Posts

Some knowledge of selection tiles

Look at the appearance: the glazed tiles with good quality should be smooth and delicate, the glaze glazed and bright, and the matte glaze is soft and comfortable. Under the irradiation of sufficient natural light or fluorescent lamp, the tiles should be observed vertically at one meter away, and no obvious glaze defects should be observed. The flower pattern floor tiles with decorative patterns should be delicate and lifelike, without obvious defects such as lack of color, disconnection and dislocation. The quality of tiles on the back shading, trademarks and so on are clear and complete, and there are few glaze marks or defects.

Stitching effect: good tiles size deviation is small, put a batch of products vertically on a plane to see if there is any uneven phenomenon. Look at the flatness, and you can close the edges of the two tile together to see if there are any gaps. Good tiles deformation is small, paved after the btiles surface is smooth and beautiful. Look at the color difference of the tiles, take several tiles blocks together, check carefully under sufficient light, the tiles with different tones, the overall effect after the paving is not good.

Percussion: gently tap the ceramic tiles price, listen to their voices carefully, and the ceramic tiles with better quality are clear and sweet. Poor quality tiles due to improper formulation of raw materials, firing cycle is short, firing temperature is low, knocking will be issued “empty” sound. The weight of tiles price is generally weighed. Generally, the same size tiles has a high water absorption and a good internal quality.

Contrast varieties: flooring tiles are glazed tiles and unglazed tiles according to glaze condition. Glazed floor tiles are mainly used for floor decoration in bathroom and kitchen, and are used in conjunction with interior tiles. Most of the stone floor polish are polished by surface and become polished tiles. Most of the polished tile have less than 0.1% water absorption, also known as vitrified tiles. Polished floor tiles are smooth and mirror like, which are high-grade tile designs.

Tiles edge angle: in paving rustic tiles, many consumers and workers have encountered difficulties in the edge angle difficult to align, which indicates that the flatness of the porcelain tiles may not be too close. When selecting tiles, select a few randomly tiles, look along the border line and diagonal line of the marble tiles. If there is a “warp edge” phenomenon, it shows that the flatness of the tiles are not enough. If there is no, it shows that the flatness of the tiles are basically a pass, which is also a small trick to choose the tiles design.

When choosing the cement tiles, first of all, we should consider the overall style of the interior design, determine the basic color tone of the ceramic, and the feeling after the tiles are decorated so as to coordinate with the overall style of the living room. For example, modern simplicity style, modern simplicity style ceramic polish and vitrified tiles. Vitrified floor tiles and polishing tiles similar, but the production requirements are higher, the press is better, it can suppress the higher density, at the same time the burning temperature is higher, can achieve all porcelain.

Tiles characteristics: the size of the ceramic rustic tiles are uniform, which saves construction time and is neat and beautiful. The lower the water absorption rate, the better the degree of vitrification, the better the physical and chemical properties of the ceramic tile size, the less likely to be cracking or spalling due to the thermal expansion and cold shrinkage of the climate. The tiles with good evenness has no bending surface, no corners and easy construction. After construction, the floor tiles are flat. Strength: high flexural strength, good abrasion resistance, resistance to heavy pressure, easy wear and tear, and durable, suitable for use in public places. The wood tiles are placed on the floor and arranged in a square meter. They are separated from three meters to see whether the colors are different or unable to connect.

The full body tiles are a kind of wear-resistant tiles, although there are varieties, like full body soluble salt, but relatively, the full body tiles not good than glazed rustic tiles. As the interior design is more and more inclined to the color design, the color tiles are becoming more and more fashionable. The tiles are widely used in the floor of the hall, the aisle and the outdoor walkway. Generally, the colors tiles are seldom used on the wall, and most of the antiskid tiles belong to the tiles.

How Does Ceramic Tile Spread Stick Relatively Firm?

How should ceramic tile put up? It might seem simple, but it’s not. Should pay attention to all sorts of the skill of tiling and the use of auxiliary material, ability lets ceramic tile affixed more firmly, the surface is more beautiful. Today come with ceramic mesh to study together, ceramic tile laid how to be more secure.

1.Avoid ceramic tile water absorption rate excessive choose ceramic tile, need key check the water absorption rate of ceramic tile. Drop the water on the back of the tile to see how fast the water will soak. In the same way, the slower the absorption, the greater the density of the tile.
2.Avoid the tiling of the tile on the back of the tile to fit tightly with the wall, and the back of the tile will generally be designed. When the grain is deep, it can ensure that the tile and cement mortar layer will not fall off when it happens.
3.Sand is best chosen for sand and sand, the deployment of the cement mortar strength is higher, but if the strength is too high, can also lead to some bad results, such as using the leveling the ground will be cracking.


4.The base that tiling tile should be handled well to avoid ceramic tile empty drum, the metope of tile shop first, ground floor must deal with clean. Be sure to remove all kinds of dirt on the wall, and mention the water wet
5.When the cement mortar needs to be plump and evenly mixed with the back of the blade of the cement mortar, it should be noted that the cement mortar should be full and even and not cut corners.
6.Set aside 2-5mm expansion joints for tile tiling. If there is not enough expansion joint, under the action of thermal shock expansion or moisture expansion, the stress can occur between adjacent tiles, causing the empty drum to fall off.