Posts

Vacuum Cleaning Floor Before Clean the Tile Floor

/in /by

 

Clean the active floor with a vacuum cleaner at least 3 times a week. The floors of the kitchen and living room need to be vacuumed regularly, and as the number of people living in the house increases, so does the floor. The area floor with less activity, such as bedroom floor, should be cleaned once a week. 

According to general experience, the number of times a week that an area is vacuumed is the same as the number of people using the space. For example, one person’s bedroom floor can be cleaned once a week. However, a living area with four people should be cleaned four times a week.

If your pet is depilated or your child is allergic, you need to vacuum the floor frequently. Move all the small furniture out of the room once a month, so you can vacuum the floor under the room. Move all the big furniture out of the room and vacuum the floor once or twice a year.

Clean the floor first. The high efficiency air filter in the modern vacuum cleaner can prevent small pieces from being discharged from the vacuum cleaner, which means you don’t need to dust the floor again. Wipe objects, surfaces, and furniture with microfiber cloth.

You shake the curtains off when you dust them. Leave the curtain dust on the floor for a few minutes before vacuuming. Remove the big toys and pet bed from the floor. At this point, anything touching the floor should be moved. So you can vacuum the floor of the room thoroughly.

How to Protect Marble Tile?

/in /by

Apply a poultice. For stubborn or old stains, you may need a poultice, which is a thick, paste-like cleanser, to get them off your marble tile. You can buy commercially-made poultice powder that you simply combine with water. Follow the instructions to mix the paste, and apply it generously to the stain. Allow it to sit for 1 to 2 days under plastic wrap before removing the plastic and letting it dry. You can then rinse the poultice away with distilled water and buff it dry with a clean, soft cloth.

You can find poultice powder at your local hardware, home improvement, or stone supply store. When applying the poultice to the stain, the layer should be approximately ¼ to ½ inch thick. Secure the plastic wrap over the poultice with painter’s tape to ensure that it’s airtight.

Wipe up spills quickly. Anytime that a liquid sits on the surface of your tile design, it has the potential to stain or discolor the marble. Acidic liquids, such as citrus juices, wine, coffee, and vinegar, are a particular danger to marble, but even a puddle of water that isn’t cleaned up quickly can stain the tile. To avoid discolorations, wipe up any spills on the marble as soon as you see them.

You can wipe up water with paper towel or a clean cloth, but if an acidic liquid spills on the subway tile, wipe it up and then clean the air with a cloth dampened with water and dish soap. Make sure to dry the surface thoroughly when you’re done. If you have marble in your bathroom, remember to dry the wood tile after every shower and bath.

Use protective coverings. The best way to protect your marble tile from stains, discoloration, and other damage is to cover it. Use coasters and trivets on tiled countertops to keep any liquids or food that drip over the edge of a glass or pan from falling on the marble. On tile floors, place mats or throw rugs near doorways so you can wipe dirt and debris off your feet before walking across the marble. If you want to protect a marble tile floor from scratches, try placing rubber mats under metal furniture and accessories. It’s also a good idea to place them under plants and flower pots.

Seal the wood marble tile monthly. To protect your marble surface from stains and discoloration, it’s important to apply a sealant approximately once a month. It forms a protective film over the marble so you have more time to wipe up spills and clean stains. You can purchase marble sealer at your local hardware, home improvement, or stone supply store. Follow the directions on the bottle, but you usually mist it on, allow it to soak in, and then wipe down the surface. Make sure to start with clean marble tile before applying the sealer. If you want extra protection, you can apply a second coat of sealer after the first one is completely dry.