Posts

The choice of floor tiles in family decoration is a big study

/in /by

Floor tile is a large proportion of decoration, and also the largest display area in home decoration. It is the background of style. Understanding the knowledge of these tiles can better communicate with designers and make the most satisfactory home style.

From the material,best floor tiles wear-resistant, waterproof, moisture-proof features not only meet the living room, kitchen, toilet, tread on wear and water frequent requirements, but also can show a good taste of the home, so the general decoration can not be paved with bath floor tiles. From the decoration style, whether you are Chinese, European style, American style, or modern simplicity, floor laying, wall decoration, more floor tiles are indispensable.

Flooring tile matching principle: single tone, the pursuit of unity, small comparison, focusing on practicality. The most important thing is the style that you like. If the living room is well lit (facing the South and long sunshine time), it is suitable for using dark colors and cold tonal subway floor tiles. If it is bright, it will make the room brightness too high, no matter it is beautiful or visual health is not desirable. If the living room is not well lit (sunshine time is in the afternoon or light time is short), it is suitable to adjust with bright colors and warm tones.

We should not blindly pursue the use of large-area ceramic tile flooring. We should tailor them to 40sqm. The following specifications are recommended to be use ceramic floor tiles of 600 x 600mm. Rooms above 40sqm use ceramic floor of 800 x 800mm specifications. The long hall uses the stripe texture floor tile design, the square living room uses the miscellaneous texture floor tile. Texture plays an important role in improving the overall effect of living room. The selection is not only considering personal hobbies, but also paying attention to space collocation.

The home’s overall style and furnishings should be harmonious and unified. In contrast color processing, visual transition is necessary. When laying the floor tiles in kitchen, we must consider the brightness of floor tiles in addition to color. The specific requirements are: the floor tiles same as the wall, or slightly lower than the wall.

The sofa uses the rice white, matches with the black tea table, matches the gray floor tiles, the three forms the very good black-and-white ash transition, from the vision makes the person tight nerve to get soothing. The main body of the TV background wall is “gray black” variegated brick, matching white gray side walls, which is simple and fashionable. In order to reduce the visual fatigue caused by the symmetry of the structure of the background wall, the green planting is collocated on both sides, and the coordination between the design elements is increased, and the whole background wall is simple, simple and simple.

The floor tiles of soft sofa area are replaced with brightly colored small size tiles, making color matching. This design eliminates the monotony of large area of grey floor tiles. The black edge, the white and dark red ceramic kitchen floor tile area and the white sofa, the black tea table hue harmonious, very good highlights each element’s texture.

The hanging ceiling of the living room does not use the chandelier, nor does it hang the task objects, maximizing the living room elements, leaving enough spacious space to meet the people’s demand for space instincts. The open kitchen is more in line with the modern style design requirements. Compared with the enclosed kitchen, the open kitchen makes the space more spacious on the whole space.

The study is a public area for a family. It is spacious and has a wide view. It is convenient to take books and take back books. The bookshelves depend on the wall as a whole, and different books are classified by interlaced cells. Desk is opposite to window, reasonable use natural light, also facilitate long time read a Book overlooking, alleviate eye fatigue. The desk shelf is bright white, and the stool is dark with a simple style to maximize the release of space. From the overall perspective, the living room, kitchen, each structure lines smooth, bright and coordinated. It gives a feeling of refreshness. The whole hue of the bedroom is warm and soft. The design of bed, lamp, sofa and wardrobe can make good use of bedroom space and highlight the unique temperament and refined taste of the room owner.

What is the preparatory work for the tile paving?

/in /by

The tile paving is small and small. It seems to be very small. It seems to be very simple. It seems that there will be no big event, but it is always annoying if it is done. Details are very important, many of the problems, in fact, are not done in some details, tile paving is the same, with everyone to share some tiles paving, some often ignored small details.

The wall should be dealt with well. Some walls are cracked, or walls are connected to other materials, such as cement walls and woodworking boards. Before laying tiles, it is necessary to connect the wall cracks with wire mesh, then reinforce with cement, and then lay up tile again, so as to avoid cracking of later ceramic tiles.

Whether the tile needs water or not, it is necessary to see the specific situation. In the use of ordinary cement mortar paving, some of the higher water absorption of pottery tiles, that is what we usually say wall tiles, that is the need for water, and must bubble foot. And some floor tiles with low water absorption, such as polished tiles, marble tiles, etc., do not soak water, whether they stick to the ground or on the wall. There is another case. If it is paved with ceramic floor tile, no matter whether it is tile or floor tile, it needs no water. When the water is needed, you should pay attention to it. Every batch of tile time is as much as possible, and the water used is as clean as possible so as to avoid the color difference after the paving. There is also a point, the need to make water tiles as much as necessary to bubble water, how much to use in advance to bubble how much, especially when put to the back, do not make a whole body to bubble, if the bubble is not finished, it is unable to return.

About the powder of the tile billet. Magnesium Oxide and magnesium carbonate are a high temperature resistant white powder. Generally, the ceramic kiln floor tiles are at the highest temperature of more than 1200 degrees, when the tile bottom is close to melting (the expression may be inaccurate, but the tile embryo is soft). In order to avoid sticky stick of tile embryo and kiln, using the characteristics of high temperature resistance of Magnesium Oxide and magnesium carbonate, before the tile embryo entered the kiln, a layer of Magnesium Oxide pulp was brushed on the bottom of the embryo to play the role of isolation. This will avoid sticking sticky tiles and sticks in high temperature kilns. Therefore, sometimes we will find that there are many powders at the bottom of the billet, and we should try to remove the white powder before paving. Otherwise, it will cause the cement mortar to be stuck to the tile, causing the hollowing off.

Many people think that it is a waste of time to per pave tiles before paving. In fact, the old pottery people think that the front row of tile is to spend a little time, but in the row of tiles, can avoid the generation of some of the following problems, for example, when the tile, can look at the tiles of the supporting waist line, tile or processing tile and the main tiles with the main tile? Besides, there are obvious defects on the main tile surface, whether there is chromatic aberration, whether the size error is large or not. In front of the tiles, the old pottery also hopes that the owner can take out every tile that is to be used, and give a detailed account of the position, quantity and special requirements of the paving, which can avoid the paving error.

Before paving, we must clean up the wall. Before we scrape the putty wall, we need to shovel the putty and lay the tiles again. Otherwise, it will easily cause the hollow drum to fall off. If you want to use tile glue to paste the tiles later, you must make the wall level. If we use ordinary cement mortar to paste, we should pay attention to the proportion of cement sand, tile 1:3, floor tile 1:2, cement grade 32.5 cement. If the floor tiles are on the wall, it is suggested that tile glue or adhesive should be used for paving, so as to avoid the drums falling off later.