Posts

Why cracks appear after the tiles are finished?

/in /by

The wood floor tiles after cutting is cracked. After one years of decoration, after 8 months, it was found that no matter the living room or the bedroom, all the marble floor tiles that had been cut at the corner of the house were radially broken at the cutting point, and were increasingly serious. Strangely enough, the flooring tiles are not loose or tilted.

Cracking of tiles design after cutting is a common phenomenon. Compared with the whole tiles price, the overall strength of the cut wall tiles will be reduced a lot, so it will be easier to crack in the later stage. Although the floor tiles design are finished for a period of time after the cracking, but it is likely to be in the construction, after the completion of the inside has been small cracks, the naked eye can not find.

In the process of paving, the workers use a rubber hammer on both sides of the cement tiles. If the force is not consistent, the adhesion of the wood marble tiles and the ground will not be consistent, and then the tiles are easily cracked with the increase of the cement strength and the increase of the tensile force in the later period. This is a problem which is difficult to find in the construction process, and it will only appear in the process of use.

First, precaution. When pawning construction is done, we urge the workers to be more careful. We must find a reliable small tiles decoration company. second, the choice of good quality brand floor tiles. If the above problems appear, the owner can contact the original decoration company for maintenance, replace the damaged tiles, and please pay more attention to the workers in the reloading.

The tiles are empty of drum. The tiles in the living room has two tiles in the seam. It can feel that the tiles are swinging up and down. There is no improper use of the tiles during the use of the house.It became so imperceptible that stepping on it was very uncomfortable. Such a problem may arise because no wet curing is done after the floor tiles are installed.

Wet curing is done within 24 hours after tiling, like sprinkle water on the floor to keep the tiles moist, usually for a week. When the cement absorbs enough water to reach its due strength, the ground will be in extreme dry condition if no wet curing is carried out. If a basin of water or water pipe is sprinkled in the process, some changes will take place in the floor tiles.

How to do the problem of empty tiles in tiles?

/in /by

In modern home decoration, the application fields of wall and floor tiles are more and more extensive. However, for a variety of reasons, after the use of wall tiles for a period of time, often occur local wood tiles and even fall off, not only affect the use effect, but also to the whole wall and the ground to leave a piece of ugly “scars”.

If the sand pulp is not loose, only the bathroom tiles are shedding, and the mortar that adheres to the back of the kitchen tiles can be scraped, and a little cement is mixed into the 107 glue, and a thin layer is evenly coated on the back of the cement tiles, then the tiles can be pressed together later.

If the sand pulp falls along with the tiles design together, after a slight chisel on the original base, the sand pulp with 107 glue is set up, or the cement, E 44 epoxy resin, acetone, and ethylene diamine chemical shop are mixed with the proportion of 5:3:2:1, and brush a layer on the base surface with the brush, and then the shedding tiles price are pressed up until the sand pulp is hardened.

It should be noted that if tiles are partially shedding, they must not pound the sand on the foundation surface to prevent the original marble tiles from being broken. It is required that the cement slurry binding layer should be evenly brushed and the brushing time can not be too long, so as to prevent the wind from drying and harden, resulting in the separation of the surface layer from the base layer and causing the drums to rise.

Strictly mix the sand mixture according to the ratio, and do not add any water. The mortar must be dry and hard, and the thickness should be controlled at 2-3 centimeters. When paving the flooring tiles, clean the back floating dust, moisten and moisten, and ensure the good bonding. When the floor tiles design are laid, the four corners are pressed with strength to make it contact with the pulp parallel, and the drawing line is 2-3 centimeters high. Then the hammer or the rubber hammer is struck, and the face is leveled with a horizontal ruler. After paving one tile, it will be pasted in two directions. If there is any subsidence phenomenon, the polished tiles should be lifted and paved with mortar.

In home decoration, it is necessary to deal with strong electric (lighting, electrical appliances) and weak lines (television, telephone, audio, network, etc.) buried wires, and wires are very important. Selection of wire specifications: family decoration, according to the national regulations, lighting, switch, socket to use 2.5 square wires, air conditioning to use 4 square wires, water heater to use 6 square wires.

The construction principle of water and electricity is that the top can not walk, the top can not walk, considering the wall, the wall can not walk, only to consider the ground, the line of the top is inside the ceiling or the plaster line, even if there is a fault, the repair is also convenient, and the loss is not great. If all of them are gone, overhaul will guide the floor to lift up. The ground is concrete structure. To bury the pipe, it will damage the concrete layer and even the reinforcement.

What kind of tiles is the good tiles?

/in /by

Tiles design are the building material that every decorated family must use. However, tile is still a product of low attention. It is not easy to distinguish the good or bad decoration owners of tiles price. So, how to choose tiles? How can I buy a good ceramic tiles? This has become a headache for many decoration owners.

Floor tiles are refractory metal oxides and semi metal oxides, and their raw materials are mostly mixed with clay and quartz sand. In fact, there is no absolute unified statement about the quality of floor tiles design. Some people think that flooring tiles can be tested by national quality standards as good marble tiles, and some feel that the porcelain tiles they look like are good marble porcelain tiles.

So, what kind of cement tiles is the good rustic tiles? Look at the back of the glazed tiles, that is, the tiles body. General, good tiles in the burning of the raw material in addition to the raw material, except for the exception, but also with a high magnetic field bar to remove the iron, so removing impurities and iron removal is the key step of the tiles.

Cheaper floor tiles: the back is darker, the color is uneven, and there are uneven black spots because impurities are removed and iron is not removed. Very white and cheap tiles should be wary, because it is possible to add chemical auxiliary materials, zirconium silicate, and high purity zirconium silicate without radioactive and expensive. If ordinary manufacturers add high purity zirconium silicate as raw materials, the price of tiles produced will certainly not be cheap. There are also many manufacturers with cheap or very low purity zirconium silicate as auxiliary materials, low purity zirconium silicate containing monazite, monazite is often radioactive.

Polished floor tiles are made of high temperature, the higher the temperature is, the more intense the chemical reaction and physical change, the higher the density of floor tiles; of course, the density of floor tiles is closely related to the raw material formula except that the temperature is related to the burning temperature. In addition to determining the density of floor tiles, there is a very important property that is the ability to resist pollution. The lower the water absorption, the better the ability to resist pollution. On the other hand, the higher the water absorption capacity of the floor tiles is relatively poor.

The two tiles should be neatly combined face to face and four sides. Then the gap between the two sides should be observed. The length of the two diagonal sides of the tiles are measured with reference material, and the two measurement results are compared to see how much deviation. The effect of Flatness: if the level of tiles are not good, then the tiles will appear unequal after construction, which shows the phenomenon that people walk on the tiles surface.

Test the hardness of floor tiles price, you can use coins on the surface of the tiles slightly with a little bit of strength, if there are obvious scratches, indicating that the hardness of the floor tiles is poor; otherwise, if there is no obvious scratch, the hardness of floor tiles is excellent.

How Should The Living Room Floor Tile Modelling Be Designed?

/in /by

how should the living room floor tile modelling be designed
1, in the market to select tiles, we must consider the Home Furnishing decoration style, now popular style is the new Chinese style, European style, and Mediterranean sun village style, Oriental garden style etc.. Home decoration involves tiles, sanitary ware, lamps and lanterns, curtains, kitchen cabinets, doors and windows, paint and other eight materials and jewelry, style of unity and coordination is extremely important, is to measure the quality of decoration and quality, the main concern. After determining the style, we should pay attention to consider some of their own personalized needs, security is very important.

2, we think everyone should know the wave line, and its role is to make the living room floor more surplus change, some lines overall looks particularly artistic charm. Mainly with some tiles and the main color of the tiles from the processing, the general use of dark tile based processing, and now there are special wave matching antique options.

3, there are a lot of people will give the living room floor tiles for decoration and flex spline in shape, is actually the tile ground decorative painting processing, some high-end brand with lots of patterns to choose from. General should pay attention to the selection, yarn, color and other floral to ground tile color and pattern to be consistent, mainly used in the door or the living room, dining table, the table below.