Entries by administrator

How Using a Floor Gap Fixer?

Purchase a floor gap fixer tool. These days, many companies sell special devices designed to make it easier to close small gaps in hardwood and laminate flooring. These most often take the form of small, heavy rectangular blocks. The blocks feature an adhesive rubber face that provides traction to maneuver the slipped plank back into […]

How Removing Debris from the Floor?

Sweep the floor with a soft broom. Take a soft dust mop or a broom with soft bristles and sweep the floor. Make sure to sweep up as much debris as you can. Pay special attention to areas along walls or doors. Be careful using a vacuum. If you choose to use a vacuum, you […]

How to Wash Marble Floors?

Marble is a somewhat soft and porous stone that needs to be cleaned with care. Due to the traffic they get, marble floors, especially, need extra care. There are, thankfully, several ways to safely clean marble floors. By using appropriate cleaning products and avoiding things that could damage your floor, you’ll be better prepared to […]

How Securing the Buff Floors Area?

Remove movable items from the floor being buffed. Place these items in a separate room or hallway. Moving these items allows you to buff the area under and around them. Otherwise, it will be very difficult for you to get an even shine. Keep in mind that a buffer is a bulky machine that can […]

How Cleaning the Buff Floor?

Use a broom or dust mop to remove any debris. Start in the corner of the room and slowly sweep the entire room. Make sure you get the floor as clean as possible. Otherwise, you risk buffing dirt into the finish. Over time, buffing a dirty floor can permanently alter the color of your floor […]

How Buffing Your Floor by Hand?

Start in the far corner of the room. Then, work your way backward toward the entrance to the room. Don’t pass back over areas you’ve already buffed, as they need time to dry. Work in 3 ft (0.91 m) by 3 ft (0.91 m) sections until you finish buffing. Focusing on small sections will help […]

How Waxing Your Floor?

You can use an auto scrubber or floor machine for this step as well, as long as you change the pad beforehand. Don’t use the same pad you used to apply or wipe up the stripping solution. Wash all tools used. Thoroughly clean any tools used, including the interior of machinery hoses and tanks. If […]

How to Buff Floors?

If you have scratched or scuffed floors, buffing them can refresh their shine. You can improve the look of your floors by buffing them by hand, but it’s best to buy or rent a floor buffer, which uses slow speeds and high pressure to remove and replace the top layer of finish on your flooring. […]

How Using a Spray Buffer?

Spray the buffing solution onto your floor, if you’re using it. For best results, use a professional sprayer or a product that comes with a spray nozzle. Start in the far corner of the room and work your way toward the other side. Aim the spray 2–4 ft (61–122 cm) in front of the buffer […]

How Avoiding Damage to Your Floor?

Wash your floor immediately after a spill. All spills on marble should be cleaned up immediately. This is because marble is a porous material and can absorb spills. If you let something sit too long, your marble will discolor or stain. Take a wet microfiber cloth and use it to blot up anything you’ve spilled […]