Posts

How Tracing Tile Cut Lines before Toilet Installation?

Tile the areas away from the toilet flange first. When tiling a bathroom, mark out your desired grid pattern on the floor, and lay tile over the unobstructed areas first. Don’t tile around the toilet flange—the circular piece that connects to the drain pipe and upon which the toilet itself will rest—until the end.


Draw out a grid pattern for the tile layout on paper, and then on the subfloor itself, that reduces the number of tile cuts you need to make. If you’re using larger tiles—e.g., 12 by 12 in (30 by 30 cm) or larger—you may be able to cut a circle out of a single tile to go around the flange.

Cut one or more sheets of paper that match the size of your tiles. If you need to cut 1 tile to go around the flange, cut 1 sheet of paper; if you need 4 tiles, cut 4 sheets of paper. Be as precise as possible in sizing the sheets of paper properly. For instance, if your tiles are 8 by 8 in (20 by 20 cm), cut your sheets of paper to those dimensions.


Lay the sheet(s) of paper in place, overlapping the flange. Place the sheet(s) of paper exactly where the tile(s) will go, making sure to account for the spacing of your grout lines. That is, if your other tiles are spaced 0.125 in (0.32 cm) apart due to the grout lines, leave this same gap between the set tiles and your paper.


You can employ the same plastic spacers you use when laying the tile to make sure your grout line spacing is consistent with your paper templates. If you only need to cut a single tile, just lay a single sheet of paper right over the flange.

How Maintaining the Tile Floor?

Vacuum or sweep your tile floor every day. The best way to maintain your tile floor’s polish and shine is to keep it clean. Sweeping and vacuuming will remove dirt and debris that can build up and cause your tile to lose its luster. Even worse, dirt that is left for a long time can get smashed into the tile and turn into grimy stains.

 

If you plan to mop, make sure you sweep or vacuum first. Mop the floor regularly. In addition to sweeping or vacuuming dirt and debris, it’s important to mop your tile floor to maintain its polish. This doesn’t necessarily mean dragging the bucket and soap out every other day. If your floor doesn’t require a heavy cleaning, a damp mop will be enough to keep it clean.

 

Keep your mop clean so you’re not spreading dirt around your tile floors when you mop. You can also use dry mops like a Swiffer for an easy clean. Clean any spills or stains quickly. To keep your tile floor polished and without any deep stains, it’s important that you clean up any spills that occur as soon as possible.

 

Things happen, stuff spills, but the longer a spill sits, the more it can stain and soak into your tile and grout. They can also cause your floor to be sticky, which can attract dust and dirt to adhere to your tile. Use disinfectant if necessary, but sparingly, as the chemicals can discolor tile floor.

 

Buff the tile floor with a microfiber cloth. Buffing your tile floor can really bring out its shine and add a smooth texture to the finish. Use a microfiber cloth and buff the floor in smooth, even circular motions. Start at one end of the room and work your way across so you don’t miss any sections. Some dry mops have microfiber pad attachments you can use as well.

How is difficult for selection tiles and style matching, BARANA teach you in 5 minutes?

Choosing tile is not an easy task. There are many kinds and styles. When selecting tiles, we should not only identify the quality of grey tiles, but also match them. When many people buy Tiles price, they run around the market without any clue, feel very helpless about it.

Tile belongs to the decoration main material, is the decoration expense main item. The quality and price of tiles on the market are also uneven. Many people do not know how to distinguish the quality of the ceramic tile sizes. Because of the loss of quality in the tiles, people usually choose to buy first-line brand tiles flooring, and spend more money to make peace. If the budget is relatively small, they will choose to buy tiles which are relatively cheap. Then, how can we choose the best tile when the budget is limited? How to pursue the best price ratio.

tile’s body is a very important index to judge whether ceramic tile shower are good or bad. Turn the tiles over and look at the back. The white clay is pure porcelain and good raw material. The side section of ceramic floor has obvious cross cutting pattern, which is usually made by small factories in production equipment. If we touch with our hands, we can also feel that the tiles are smooth and delicate. The tiles with poor quality has a rough texture on the side of the touch.

The difference between porcelain tiles and ceramic tiles is that the firing time and temperature are different. The difference is water absorption. The water absorption of porcelain floor tiles is very low, and it does not absorb water basically, ceramic floor tiles have obvious water absorption. Semi ceramic tiles design are also called ceramic wall tiles, which are far less dense than all tiles. They are not strong enough to resist pressure and impact. In daily home life, if you accidentally drop something onto the floor, the porcelain will easily be removed from the glaze, once the glazed surface is destroyed, it can not be repaired. If you choose porcelain tiles as wall tiles, remember that when laying tiles: Do not use cement. Make sure you use strong tile adhesive. Because marble porcelain tiles will be peeling off with cement paste, and the tile glue should not be mixed with cement paving, otherwise, the tiles will fall off later.

Floor tiles were first popular in pure color paving, and then developed lace patterns, patterns and dark patterns. With no more space for the pattern tiles, The designer began to work on the Tile’s figure . Some special tiles design always give people a very high and expensive feeling. In fact, there may not be a great difference in the price of tiles, but because of this unique beauty, it is very touching. Compared with the regular square tiles, the six corner tiles can be smart and simple. A large area of pure color paving makes the space simple and luxurious. Help you easily concavity out of the light luxury kitchen and bathroom. If you want to break the low tone of pure color, try random paving. Different color blocks collide with each other, highlighting the artistic sense of the geometric tiles surface.

The smooth flowing water tiles are like the ripples of the lake’s water, full of romanticism, it is suitable for small area home decoration, usually used in kitchen and bathroom wall tiles. The gradual paving method allows this area to transform into waves. If you want to use cheap tiles in large areas, try to choose a pure color style tiles. Or similar colors, tiles with deep shades can create an interesting sense of hierarchy. And the color and texture of the tiles are covered with walls. The whole space has a feeling of slow flow of water waves, especially suitable for bathrooms.

There are many changes in the stitching form of the three-dimensional triangular tiles. You can assemble them in various ways like jigsaw puzzle. Of course, different tile splicing will produce different effects, with subtle changes. Corrugated knitted tiles are suitable for outdoor applications. Under the cooperation of lighting, it can show the light and shadow effect that ordinary tiles cannot form, it’s like letting a building wear a woven coat.

How To Maintain Waterproof Floor Tile?

1, at home free time, most of the women will be cleaning, for the floor, we usually have to clean up, it is best to regularly clean, select the appropriate cleaning agent for removal. Acid and alkali properties of the cleaning agent can effectively remove ceramic tile surface stains, but because of the acid-base composition of ceramic tile surface may cause corrosion, it is not suitable for frequent use. Should use more ph value for the neutral cleaning agent, daily cleaning can be used household cleaning detergent, soap and other cleaning.

2, on the tile, usually in each crevice, the accumulation of dirt and bacteria are the most, so in cleaning and maintenance, need to be particularly careful. Which is the main raw material and white cement putty, so the dirt adhesion of the above it is difficult to clean, in tile paving completed and daily after cleaning, can be in the crevice of a waterproof agent with brush brush, can play the role of waterproof mildew.