Posts

How to Clean White marble tiles?

/in /by

marble tiles is a sensitive surface that can easily be marked by spills and spots. If your marble tiles is white, it’ll be especially easy to stain. However, there are steps you can take to maintain your marble tiles’s spotless shine. Beyond this, you’ll need to clean the marble tiles regularly and know how to remove stains if they do happen.


Now, apply a silicone adhesive (or whatever the manufacturer recommends) into the joints. Be sure to fill it completely and give it time to dry—at least a few hours to overnight. Check the manufacturer’s instructions for drying time. Take off the painter’s tape before the sealant dries.


Avoid applying poultice to the same spot more than two or three times. This could permanently damage the marble tiles. Consult a professional if a repeat application of poultice does not remove a stain. If you are not making much progress with plain water, you can use a mild soap to loosen dirt and debris on the surface.


Simply put a small squirt of soap on your scrub brush and continue scrubbing the surface. Use a power washer only if the sandstone tiles is new. If you have a new patio or wall that needs to be cleaned, set your power washer to a low pressure setting and move the nozzle side-to-side as you spray the surface. Holding the sprayer at a 45 degree angle will take dirt and grime off of the surface well.


Power washers can be too strong for sandstone tiles that is old and has delicate designs, like the detailing on old tombstones. Only use a power washer on new sandstone tiles and use a low setting, if possible, as the pressure of the power washer can force water into the stone.

How Ensuring a Safe Cleaning?

/in /by


Avoid harsh cleaners and anything abrasive. Some cleaners may strip your marble tiles of its finish. Check the label of all cleaners to ensure they are suitable for marble tiles. Abrasives in cleaners and abrasive cleaning tools, like scouring pads, steel wool, or scrubbers, can also cause damage to the marble tiles. The surfaces cleaners are intended for should be clearly marked on the label. Abrasives, too, are generally marked on the label.


Test cleaning products on an out of view part of the marble tiles. Even if the label says a cleaning product is suited for marble tiles, it’s always a good idea to test the cleaner first. Choose an out of sight location on the marble tiles, like under a stationary appliance, and use a small amount of cleaner on the marble tiles. If the finish or color is affected by the cleaner after it dries, refrain from using the cleaner.


Soak stubborn stains in bleach. Although bleach is a generally accepted cleaning agent for marble tiles, it’s relatively harsh. Only use bleach sparingly to clean your marble tiles. Same as when using vinegar or hydrogen peroxide, dampen a clean, soft rag with bleach, wring out excess, and drape the rag over stains. Only use this technique for marble tiles that is light in color. Bleach may cause discoloration in dark colored pieces.


Identify engrained stains in your marble tiles. If you’ve cleaned a spot time and again with various cleaners, it’s likely the stain you are attempting to clean is engrained in the marble tiles. To remove spots like this, the marble tiles will have to be buffed and refinished. For the best results, this should only be attempted by a professional.


Apply the cleaning solution with a clean, soft rag. Douse your rag in the heavy-duty cleaning solution. Wring out excess solution over the sink, then lay the saturated rag on the stains. Wait roughly 10 minutes for the stain fighting action of the solution to go to work, then wipe away remaining liquid with a clean, dry, soft rag.

How Cleaning the Buff Floor?

/in /by

Use a broom or dust mop to remove any debris. Start in the corner of the room and slowly sweep the entire room. Make sure you get the floor as clean as possible. Otherwise, you risk buffing dirt into the finish. Over time, buffing a dirty floor can permanently alter the color of your floor finish, turning it a dingy yellow color.


You can also use a vacuum to suck up the dirt you swept. Use a vacuum attachment meant for your type of flooring. Wash the floor with a wet mop to ensure it’s completely clean. For best results, dip the mop into a bucket of soapy warm water. Then, start in the corner of the room and slowly work your way back toward the entrance. As you mop, make short, even strokes to clean the floor.


Rinse your mop when it starts to look dirty. Use a floor cleaner that’s formulated for the type of flooring in your home. Allow the floor to dry for 2 hours or use a fan to dry it faster. Touch the floor to make sure it’s dry before you move on to buffing. Don’t try to buff a wet floor because you will be applying a buffing solution, which is also a liquid.


If the floor is already wet, there will be too much liquid, which will make you need to change your buffing pad more often. Turning on a fan will help you dry the floor more quickly. A ceiling fan or box fan will work best.


The microfiber cloth shouldn’t damage your floor, no matter what material it is. Keep in mind that buffing a floor typically requires a lot of pressure, so you may not see much difference if you don’t press down very hard.

How Preparing the Wax Floor?

/in /by

Determine whether the floor has already been treated. You may want to wax a floor that has already been treated, since these surfaces do wear down and get dirty eventually. First, find out which type of product was used: natural ones called wax, or synthetic ones called finish. If the previous owner is unable to tell you, you’ll need to examine the floor yourself:


If the floor is not shiny or glossy, and you can feel the original material with your finger, it has not been treated. Wipe a small section of the floor with a cloth dipped in mineral spirits or paint thinner. If the cloth turns yellow or brown, your floor has been waxed. If the cloth does not pick up any residue, your floor has been finished.


Choose a wax or finish. If your floor has never been treated, you can select any wax or finish product intended for the material your floor is made from. Polyurethane is a popular, glossy option, but each product will appear slightly different, so do your research and determine which look you want. If your floor has already been treated, you’ll need to choose the correct option:


Wax is difficult to fully remove, since it soaks into the wood. This makes the floor unsuitable for a synthetic finish unless you hire a professional to strip the wax fully, but new wax can be applied without difficulty after stripping, or even simply applied on top if the old layer is only scratched, not dirty.


If the floor has been finished, you can go over it with a floor machine with scrubbing pad attachment to remove part of the finish, then apply that same type of finish to improve the appearance. If you can’t figure out what type it is, or if you want to use a different type, you’ll need to strip the old finish off entirely first.

How to Clean Walls with Vinegar?

/in /by

Household cleaners can be both expensive and toxic, causing many people to search for alternative approaches. Vinegar is a great all-purpose cleaner and can also be used to effectively clean walls. You can create a simple cleaning solution with vinegar and water. Even though it’s a natural solution, be sure to perform a spot-test before proceeding. Also be sure to use a white sponge and cloth to avoid the sponge color bleeding onto the wall.

Protect your floors. Lay a dropcloth or towels along the baseboard where you intend to start. Ideally, your sponges shouldn’t be dripping wet when you use them, so feel free to skip that part if you’re confident in your ability to catch the occasional drip that may run down the wall. However: Do keep some towels around just in case your bucket suffers a major spill. Play it extra safe and lay one out to set your bucket on while you work.

Ventilate the room if needed. Depending on how strong your solution is, you may find the smell of vinegar a little overwhelming. If so, open windows and/or set up some fans to improve air circulation. Vinegar fumes aren’t dangerous, but they may tempt you to rush through the job. Avoid doing so, since a rushed job may lead to drips and other water marks that will remain visible after the walls have dried.

Prevent electric shock. Unplug power cords from outlets. If you intend on cleaning outlet covers and/or where they cover the wall, switch off the fuses for those outlets before doing so. Do the same for light switches, telephone cords, and any other fixtures with an electric current.

Remove decor. If you’re cleaning the entire wall as opposed to spot-cleaning, take down anything that’s mounted to them. Ensure a thorough cleaning without any obstructions that might be hiding dirt. This can include any: Photos, posters, or other artwork. Shelves, coat hooks, or other functional items. Electronics, like wall-mounted TVs or speakers.

How Preventing Injuries and Damages to Remove Floor Tile?

/in /by

Remove items that are on the tile floor. In order to remove the floor tile, move any appliances or other items that are covering the floor. You can place them on a stable counter in the room or in another room entirely. These items might include trash cans, kitchen islands, drying racks, or toilet accessories.

Put on proper safety attire to protect yourself from flying debris. Removing floor tile can cause injuries if you’re not properly protected, so put on leather work gloves, a long-sleeve shirt, and pants to protect your hands, arms, and legs from getting cut. You should also wear protective eyewear and a dust mask.

Knee pads are super useful for protecting your knees while you’re kneeling on the floor tiles. Wear closed-toe shoes to protect your feet while you’re working.

Cover surfaces that you don’t want to get dirty. This includes the bottom of walls, cabinets, and any other surface that’s close to the floor. Dust and pieces of tile will likely fly up while you’re working, so it’s best to cover necessary areas with plastic so that you have less cleanup once your project is finished.

Use painter’s tape to attach the plastic to surfaces. It’s a good idea to cover the tops of surfaces as well if you will likely be laying your materials or tools on the counter.

How to choose bathroom floor tiles?

/in /by

The floor tiles of bathroom is bathed in water almost every day, humidity is very heavy, so when do household decoration, what kind of floor tile design should bathroom use is better? Choose bathroom tiles with low water absorption. High quality tiles deign, low water absorption, so that it can quickly dry. If the marble tiles does not indicate water absorption, you can use water droplets on the back of the tiles price, a few minutes later to observe the diffusion of water droplets, the less water absorption, that is, low water absorption, better quality. The water absorption of wood floor tiles in bathroom is around 1%.

Choose high density tiles. When purchasing bathroom tiles, you can observe from the side whether the tile surface is flat, whether there is uneven thickness of pinholes. Bathroom tiles can be tapped to listen to whether the sound is crisp, the more crisp the sound, indicating that the tiles of high density of texture, better hardness. Such tiles are laid in the bathroom, which are not easy to damage, but also easy to maintain and clean.

Choose dry and wet decoration. That is to say, the separation between shower area and sitting toilet and basin area. Through the different bathroom tiles material and color varieties, to achieve a good division, so that the two do not interfere with each other. Choose light colored tiles. Light colors make the bathroom look more spacious and bright. When choosing, place tiles on the same color and pattern from outside 0.8m. Bathroom tiles choose to pay attention to whether it is marked in line with the state promulgated green health standards and other signs or text, remember not to buy three marble porcelain tiles products.

Choose smaller tiles. The decoration materials for the wall and floor of the toilet are glazed tiles, polishing tiles and mosaic. The specifications for floor tiles are 300*300mm and 330*330mm. Bathroom usually 2 to 4 flat, even if the bathroom area is large, do not use large specifications of floor tiles. Solid floor tiles cutting frequency is too high, waste is greater, inconvenient floor leakage, inconvenient ground leveling, resulting in waste.

Choose glazed tiles with thicker layers. The surface of the tiles can be scratched with hard objects. If there is scratch, it means that the glaze is not enough. When the thin glaze on the tile surface is polished, the wood tiles surface is easy to hide dirt, difficult to clean up, and lack of security. And some unglazed flooring tiles, generally not suitable for laying in a humid and airtight environment, solid cement tiles on the stomatal water vapor and can not diverge, will also lead to the emergence of mold.

How To Maintain Waterproof Floor Tile?

/in /by

1, at home free time, most of the women will be cleaning, for the floor, we usually have to clean up, it is best to regularly clean, select the appropriate cleaning agent for removal. Acid and alkali properties of the cleaning agent can effectively remove ceramic tile surface stains, but because of the acid-base composition of ceramic tile surface may cause corrosion, it is not suitable for frequent use. Should use more ph value for the neutral cleaning agent, daily cleaning can be used household cleaning detergent, soap and other cleaning.

2, on the tile, usually in each crevice, the accumulation of dirt and bacteria are the most, so in cleaning and maintenance, need to be particularly careful. Which is the main raw material and white cement putty, so the dirt adhesion of the above it is difficult to clean, in tile paving completed and daily after cleaning, can be in the crevice of a waterproof agent with brush brush, can play the role of waterproof mildew.

Listen To The Sound To Choose High Quality Tiles

/in /by

What can you do to get on the ground for a dozen hours every day? Super long working time is very testing the quality of floor tile, how to choose quality floor tile has ensured ground to use sex and beautiful degree? Let me tell you.


1.Look at the appearance
Floor tile color, color should be uniform and complete, surface smooth and smooth, no particulate matter raised, ground brick edge rules. Can take a few pieces from a box of floor tile to see whether the defect such as chromatic aberration, deformation, damage.
2.Listen to the voice
The quality of floor tiles can be distinguished by listening to sound. Use hard objects to tap the floor tile, the more the sound is clear and the porcelain degree is higher, the quality is better; The more cloudy the sound, the worse the quality.
3.Drop beads
Drop a few drops of water on the back of the tile to see how fast the water is absorbed. Slow water absorption indicates that the tile density is close and the quality is excellent. Water absorption quickly indicates that the tile density is sparse and the quality is poor.


4.Amount of side length
The edge length accuracy of floor tile is higher, the shop post effect is better. Measuring the length, size and thickness of each tile with a tape measure, the accuracy is high quality, easy to construct, and save time and accessories.
5.Observe the hardness
The better the floor tile is, the longer it will be used. Good hardness, strong toughness, easy to break is the top grade. Use two pieces of broken tile edge to touch each other, see the fragment fracture place leaves is the scratch or the powder can judge ground brick hardness, leave the hardness of the scratch high, scattering powder hardness is low.

There Are Five Problems To Pay Attention To Tile

/in /by

As is known to all, decorate choose ceramic tile is very important, but if you buy a good ceramic tile, post didn’t pay attention to the shop is very damaged engineering of one thing, the small make up today is to teach people, must pay attention to the 5 items in the shop sticks ceramic tile.

1.The ceramic tile should be soaked thoroughly
Ceramic tile are through full immersion in front of the shop is stuck, it is to give the pore to absorb moisture, ceramic tile in the shop is stuck not easy to appear the phenomenon of empty drum, fall off, if not immerse directly to the wall ceramic tile, is likely to be sucked through the moisture in the cement directly to the ceramic tile, reach a certain amount of time, ceramic tile can appear even crack, this will cause a lot of waste ceramic tile, and the quality of the shop is stuck is bad.
2.Choose high-quality cement sand
Ceramic tile should want to have good spread quality, must choose high quality cement sand, such ceramic tile can stick tight solid; The main point of selecting cement is to check whether it has QS certification, and to see if it has a shelf life. If it is past its expiration date, it is better not to choose. Sand had better choose river sand, river sand contain water is bigger, paste effect will be better.


3.Three, cut ceramic tile had better put in the position of corner
Cutting ceramic tile seems always seem to be some uneven, so the location of the best cutting ceramic tile is in the corner, this position at the end can use sealant to seal, does not affect the housing decoration effect. If you put it in a prominent place like a window, it will affect the beauty of the house.
4.The first brick should be selected
The first brick in the seat position to the full range wall ceramic tile, so the location of the first piece of ceramic tile must be chosen, if there is an error in the location of the first piece of ceramic tile, the ceramic tile of the entire wall will be warped.
5.Five, must achieve wall pressure ground
Wall pressure is above the floor tile of wall brick wanted, the advantage is not water, the water will flow down the wall brick in the wall and floor tile surface, easy to clean, because the more troublesome, so some bricklayer’s looking for a variety of reasons not willing to do, this is decorated must supervise bricklayer’s owner, let them do the project well.