How Oiling Your Soapstone tiles Surface?


Wait a full day to treat your Soapstone tiles following installation. After having your Soapstone tiles surface put in, hold off on handling it for at least 24 hours. This will give the adhesives used during the installation process time to finish curing, ensuring that each piece stays remains secure for a good long time.


Putting off cleaning or oiling your Soapstone tiles for a while will also give you time to consider whether you want to oil it at all—some homeowners prefer to let the stone develop its own unique patina organically through regular use. Clean the surface with soap and water.


Before you begin oiling your Soapstone tiles, saturate a soft, clean, lint-free cloth, microfiber towel, or sponge with a mild soapy water solution and use it to go over the entire surface. Then, wring out your cloth, re-wet it with clean water, and wipe the surface again to rinse it. Be sure to soak up any standing water or traces of soap remaining on the surface prior to proceeding.


A quick wipedown will help remove dust and other debris so it doesn’t end up in your initial coat of oil. Drizzle a small amount of mineral oil onto the surface. Use just enough oil to spread a thin coat onto the surface by hand. Pour the oil directly onto the Soapstone tiles—it’s naturally non-porous, so it won’t absorb oil or moisture.


The fact that Soapstone tiles has a solid finish also means you won’t have to worry about it feeling slick or greasy as a result of becoming clogged with oil. of oil for every 1 square foot (0.093 m2) of Soapstone tiles should be plenty.}} Tip: 1 teaspoon (4.9 mL) of oil for every 1 square foot (0.093 m2) of Soapstone tiles should be plenty.