Posts

How to Using Vinegar and Ammonia to Clean Ceramic Tile Grout?

/in /by

Do a preliminary clean. Before you get down to the deep cleaning methods, it is necessary to do a regular clean up of your floor tile. Follow your regular cleaning process of wiping down counters or sweeping and mopping floors. This will get all the top layer of scum off, and make your work a bit easier.


Create your solution. In a bucket or large bowl, mix 7 cups of warm water, 1/2 cup of baking soda, 1/3 cup of ammonia, and 1/4 cup of white vinegar. Allow all the ingredients to mix completely, so the baking soda is dissolved. Pour the mixture in a spray bottle. Keeping this in a spray bottle will make it easy to mist the dirtiest areas specifically, and for storage. Fill your spray bottle completely, and then shake the solution well.


Spray the grout. Start on a small area, only as large as 1-2 square feet total. Spray your cleaning solution over the grout so it is dampened. Allow the mixture to set for 3-5 minutes to work into the grout. Begin scrubbing. Use a scrubbing brush of your choice – a hard bristled cleaning brush, a toothbrush, or a magic eraser are all good options. Put some hard work into your scrubbing to get the ground-in dirt out from between your spots tiles.


Clean up the dirty liquid. All y our scrubbing has probably created little pools of dirty liquid on your wall tiles. Use a damp cloth to wipe this up, and wring it out into a separate container. This will keep your kitchen tiles cleaner in the end. Complete your grout cleaning. Use the above process to move onto the rest of your grout, giving all it a thorough cleaning. Focus on simply getting the dirt and dark areas out of your grout, exposing the natural white underneath.


Do a final wipe-down. When you are convinced your grout cleaning is finished, do a second clean up of the entire area. If you were working on counters or in a bathroom, use a generic cleaning spray and rag to wipe down your element tiles.For floors, go ahead, mop your tiles again, and towel dry.

How to Protect Bathroom Grout?

/in /by

Bathroom grout is usually made of sand, cement and water. Although it is traditionally white, it is now made and sold in a number of colors. Grout adheres your bathroom tile to the walls, floors or ceilings. It also absorbs water, mold and mildew because it is a porous material. In order to protect bathroom grout from discoloration and bacteria, it is essential to clean, dry and seal the grout regularly. Read more to find out how to protect bathroom grout.

Dry your bathroom after every shower or cleaning. Use a squeegee, towel or cloth to dry all marble tiles after they get wet. Make sure you have a bathroom fan or window that can suck the excess moisture out from the air. If you do not do this, grout will absorb excess moisture, which will turn into mold and mildew. It will stain and breakdown the structure of the grout, causing it to crumble prematurely. In extreme cases, the water and mold can get behind the grout and into the floor tiles.

Clean bathroom tile and grout weekly with a pH neutral cleaner. Many multipurpose surface cleaners are pH neutral, so check on the bottle before you buy and use it. A neutral cleaner means that the pH, or “potential of hydrogen” is not acidic or alkali. The potential of hydrogen is judged on a scale of 0 to 14, with 0 to 6.9 being acidic, 7 being neutral, and 7.1 to 14 being alkali. Water is also neutral, at a pH level of 7.

Clean the rustic tile and grout occasionally with a mild alkali cleaner. The frequency of deep cleaning grout depends upon the amount of traffic the bathroom gets. Deep clean every month, if it is heavily used, with 1 of the 2 methods below.

Mix 1/2 cup of powdered oxygen bleach into a gallon of water. Use a spoon to stir it until it is completely dissolved. Pour the mixture all over your dry bathroom grout. Reapply after the solution soaks into the grout, or about every 15 minutes for vertical surfaces. After 30 minutes scrub the tile and grout with a nylon brush, or a toothbrush for an extra thorough cleaning. Rinse well with warm water and dry with a towel or squeegee. The more you reapply the oxygen bleach on your wall tile and scrub it, the cleaner your grout will become.