Posts

How to Clean sandstone tiles?

sandstone tiles is a natural stone that can be used inside and outside of your home for floor tiles, wall surfaces, monuments, and fireplaces. It is a particularly porous stone, so it can soak up liquids and get stained quickly if it’s not cleaned properly. In order to clean your sandstone tiles, you just need some common cleaning products and the proper technique.


With these things and a little bit of elbow grease your sandstone tiles can remain beautiful or look good as new. Acidic cleaners can etch the surface of the stone, which will potentially change the texture and the color of the stone permanently. Use dish soap if plain water doesn’t clean the surface enough.


In most cases, cleaning sandstone tiles with plain water works perfectly well. However, if you feel that you need some cleanser, use a very small amount of plain dish soap. Put a small squirt of soap on your damp cloth and rub it over the surface. Wipe the surface with a clean area of your cloth afterwords to clean the soap off of the surface.


Dry the surface off with a towel. You should not leave standing water on the surface of sandstone tiles, as it will gradually absorb it. Instead, once you are done cleaning, wipe off the surface until it is dry. Use a soft, clean, and dry rag to wipe down the surface so that it stays clean and doesn’t doesn’t get scratched.


After you think you’ve gotten the stain out, wipe the mixture off of the stone. Allow the area to dry to determine if the stain is gone. If it is, use a clean area on the cloth to remove any baking soda residue that remains. If the stain remains, apply the paste again and allow it to sit longer than 15 minutes before scrubbing it a second time.

How Cleaning Grout in Tile Flooring?

Try using a pencil eraser to wipe the tiles. This household trick is great for cleaning small sections of stained grout. Simply run the eraser of a number 2 pencil over the stain until it is gone. Use a clean white or pink eraser. Sandpaper or an abrasive grout tool may be more effective for stubborn surface stains.

Use baking soda. Make a paste with baking soda and water. Apply it to the dirty grout using an old toothbrush. Scrub the paste into the grout well. Wash the grout with warm water when you are finished. Most dirty grout can be brightened using this natural method. For the tougher stains, allow the paste to sit for a few minutes before you start scrubbing.

Use bleach to remove stains that are more difficult to remove on tiles. If natural methods don’t work, try a bleach solution. Mix a 75/25 solution of bleach and water if your grout is white. If the grout is colored, you will have to use plain water. Do not use bleach on colored grout as it may remove the coloring. Use a toothbrush or the edge of a sponge to clean the grout with the solution. Rinse the floor with warm water after you are done to remove all traces of bleach.

Be careful to not get the bleach solution on the tiles. While using the bleach, wear a pair of rubber gloves to protect your hands. After the floor is completely dry, carefully apply a coat of grout sealer to the grout between the tiles to prevent it from absorbing dirt in the future.

If you don’t like using bleach, you may be able to find a commercial grout cleaner that will be stronger than a natural cleaning product. However, check the label to make sure it doesn’t list bleach as an ingredient.

Marble Tile Home Maintenance Cheats

1, scrub marble tiles, do not use steel wire ball and other hard objects, generally with a wet cloth can remove surface stains.

2, the bathroom marble tiles if rust, dirt, soap and smear greasy, can buy detergent paste clean detergent paste is not expensive.

3, ceramic tile crevice can use brush dipped in a little decontamination cream to remove dirt, in order to prevent water seepage and mold growth, can brush waterproof agent in the crevice.

4, move heavy furniture, what are also a little bit careful, do not drag away, so as not to scratch the tiles surface layer.

The problem of maintenance of natural marble caused by everyone is due to the natural property of natural marble itself. Because of its loose material, easy to absorb water, stains, very sensitive to scratches and damage. Especially on the ground daily walking wear, if there is no regular maintenance care, it will lose luster, become gray, and even touch feel rough.

But unlike the marble tile tile properties, high density, high hardness, not easy to scratch, not water, corrosion resistance, stain is only on the tile surface, do not penetrate to the inside of the brick aesthetic.

Mix Modern Bricks And Create Fashionable Space

Modern antique brick is a nostalgic expression

Modern antique brick is a kind of natural and antique to a nostalgic state of performance, so that the entire space to create an antique flavor. The modern antique brick has several basic characteristics, is a modern antique brick reflects a natural taste in color; it is two in the color does not like other products so bright, reflect a kind of introverted cultural atmosphere, it will create a cultural atmosphere of the space; three is difficult to mold process get the biggest play in other products, but in the antique brick body can use many sophisticated technology to the performance.

Create space for fashion petty bourgeoisie

Modern Antique brick is suitable for all sorts of collocation. For example, Italy has adopted the most popular blank design in China, using metal edging to close edges, while forming a mashup on the material. Through the mix, the entire space will not be like the whole shop tiles are not so rigid, pixel tiles so dull, this mix of jumping the whole spatial sense of fashion and young feeling very well, but also with a little taste of the petty bourgeoisie, is by domestic designers.

Mix modern Antique brick, create fashionable space

The modern antique brick in color and features, suitable for collocation in the family bathroom, living room, balcony and other places, will create a simple and pure feeling, is currently in the domestic popular style tiles.