap and hot water. Remove the leftover discoloration with either a solution of 2 teaspoons (9.9 ml) of bleach and 1 US quart (0.95 L) of water, or with hydrogen peroxide.

Use ice on gum, tar, or wax stains. Place some ice cubes in a resealable plastic bag. Place the bag over the sticky stain marring your ceramic tile. After five to ten minutes, check the consistency of the stain. It should be frozen. Scrape away as much as possible, and wipe the rest off with paint thinner.

Use club soda on grease stains. If you’re trying to remove a stain of oil or grease, wet a dish rag with club soda. Rub the stain using a gentle circular motion. If you don’t have club soda, you could simply use a nonabrasive floor cleaner.

Use bleach on ink. Ink or dye stains require treatment with bleach. Soak a clean dishcloth with bleach. Lay the cloth over the stain. Check it every 60 seconds or so until the stain disappears. Don’t leave the bleach-soaked cloth on the ceramic tile too long. The alkali in the bleach can cause whitish water-soluble salts to collect on the marble tile.