The history of  ceramic tiles sealant evolution: when there was no such thing as “tiles sealant”, it was said to sew. White cement is the most commonly used to fill in. Using white cement as a sealant, it usually adds quartz sand to increase strength and whitening titanium dioxide. The price is low, the whiteness is very high, but later it tends to moldy and darkened. It looks particularly dirty, but it affects the appearance. No one has used it now. Unless your tile worker is in a special pit, you will fool him with white cement if you do not specify.

On the basis of white cement, adding other materials to improve it becomes a floor tiles sealant. The cement tiles sealant has improved waterproof and antifouling properties, and there are many colors to choose from. It is sure that the ceramic tile flooring sealant is not good, in fact, the filling agent is not so unbearable, the normal family use, the mildew proof waterproof effect is good. At present, most of the family sealants are filled with tiles sealant, and the price ratio is high. The United States sealant is a product which is upgraded on the basis of the tiles sealant. It has more color, better waterproof property, better decoration and practicability than the sealant. The traditional sealant is not used alone, but needs to be applied to the surface of the sealant to protect the sealant while beautifying the gap. The new type of sealant that is out now does not need a sealant as the foundation and can be used directly.

Will the tiles design seams become dirty? Yes, It will. There is no such thing as clean and new in the world, especially in damp environment. General sealant and seams are two or three years after the beginning of discoloration, if the use of dark color, it can not be seen basically, white color will be a little more obvious. Business publicity of what the tiles seams for 10 years will not turn black, it means that the material itself will not turn black, if used in wall tiles, flooring tiles in the gap, every day its surface will contact a large number of dirty things, the same dirty is impossible. However, from the terms of service life, the more expensive it is, the longer it can be carried out. So no matter what you choose to sew, it will be better to choose dark color.

When you use ceramic tile shower beauty seams, you will meet with half filled or filled options. Full fill, the gap is filled with the seams filled; Half filling is to use a stitching agent to fill part of the tiles as a base, and the rest of the surface is filled with sealant. The routine is to fill of the sealant. Because they are made of tiles beauty seams, the advantages are strong enough to maximize service life, though the price is relatively high. So if the gap is relatively small, fill it in directly. If you fill it in half, it will not be enough for the seams to solidify. Half fill because the seams below the seams with the top of the seams are not the same material, the service life will be shortened, but the benefits of half filling is to save money, after all, seams cost a lot more than sealant, the more seams, the more expensive. If the gap is large, we can try to fill it in half from the budget point of view.

At least 24 hours after the laying of the grey ceramic tile, and then wait until the base surface is dry. Any tiles can be made of seams. The so-called seamless tiles also need to be sewn up, otherwise it will be annoyed by drums and cracks. Generally, seamless tiles leave 1mm width crevice, and archaize tiles are ideal for 3-5mm width gap. Family decoration whole tiles are used by the sealant sewing agent is the practice of local tyrants, the general family does not need the whole house beautiful seam. The sealant can meet the normal needs, and the most expensive sealant is more waterproof and mildew resistant than the sealant, and more resistant to dirt. Therefore, it is not wrong to spend money in making tiles. Some areas in the home will do better.