Posts

How Doing General Cleaning on Interior Surfaces?

/in /by


Sweep all loose dirt and debris off of the surface. If you have a sandstone tiles hearth or sandstone tiles on your floor, sweep them off before doing a deep clean. With will get rid of loose debris on the surface and will make cleaning easier. If your interior sandstone tiles surfaces are not on the floor, such as if you have a sandstone tiles counter top, use a dry towel or a small, hand-held brush to wipe all crumbs, dust, and other debris off of them.


You can also use a vacuum to get rid of all loose dirt and debris on the surface. Wipe down the surface with a damp cloth. Use a clean, soft rag to wipe down your sandstone tiles. Simply get the rag wet, ring it out in the sink, and then wipe the entire surface of the stone.


If you are dealing with a sandstone tiles floor surface and you don’t want to get on your hands and knees, you can use a microfiber mop head or other soft floor cleaning mop. Rinse out the rag if it gets very dirty and then continue on until the entire surface has been cleaned.


Tip: When you are wiping down the surface, notice whether the water appears to absorb into the sandstone tiles or if it beads up on top. If it absorbs into the stone, that means the stone has no sealant. If it beads up, the stone has been sealed. sandstone tiles that is not sealed is more prone to staining, so it needs to be used more carefully.


Don’t use your general household cleaning products on your sandstone tiles. Unless a general cleaning product, such as a “kitchen surface cleaner,” is labeled for cleaning natural stones, you shouldn’t put it on your sandstone tiles. In particular, acid-based cleaning products, such as those that contain citrus or vinegar can damage the surface.

How Eliminating Heavy Stains?

/in /by


Treat dark colored stains with hydrogen peroxide. Soak a clean, soft rag with hydrogen peroxide. Wring excess peroxide out of the rag over your sink. Position the rag so its peroxide dampened parts directly touch and cover the stain. Keep the rag on the stain for several hours or overnight. Avoid using this technique if your marble tiles is dark colored. Hydrogen peroxide on dark colors can lead to lightening.


Less serious stains may only need 15 minutes to a half hour of time before the stain can be wiped away. Check less serious stains at regular intervals for this reason. If, at a glance, you can tell the stain you are working on will require heavy-duty techniques, you may want to skip the peroxide treatment and move straight to mixing a heavy-duty cleaning solution.


Rinse the treated area with cold water. Fill a cup or small bucket with cold water. Pour water onto the treated area of the marble tiles. Use a clean, dry, soft cloth to wipe up standing water and any dirtiness. Heavy-duty stains may remain after cleaning the surface with peroxide, in which case you’ll need to mix a heavy-duty cleaning solution.


Mix a heavy-duty cleaning solution for remaining stains. In a medium sized bucket, combine ¼ cup (59 ml) baking soda, ¼ cup vinegar, ½ cup (118 ml) ammonia, and 8 cups (1.9 L) of hot water. Agitate the mixture with a kitchen implement, like a spoon, until the ingredients are consistently blended. The mixture will foam slightly.


As an alternative to heavy-duty cleaners, you can use paint-thinner or denatured alcohol to remove the stain. However, always test these cleaners in an inconspicuous place on your cultured marble tiles first, as they may damage the surface. Although this cleaning solution is made with household products, it can be harsh on your skin. Wear gloves when using this solution to prevent dry skin and irritation.

How to Clean Walls with Vinegar?

/in /by

Household cleaners can be both expensive and toxic, causing many people to search for alternative approaches. Vinegar is a great all-purpose cleaner and can also be used to effectively clean walls. You can create a simple cleaning solution with vinegar and water. Even though it’s a natural solution, be sure to perform a spot-test before proceeding. Also be sure to use a white sponge and cloth to avoid the sponge color bleeding onto the wall.

Protect your floors. Lay a dropcloth or towels along the baseboard where you intend to start. Ideally, your sponges shouldn’t be dripping wet when you use them, so feel free to skip that part if you’re confident in your ability to catch the occasional drip that may run down the wall. However: Do keep some towels around just in case your bucket suffers a major spill. Play it extra safe and lay one out to set your bucket on while you work.

Ventilate the room if needed. Depending on how strong your solution is, you may find the smell of vinegar a little overwhelming. If so, open windows and/or set up some fans to improve air circulation. Vinegar fumes aren’t dangerous, but they may tempt you to rush through the job. Avoid doing so, since a rushed job may lead to drips and other water marks that will remain visible after the walls have dried.

Prevent electric shock. Unplug power cords from outlets. If you intend on cleaning outlet covers and/or where they cover the wall, switch off the fuses for those outlets before doing so. Do the same for light switches, telephone cords, and any other fixtures with an electric current.

Remove decor. If you’re cleaning the entire wall as opposed to spot-cleaning, take down anything that’s mounted to them. Ensure a thorough cleaning without any obstructions that might be hiding dirt. This can include any: Photos, posters, or other artwork. Shelves, coat hooks, or other functional items. Electronics, like wall-mounted TVs or speakers.

How Choosing Pool Tile Online or In-Store?

/in /by

Look for tile online for inspiration. Look online for images of pools that you like and find out what kind of tile they’re finished with. Browse through websites for pool tile companies and see what different kind of tile they offer. Read online reviews to find good-quality tile. See what other homeowners are saying about particular kinds of pool tile and different tile businesses.

Take notes as you do your research. Use your notes to narrow down a few types of good-quality tile and some good places to buy them.Look at tile in a store to see what you like. Pay attention to the overall quality and feel of the different tiles. Do you prefer tile that is smooth or abrasive?

Hold up different tiles and see if you like how the light reflects off of them. Hold different tiles side by side to see if you like them together. Shop for slip-resistant tile for kids. Finish any edges or walkways around your pool with slip-resistant tile to prevent kids from falling and hurting themselves.

Trim end tiles to fit around household fixtures. It may also be necessary to cut tiles when they run up against door jambs, cabinet bases, air vents, fireplaces, and similar obstacles. To do this, record the length and width of the object protruding into the tile space, then mark those measurements on the tile using a straight edge.

Use a wooden shim or scrap piece of cardboard to account for the grout lines in your measurements. Make sure the lines you draw on your tiles are plainly visible. They’ll serve as a guide when it comes time to do your cutting.

How Choosing Pool Tile by Material?

/in /by

Use porcelain if you’re on a budget. Porcelain tile is the cheapest and most common tile finishing option for pools. Create a beautiful mosaic or pattern using porcelain tile to enhance your pool design. Finish with stone for a natural look. Stone pool tile blends nicely with surrounding landscaping, and it’s great for young children because of its slip-resistant properties.

Use stone tile made from a beautiful type of stone like sandstone, limestone, or granite to create a smooth, sophisticated finish. Go with glass for a luxurious touch. Create a glass tile finish that shimmers and dazzles pool-goers with its reflective properties. Keep in mind that glass tile is more expensive than stone and porcelain tile.

If the tiles are more than 1 or 2 inches (2.5 or 5.1 cm) across, you may be able to cut them with a score-and-snap tile cutter. Press the cut tiles into place. Make sure that you keep the grouting gaps between the tiles consistent so that they match up with the grouting gaps on the tiles that are already on the wall.

This line will intersect the first line, indicating the exact center of the room. When tiling adjoining rooms, draw your lines so that they run from 1 room to the next. Make sure the line is positioned in the center of both rooms. Use the “3-4-5” method to find the center of irregularly-shaped rooms. Measure and mark 4 feet (1.2 m) outward from the center of the line you drew from the longest wall. Then, make a second mark 3 feet (0.91 m) down along the center of the wall line.

Stretch your tape measure between the 3 ft (0.91 m) mark and the 4 ft (1.2 m) mark. The distance between the 2 marks should be exactly 5 ft (1.5 m). Make a final mark where the tape measure crosses the 4 ft (1.2 m) mark to pinpoint the room’s center.

This method is useful for establishing a starting point in rooms with odd dimensions.

Refuse To Dazzle, Designers Teach You How To Choose Tiles.

/in /by

For the relatively small space, and the poor light collection of the bathroom, in the wall tiles above, it is not appropriate to choose dark ceramic tile. Dark tiles make the entire bathroom space dark. In order to better reflect the toilet color, you can generally use light colored tiles, the sun can also reflect the sun very well during the day. You can also use bright colors, patterns, selection of imitation jade or marble, at the same time to reflect the simple and lively effect.

For good lighting toilets, you can use bright colored dark tile. Some people think that the color of the ground with a visual contraction features, will make the original little space seems to be more narrow. In fact, not necessarily, as long as the material is bright tile surface, there will not be such a problem.

At present, antique brick is more popular, they are semi matte or matte material, some surface is a small box, for the bathroom is not only beautiful but also practical, can slip.

How To Reduce The Loss Of Tiling?

/in /by

First, buy products

There will be many inferior tiles, color deviation is not square in the paving process prone to loss problem. So consumers should try to pick a brand in the market, the purchase of qualified products, but also to ensure customer service, to determine whether a good negotiation can fill, return, replacement, the claim process, once the processing is also more convenient.

Two, accurate measurement of area

Area, paving pattern and loss of the housing, so the number of tiles need to estimate according to these conditions, consumers in the purchase of ceramic tile prior to space size measurement accuracy, to be aware of how much to buy tiles. The smaller the room, the greater the loss, so the size of tiles should also be taken into account, such as ordinary 10-30 square meters of room, generally choose 600*600 mm specifications following tiles, specifications too much more damage.


Three, careful selection of workers

Paving process, the owner good overall supervision, to prevent workers at random cutting tiles or unreasonable use. Skilled workers employ skilled workers, and the technical proficiency of the workers will affect the tiling loss. Skilled workers will also provide owners with cost-effective solutions. Therefore, careful selection of workers is also an important part of reducing consumption.

Welcome To Barana international Ltd.

/in /by

The important function of household is wei yu space. Want to make the bathroom is full of strong sense of design, need to pay attention to skills like makeup. Use hexagon floor tile to create personal characteristics the style of the bathroom. Overall collage, local ornament, or mixed color is tie-in, if colour is applied proper, can change the atmosphere of whole space that defend bath.


In rectangular space that defend bath, the hexagon floor tile color piece collage large area shakedown stick metope and ground, extends the space, make whole space. In a narrow strip, bouncing color piece to create a concise and lively, but creative style. The shop is stuck is not subject to the constraints of conventional brick, provides the combination point on the surface of the line.


Mosaic rich color for the space added a third dimension, with new Mosaic composed perfect combination gray hexagon floor tile, broke the past waist line design and conventional full-page monotonous colors.