How to distinguish the good and bad of the tiles?

/in /by

Water absorption reflects the density of floor tiles, and indirectly reflects the hardness of tiles, but there is a point need to pay attention, the marble tiles are not be the lowest water absorption the better quality is. When purchasing tiles, we need to pay attention to the smoothness of the tiles design. Poor quality flooring tiles the smoothness will be uneven.

The surface of the bathroom tiles determines whether the effect is smooth, and the straight test of the edge corner of the wall tiles are to see if the kitchen floor tiles are tidy and the size of the gap is consistent. To test the stain resistance on tiles price, we must know that wood tiles will accompany us for a long time.

The tile now have a series of innovations in wear resistance, such as polished tiles, microcrystals tiles, full body glazed tiles, and rustic tiles, which have a qualitative leap. To judge whether the surface is wearable, we only need to pick up the knife or key in the hand and scrape to the surface of the tiles to check if it will scrape the glaze off the surface of the tiles. If such a small description can not be accepted, it can be concluded that this tiles are not a good companion who can accompany us for a long time.

The qualified tiles are usually packed in cartons, and the name of the production plant, the product name, the trademark, the size, the grade, the weight, the color number and the quantity should be printed on the packing box. The national standard stipulates that the surface quality of the superior tiles should be observed at least 95% surfaces at least 0.8 meters without obvious defects. Of course, most of the tiles will be able to reach the standard if they are based on this standard. But we mainly do not look at 95%, but have no obvious defects, from the packing box random checks of several tiles, see the surface of the product has the following defects: ripples, spots, glaze, knock, crack, lack of glaze and so on.

The dust, the debris thoroughly clean, no empty drum, crack and sand and other defects, the smoothness will fundamentally determine the quality of the tiles, good tile workers this step is in place. Before laying the tiles, we need to find the vertical line in advance so that the tiles are uniform and vertical. In addition, the elevation control line should be popped around the wall before the construction, and the cross line is popped out on the ground so as to control the size of the floor tiles.

On the basis of the design requirements of the drawings, the color, texture and surface leveling of the floor tiles are selected strictly, and then the pre paving is required according to the requirements of the drawings. The possible size, color and texture errors in the pre paving are adjusted and exchanged until the best effect is achieved, and a smooth stack is stacked smoothly according to the paving.

The surface of floor tiles should be wetted before paving. The floor tiles are placed on the cement mortar according to the requirements, and the cement floor tiles are tapped with a rubber hammer until the dense and smooth surface reaches the requirements. It is very uniform when the mortar is smeared. It is to prevent the possible cause of the tile empty, and there is a hole and other tools to smooth the post paving of the cement layer.

Why are big sized tiles popular?

/in /by

Floor tiles is a type of tiles with large size. The biggest feature of this kind of floor tiles design is strong surface texture extension, outstanding decorative effect, relatively high requirement for manufacturing process, process and equipment, super high definition inkjet equipment, super tonnage press, super wide body Kiln Roller Road, etc.

After two or three years of market fermentation, big size tiles have also evolved from the junior low grade version to the advanced version. From the bathroom floor tiles, the big plate can only depend on the import to the marble floor tiles, and then to the tiles design board, the production and production of the country are basically realized. According to the relevant data, the covering rate of flooring tiles in the ceramic terminal of the first and second city has reached about 25 to 37.2%, and the first batch of domestic ceramic enterprises to produce floor tiles price is an important force to provide floor tiles for the ceramic terminal.

The surface of the big size floor tiles is more rich in texture. Big size floor tiles are more realistic and more realistic in design and highlight in application and display effects. Big size floor tiles panels provide more diversified solutions for decorative space application scenarios, which can be used for curtain walls, kitchen and bathroom space, home and so on.

Because of the small number of cracks on the big size floor tiles, it is not easy to leave stains, and it is easier to clean up. The big size floor tiles has become a popular trend, but at the present stage, the standard construction of the floor tiles are generally low, and it is not widely used. Such as: product packaging, transportation and paving, and so on, technology has not been able to keep up with it, so it still takes some time to let tiles into large families.

Large size marble tiles have always occupied a part of the floor tiles market with superior quality quality and high cost performance product properties. With the popularity of marble tiles in the market, the texture and color of its products are increasing. As the current interior design is more and more inclined to the color design, the tiles are becoming more and more fashionable. The price of this kind of tiles are very popular, and the scope of application is widely used in the hall, aisle and outdoor walkway and so on. It is generally less used on the wall.

The general tiles are kind of non glazed floor tiles, and the material and color of the front and reverse side are the same. It has good antiskid and wear resistance. The most of the “anti skid tiles” we usually say is the general tiles, and the general tiles are kind of wear-resistant tiles.

Why can’t bought the cheap tiles?

/in /by

Home decoration is a very tedious thing, and the effect of home decoration is more related to the use of housing in daily life. In order to decorate the effect of home decoration, the selection of floor tiles is very important, because tiles are the largest building material used in the whole family assembly link, besides the ornament and decoration of the house, the more important function is to protect the whole surface of the house.

Since the application of the decoration floor tiles design is so important, we should pay great attention to the selection and purchase of marble floor tiles . Especially, we should pay attention to it: too cheap tiles should not be bought, because it is too cheap, there must be problems. Why is it too cheap to have tiles design? So what are the main problems with too cheap floor tiles? Cheap tiles, very poor level. Too cheap tiles, must be the existence of smoothness, the use of these tiled tiles price to decorate the house, housing is difficult to produce the overall effect, with such wood tiles on the ground or wall, often appear uneven phenomenon.

Cheap tiles, easy to infiltrate. Too cheap floor tiles design, the existence of floor tiles surface easy to seep. Because the bulk density and sintering temperature of the floor tiles are not enough, the density of the body and the sintering problem will lead to the low overall vitrification of the floor tiles. Finally, the wood marble tiles appear surface infiltration after being put and applied in the future.

Cheap tiles, there is a serious color difference. Too cheap bathroom tiles, products before the factory, most of the products are not too strict product color classification, or is the product size and color number of various requirements are not strict, so it is easy to appear serious color difference, the use of such cement tiles to the house paving, the overall effect is a disaster.

Cheap tiles, poor wear resistance. Too cheap rustic tiles, the design of the product itself is defective, the budget cost of the product is already discounted, so the surface of too cheap tiles are naturally also not good wear resistance, not to reach the standard. Cheap kitchen tiles, not skidding. Too cheap wall tiles, most of the rough, like such products have no specific product standards, not to mention the antiskid coefficient of consideration, the use of such products for paving, in the elderly or children’s families, that has a huge security risk

Cheap tiles, no guarantee, no service. Too cheap tiles, not only does not guarantee, but also has no service, because similar to these too cheap porcelain tiles products are mostly from irregular manufacturers, similar to irregular and unstructured manufacturers, they are often lack of support and service support this link.

What kind of tiles is the good tiles?

/in /by

Tiles design are the building material that every decorated family must use. However, tile is still a product of low attention. It is not easy to distinguish the good or bad decoration owners of tiles price. So, how to choose tiles? How can I buy a good ceramic tiles? This has become a headache for many decoration owners.

Floor tiles are refractory metal oxides and semi metal oxides, and their raw materials are mostly mixed with clay and quartz sand. In fact, there is no absolute unified statement about the quality of floor tiles design. Some people think that flooring tiles can be tested by national quality standards as good marble tiles, and some feel that the porcelain tiles they look like are good marble porcelain tiles.

So, what kind of cement tiles is the good rustic tiles? Look at the back of the glazed tiles, that is, the tiles body. General, good tiles in the burning of the raw material in addition to the raw material, except for the exception, but also with a high magnetic field bar to remove the iron, so removing impurities and iron removal is the key step of the tiles.

Cheaper floor tiles: the back is darker, the color is uneven, and there are uneven black spots because impurities are removed and iron is not removed. Very white and cheap tiles should be wary, because it is possible to add chemical auxiliary materials, zirconium silicate, and high purity zirconium silicate without radioactive and expensive. If ordinary manufacturers add high purity zirconium silicate as raw materials, the price of tiles produced will certainly not be cheap. There are also many manufacturers with cheap or very low purity zirconium silicate as auxiliary materials, low purity zirconium silicate containing monazite, monazite is often radioactive.

Polished floor tiles are made of high temperature, the higher the temperature is, the more intense the chemical reaction and physical change, the higher the density of floor tiles; of course, the density of floor tiles is closely related to the raw material formula except that the temperature is related to the burning temperature. In addition to determining the density of floor tiles, there is a very important property that is the ability to resist pollution. The lower the water absorption, the better the ability to resist pollution. On the other hand, the higher the water absorption capacity of the floor tiles is relatively poor.

The two tiles should be neatly combined face to face and four sides. Then the gap between the two sides should be observed. The length of the two diagonal sides of the tiles are measured with reference material, and the two measurement results are compared to see how much deviation. The effect of Flatness: if the level of tiles are not good, then the tiles will appear unequal after construction, which shows the phenomenon that people walk on the tiles surface.

Test the hardness of floor tiles price, you can use coins on the surface of the tiles slightly with a little bit of strength, if there are obvious scratches, indicating that the hardness of the floor tiles is poor; otherwise, if there is no obvious scratch, the hardness of floor tiles is excellent.

What is the soft light tiles?

/in /by

Soft polished tiles are kind of tile between Polished and Matt. With the continuous improvement of people’s living standard and the higher demand for material life, many ceramic enterprises will continue to bring forth new products of building tiles. The concept of soft nano polished floor tiles design are also a product that has been touched by many ceramic enterprises in recent two years. Soft nano polished floor tiles are mainly realized by controlling the light fold on the surface of floor tiles. At present, it is a common practice: one is realized by flexible polishing, and the second is through ultra bright.

The principle of soft nano polished tiles is easy to understand. It is achieved by changing the number of grinding heads on the polishing line and changing the number of grinding heads. But the number of modules of the entire polishing line has not changed, and the replacement module has a smaller head number, which is more rough than the surface of the generally full cast grinding head.

Super nano polished tiles believes you will not be unfamiliar to it. Traditional understanding is that it is mainly to solve the problem of flooring tiles surface pollution and enhance the brightness of tile surface. However, with the continuous improvement of super nano polish technology, the super nano polished tiles can not only be well compatible, but also solve the problem of bathroom floor tile antifouling. It can also adjust the surface folding of floor tiles price, and the molecular size of different nano scale super polished tiles is different.

When the surface of the tiles design are covered with different nanoscale, the surface of the tiles will form a different reflective surface. The smaller the nano scale, the higher the reflective rate, the greater the light fold, the higher the brightness of the ceramic tiles surface. The larger the nanometer level, the smaller the reflection rate will be, the smaller the light folding degree, the lower the brightness of tiles price surface, which will form the soft light effect we usually call.

How to identify soft polished tiles effects through soft throwing or super nano polish? It can be identified by touching the surface of the floor tiles. super nano polishing tiles with soft polishing have better texture effect on the surface, and there will be a delicate muscle feeling on the surface of soft polish tiles with hand touching the effect of soft throwing. Relatively, the texture effect is not soft and delicate, but its antifouling performance is the best. Soft light polished floor tile, the expression sense is stronger, its surface gloss is relatively low, after the application, the whole effect is closer to the stone effect, because the surface gloss of the stone is also low. Soft light polished tiles have relatively low surface bending and relatively low refractive index, which can prevent light pollution from happening.

what is the middle tiles?

/in /by

Medium plate, that is medium size. The inner wall tiles refers to a kind of tiles product suitable for laying on the wall. The inner wall tiles of the middle plate refer to the tile products of medium size specially applied to the walls. With the popularization of the large tiles in the whole tiles industry, the tiles have been expanded to a great extent on the ground paving and application. All kinds of large scale tile ground application solutions are also very sufficient, but the production of the inner wall tiles which is focused on the large size tiles is relatively small.

In the tiles industry, which is popular in the tiles market, there is a great market prospect for tiles design products in the middle plate, and it will show the possibility of explosive growth. The wall tiles in the medium plate are vitrified with low water absorption. In the process of ceramic, the tiles are pressed by relatively high tonnage press and burned for a long time. The surface of tiles is rich in texture and excellent in texture. The process expression of the interior wall tiles products on the enamel line and the process of surface printing can be superimposed in a more complex way. The medium plate wall tiles have good seismic strength, and the concrete performance is that the billet is more strong. In the process of production, a more fine ball milling machine is used to grind the ball into the slurry.

The floor tiles size is more standard, the standard of the production process of the inner wall tile is close to the standard of the common full cast or rustic tiles production process, so the error of its later forming size is smaller. The inner wall tile of the middle plate is a kind of floor tiles product with low water absorption. In the construction of the wall, it is suggested to use the strengthened tiles glue for laying on the wall. If you need to pay attention to the paving, please ensure that the base surface of the wall is neat and smooth. We must keep the seam paving during the paving process. The gap between tiles price should be reserved between 1.5mm-3mm. After finished paving tiles, it is recommended that the seams can be treated with beautiful seams, so that the overall effect will be better.

Medium plate wall tiles and traditional porcelain wall tiles water absorption rate is different, middle plate wall tiles are ceramic tiles, water absorption rate is relatively low, mostly under control 1% or double zero standard, and traditional porcelain tiles belong to porcelain tiles design, water absorption rate is generally high, water absorption rate is generally in 8%-12%.

The density of the medium plate wall tiles design and the traditional tiles is different, the tiles flooring billet vitrified in the middle plate is higher, the density is higher, the anti damage strength is high, the traditional porcelain tiles is the pottery body, the high water absorption rate and the low tiles density are the remarkable characteristics of the traditional porcelain tiles. At the same time, the anti breaking strength of the traditional porcelain tiles is also relatively low.

The wear resistance of middle plate wall tiles price and traditional marble porcelain tiles is different. The wear resistance of the inner wall tile surface is higher than that of the traditional porcelain tiles price, because the density of the flooring tiles in the middle plate is high and the water absorption rate is low, but the traditional ceramic tile has low density and high water absorption, which results in the wear resistance of the traditional porcelain tiles design is less than the inner wall tile.

The marble wall tiles in the medium size are different from the traditional wood tiles. The surface effect of the middle size wall tiles is diversified, and the surface can be molded with various kinds of deep and shallow grinding tools. At the same time, the surface can also apply a variety of dry grain effect, and the latter surface can also do various polishing processes to perform process performance, while traditional marble porcelain tiles are not done.

It is best to look at these experiences before you paving tiles

/in /by

In China, wall tiles need to put into the water before they are paving. The floor tiles are placed in the water as paving required. The wall tiles with water soaking affect the two sale. Merchants can not exchange them, which will cause unnecessary waste. Suggestion: The tiles design should be used to combine with the construction progress. Don’t put all tiles into the water at once time.

The bathroom tiles plan is done before the paving. Some construction workers paving tiles when they get it. When paving reaches a certain level, it is found that the proportion is not coordinated, and then it is removed and re paved, resulting in unnecessary wastage. Suggestion: first, make a paving tiles plan before paving. Remind workers to notice the problem of kitchen tiles in time. Do not wait until finish paved cement tiles to find problems, causing the construction side and material side to prevarication. Suggestion: tell the workers clearly before the construction, and notice the quality of the flooring tiles in time, so that the materials and the constructor can be asked to identify the problems in time.

Correct mixing proportion of cement sand. The proportion of cement is large and bathroom floor tiles can be quickly fastened, but the expansion coefficient of cement mortar is large, so it is easy to crack the marble tiles after paving. Suggestion: the mixing ratio of cement sand brick is 1:3, floor tile is 1:2, cement grade is No. 32.5 cement. The wall can not be made of big core board as wall material, and floor tiles design can easily cause arch, fall off and crack.

The porcelain floor tiles are not completely dry, such as immediately pointing to easy to cause tile loose, later will cause bath tiles to fall off, leaving a hidden danger. Suggestion: the joint should be done after the ceramic are dry and solid, generally after 24 hours. Do a good job of protection wood tiles during the paving. Do not scratch or pollute the wall tiles surface. When doing wall paint and paint, do not walk around the tiles without dry tiles, otherwise, they will damage the floor tiles price.

Clean up the wall before the paving shower tiles. In the past, I encountered unclean walls, and I need to clean them again before laying  stone wall tiles on them. Otherwise, it is easy to cause the tiles to fall off. It’s best to wait for the small tiles to go on after it is dry and solid. Floor tiles price are not completely dry, such as immediately pointing to easy to cause ceramic wall tiles loose, later will cause tiles to fall off, leaving a hidden danger.

The seam of floor tile should not be too small. The kitchen floor tile is too small to reduce the service life of tile. The rustic tiles cracked the glaze during the heat expansion and contraction. No matter whether it is a seam wall tiles design or a seamless wood wall tiles, it is necessary to pay attention to the seam during construction. You can buy the current events first, consult the material providers, and leave many gaps between tiles.

Often overlooked 12 small details in paving tiles

/in /by

The tiles paving is stuck is not s small things it looks very simple, there seems to be no big deal in an accident, but if often happens, it will always upset people. As the saying goes, details are very important. in fact, many problems occur because some details are not well done. the marble tiles paving is the same. today, I will share with you some small details that are often overlooked in the tiles paving.

The wall should be handled well

Some walls are cracked or connected to other materials, such as cement walls and wooden boards. Before laying tiles design, the cracks in the wall should be fixed and connected with barbed wire, then reinforced with cement, and finally the tiles price should be laid, so as to avoid cracking of the ceramic wall tiles in the later stage.

Whether small tiles need to soak in water depends on the specific situation. When laying tiles with ordinary cement mortar, some ceramic tiles with relatively high water absorption are what we usually call wall tiles. they need to be soaked in water, and they must be soaked fully. However, some floor tiles with low water absorption, such as polished tiles and marble tiles design, should not soak in water whether they are pasted on the floor or on the wall. There is also a case where if bath tiles are stuck with cheap tiles glue, no matter wall tiles or floor tiles design, there is no need to soak up water.

When you need to soak water, you should also pay attention to the fact that the time for each batch of tiles to soak water is as much as possible, and the water used should be as clean as possible so as not to cause chromatic aberration after the paving is stuck.

Another point is that ceramic that need to be soaked in water should be soaked as much as possible. when they are used, they should be soaked as much as possible in advance, especially when they are spread and pasted on the back. in case there are too many bubbles and they are not used up, they cannot be returned.

Magnesium oxide and magnesium carbonate are white powder with high temperature resistance. in general, the ceramic factory’s kiln bathroom floor tiles reach over 1200 degrees at the highest temperature. at this time, the bottom of the cement tiles embryo is close to melting ( this expression may not be accurate, but the kitchen tiles embryo is soft at this moment ). in order to avoid sticking between the kitchen wall tiles embryo and the kiln’s stick, the characteristics of high temperature resistance of magnesium oxide and magnesium carbonate are used. before the outdoor tiles embryo enters the kiln, a layer of magnesium oxide slurry is brushed on the bottom of the embryo to isolate it. In this way, the sticking of kitchen floor tiles blanks and sticks in high-temperature kilns can be avoided. Therefore, sometimes we will find that there is a lot of powder at the bottom of the billet, and we must find a way to remove this white powder before paving the paving. Otherwise, cement mortar will not stick firmly to tiles, causing hollowing and falling off.

Many people think that it is a waste of time to arrange grey tiles in advance before laying marble tiles price. it is better to lay large marble tiles directly before laying buy marble tiles. In fact, BARANA personally believes that it takes some time to lay the front row tiles, but when arranging small marble tiles, some problems behind can be avoided. for example, when arranging outdoor marble tiles, you can see whether the matching waist line, flower tiles or processed tiles of the batch of tiles are matched with the main tiles. There are also obvious defects on the surface of the main white marble tiles price, whether there is color difference, whether there is large size error, etc. Before arranging tiles, the old pottery also hopes that the owner can take out each tiles to be used and explain in detail the location, quantity and special requirements of the paving paving, so as to avoid mistakes in the paving paving.

Before the paving is stuck, it is necessary to clean up the wall surface. the wall surface that has been blown with putty before needs to be shoveled off again and then pasted with mosaic tiles. otherwise, it is easy to cause hollowing and falling off. If you want to use porcelain tiles glue to lay the paving on the back, then you must level the wall.

When laying tiles with ordinary cement mortar, attention should be paid to the mixing ratio of cement and sand. the wall tiles is 1: 3, the cement floor tiles is 1: 2, and the cement label is No. 32.5 cement. If it is a ceramic floor tiles on the wall, it is suggested to use marble porcelain tiles glue or adhesive as far as possible to lay the paving, so as to avoid hollowing and falling off in the later stage.

I don’t know what the reason is. many people like to mix tiles glue with cement. perhaps it is because polished marble tile glue is more expensive, but they are worried that it won’t stick well with ordinary cement mortar, so they add polished marble tile glue to cement mortar and stir it for use. Many people think that the composition of polished floor tiles adhesive is similar to that of cement, so it is no problem to mix them together. In fact, the polished porcelain tiles adhesive has its own formula, but when it is mixed with cement sand, the various properties of the polishing tiles adhesive are greatly reduced. If the cement mortar can have better water retention and the paving is laid more conveniently, it is recommended to add the tiles glue essence to the cement.

Tiles can’t be perfect in every batch. there will always be problems like this. BARANA suggested that the master should remind the owner or the merchant in time when finding problems in the process of laying the wood tiles. in this way, before the wood marble tiles are laid down, everyone can negotiate and solve them in time instead of waiting for all the cement tiles to be laid down. then speaking of the problems, the builder and the material side will shuffle each other and it will be even more difficult to deal with them. BARANA also suggested that the owner should tell the builder before the construction: if any problems are found during the construction, they should be timely fed back, so that they can be handled in time and many problems can be avoided.

If, in the process of laying glazed tiles, it is occasionally found that small tiles have small problems, for example, if there is a little difference in size and specification and there is a missing corner of a piece, the construction master will try his best to help to select it, and use it as far as possible if the edge corner angle can be cut without affecting the overall effect.

Due to the expansion of heat and contraction of cold, if the white tiles do not leave any seams, the service life of the wall tiles will be affected. at the same time, if there are no seams, the rustic tiles will squeeze each other, causing problems such as glaze cracking, bulging, hollowing and falling off. Therefore, the BARANA suggested to leave a seam for both the tilesd tiles and the ” seamless tiles design” currently called in the market. The paving floor master must communicate with the owner before laying wood tiles price. for more direct viewing, the master can let the owner see how good the seam is when laying tiles before laying tiles.

In the process of paving, it is inevitable to cut and process the corner corners. when paving the corner corners, chamfering and collage are also necessary. when chamfering and edging the corner corners, care should be taken not to damage the glaze surface as far as possible. it is best to let the merchants or owners get the large processing factory to cut it. If you want to be on site in order to make time, it is recommended to use some portable electric cutting machines for processing.

This problem is often overlooked. when pasting tiles, everyone is careful. once the wooden tiles are laid, many people do not pay attention to it. as a result, many people stir cement on the newly laid tiles, walk back and forth, and some tools also pull back and forth. In particular, there are some processes behind the tiling, such as painting, painting, carpentry, etc. This will lead to scratches on the surface of the cement floor tiles that have already been paved, loosening of the whole, surface contamination and other problems. Therefore, it is necessary to cover and protect the ceramic rustic tiles that are paved, and require the tiles to be paved for at least 24 hours before they can move around.

In order to have a better effect after the paving is stuck, the U.S. sewing process is generally used. after the U.S. sewing, the gap is not yellow, moldy and easier to clean. However, the old pottery has to remind us that the U.S. joints will not be carried out until the tiles design are dry and solid. Avoid the hidden danger of tiles loosening and leaving hollows and falling off due to the us joint construction on the surface of the tiles.

The best decoration on the wall is BARANA tiles

/in /by

There are many kinds of decorative materials on walls, wallpaper, mural, latex paint and so on. But for thousands of years people are most willing to accept the tiles, the emergence of various new type of wall tiles, such as the octagonal tiles, irregular tiles design, bread tiles price and so on, cater to the people’s consumption psychology. Smooth and bright appearance is very suitable for people’s fast-paced lifestyle. Today, with the rapid economic development, people do not have time to enjoy the life of pleasure and leisure. The decorate tiles with bright colors and rich texture is always loved by people

The pursuit of perfect life is the eternal ideal of human beings. Housing as the most important place for human space is a society, the culture and history of a country, small to a family, and housing embodies the material civilization of the home owner and family life, and more spiritual civilization. Therefore, the taste of housing directly reflects the quality of life of individuals and families. Cultural taste and artistic taste. BARANA tiles design, dedicated to improve the quality of contemporary home life, the introduction of culture, art and spirit into the design of tiles price, so that the cold decorative materials have the humanistic spirit.

BARANA floor tiles collection of “fashion elements” bathroom tiles products, the art and fashion, aesthetics and life into one, not only to meet the users’ freshness, but also to meet the different styles of decoration requirements. The design inspiration of the BARANA marble tiles collection comes from Mont Napoleon street, Milan, Italy. Here is the world’s most classic and most artistic brand. Combined with the impression of the mask, the inspirations are integrated into tiles design.

With the artistic style of pop art and Scotland Ge as the source, combined with ceramic production technology, the design tour of BARANA cement tiles collection has been opened. In life, fashion is a kind of complex. BARANA fashion collection in modern floor tiles collection is personality, subversion and freshman.

A piece of polished tiles, colorful the whole world should have a beautiful,ceramic are very classic interior design elements, from the aesthetic point of view, whether from color, pattern or history, represents the highest level of indoor cognition. From the market point of view, the cheap tiles in recent years have almost never been absent. They represent the favor of consumers, especially young consumers. Rejection of monotony, ornamental tiles, simple elements can also create novel and unique visual effects, and the space becomes vivid. Highlight the bright spots, the charming eye pattern, with modern style, post-modern style, new classical style, LOFT space skillful. Colorful tiles can create varied spatial effects and meet the needs of various styles.

With the improvement of people’s consumption level and quality of life, stylized kitchen tiles have been increasingly sought after, and are concentrated on hand painted tiles and design tiles. The BARANA glazed tiles collection advocates “making flooring tiles into the artistic sentiment”. The design of the kitchen wall  tiles focuses on continuous innovation, shape and color, design and perspective, ideal and emotion, and perfect integration of hand and art.

Each colorful tiles are heavy blessing and hope. From a piece of tiles, we can see your ambition, perhaps it is the the longing for “the sky high to fly, the sea by the sea”, and perhaps the hope of “more than a year.” The story of every tile are also a projection of the desire of the consumer. The wall tiles can not only decorate life, but also be the projection of ideal life and emotion.

The rustic tiles emit a strong romantic atmosphere and express a comprehensive and strong devotion to nature. Through the texture, color, texture and schema of the rustic tiles, especially the subtle processing of the dark edge to the light color surface, and the strong and unrestrained painting marks, the historical beauty of the color difference makes us hear the dim bell of the Middle Ages in the early morning of the continental Europe. Looking back, it seems that the kiln fire raged in the Tang, song, Ming and Qing Dynasties. A long memory, a beautiful picture scroll, with the flowing brush of the rustic tiles, the one point one painting unfolds in front of our eyes, and she only customizations to know you only.

Balcony must paste tiles, and this paste, nice and practical.

/in /by

Wood floors are wet and easy to corrode. They are not recommended for balconies. As a high quality substitute for wood flooring tiles, wooden tiles have both comfortable and natural wood grain texture, and it can also be waterproof and anti-corrosion. The daily maintenance is also very convenient. Different colors and different styles of wood block tiles make outdoor balcony become a simple and peaceful space. Wood grain tiles + green planting is the best match, allowing you to feel the breath of nature through the urban walls.

Whether it is the traditional style of the traditional style of the old style of rustic tiles, or in the specifications and tonal breakthrough more modern rustic tiles, greatly enriched the choice of the balcony of the tiles design. The traditional rustic tiles with Matt, skid resistance, deep tint and small specifications has a unique sense of heavy weight, which is suitable for creating a low-key and steady balcony style. The modern rustic tiles with elegant colors and specifications is even more low-key and elegant. Colorful, changeable patterns of ceramic tiles are used in the small balcony, and the space becomes colorful.

The highly coloured tiles make the modern gorgeous avant garde balcony with rich patterns and colors. In addition to the indoor space, avant garde cement ash can also be used to create a simple industrial balcony. The cement tiles with a slight color is less cold and a little warm. Splinter tiles price are mostly continuous flooring tiles. With the gradual recognition of decorative effects, this tile has begun to be liked by everyone.

In the selection of the size of the balcony tiles, different people have different views, according to the preferences of the individual to choose, at the same time, we should pay attention to the long and wide proportion of the balcony. For people who like small tiles, the long terrace can be used to lay small wall tiles, or to buy large tiles by remolding, as long as the length and width of the balcony will be laid down. On the other hand, the balcony area is not very large. Small space selection of small outdoor tiles can better support the sense of space in the space. It seems that the fat people are suitable for wearing vertical stripes do not appear fat, thin people to wear cross stripes do not appear thin is a reason, so the size of the balcony floor tiles is relatively small size choice is good.

Some people like to use large floor tiles, in fact, the selection of large size floor tiles is also very good, the balcony floor tile size selection is large, so that the ground seam and small floor tiles to be laid out a lot less, it looks more beautiful, On the other hand, the size of the balcony floor tile design selection is large, the paved balcony seams are few, so it is easier to clean up, and the small tile paved out of the balcony time for a long time too many small gaps will become black lines.