When polishing tile, glaze tile, microcrystalline stone tile and other bright face tiles, many people will have such experience, think that the tiles construction is finished on the ground, is this true right? In fact, there is a very important process after the tile is completed, that is, wax removal, but it is such a simple process that is often easily ignored.
The ceramic tiles will be beforehand treated before they go out of the factory. The wax treatment is mainly to prevent the tile from accidental damage in the future, and the thick surface of the wax is also the main cause of the tile dark light, so the wax layer can be well restored to the original gloss of the ceramic floor tiles, but also the wax is also available. In order to improve the antifouling performance of the ceramic tile surface, the uniform wiping of the wax can well fill the small pores on the surface of the ceramic tile, and make the anti fouling molecular distribution more uniform on the surface of the antifouling layer, thus improving its antifouling performance and wear resistance.

Wax removal can restore the gloss of ceramic flooring, improve the antifouling performance and enhance the wear resistance. The main method of removing wax for ceramic tiles is surface wiping.
Commonly used materials: double fly powder, washing powder, flour, wax powder, powder and other powder, generally recommended to use double fly powder, double fly powder is also widely used to remove wax, the main chemical composition of the double fly powder is calcium carbonate, but also contains a small amount of magnesium carbonate, double fly powder itself is no toxic, no harm to the human body, but the removal of wax needs Attention should be paid to avoiding inhalation of dust and protective mask when operating. The surface of the ceramic tiles is cleaned first, and the wax is scattered under the condition of dry surface, such as several kinds of wax removal materials mentioned above, and then wiped with a rag or dry towel.

After the polishing process, the floor tiles, generally its surface must be treated with wax, and then add a layer of plastic film to cover the surface of the ceramic tile with the same size as the size of the ceramic tile; its function is to prevent the spillover of the wax layer and stabilize the wax layer on the surface of the tile; two, as the wax is an organic chemical, if it is an organic substance. For a long time exposure in the air will be oxidized, causing the wax layer to solidify on the surface of the ceramic tile and increase the unnecessary process in the later period. Three, the ceramic tile and the ceramic tile are isolated, and the tiles and the tiles are both faced and back between the tiles and the tiles in order to avoid the surface of the tiles before packing. The rules are stacked, and the plastic film plays a good role in isolating tiles when stacking in the face of the specifications.

If the tile is paving, it will not tear off the plastic film. It may cause the tile plastic film to be hard to tear off after the completion of the tile, and it will greatly increase the workload. At the same time, it is easy to cause the unnecessary after sale problem, so it must be plastic before the tile with plastic film is paving. The film is torn off, and this action is absolutely beneficial without harm, and this step is also the key.

In fact, the plastic film on the surface of the glazed ceramic tile is only one of the packing layer, the real product is the ceramic tile. The plastic film plays a very small role in preventing the scraping, because the plastic film is the polyvinyl chloride and polyethylene chemical composition material, which itself is the material with low hardness, brittle and weak, so the surface of the ceramic tile is plastic. The so-called protective effect of material film in the later stage of ceramic tile construction is not very effective.
After the tile application is laid on the ground, it is necessary to ensure that the surface of the tile is clean and tidy, and the gravel can not be left on its surface. It is suggested that the protective layer, for example, be best used as a carton to cover the ceramic tile surface in all directions.