Posts

How Oiling Your Soapstone tiles Surface?

/in /by


Wait a full day to treat your Soapstone tiles following installation. After having your Soapstone tiles surface put in, hold off on handling it for at least 24 hours. This will give the adhesives used during the installation process time to finish curing, ensuring that each piece stays remains secure for a good long time.


Putting off cleaning or oiling your Soapstone tiles for a while will also give you time to consider whether you want to oil it at all—some homeowners prefer to let the stone develop its own unique patina organically through regular use. Clean the surface with soap and water.


Before you begin oiling your Soapstone tiles, saturate a soft, clean, lint-free cloth, microfiber towel, or sponge with a mild soapy water solution and use it to go over the entire surface. Then, wring out your cloth, re-wet it with clean water, and wipe the surface again to rinse it. Be sure to soak up any standing water or traces of soap remaining on the surface prior to proceeding.


A quick wipedown will help remove dust and other debris so it doesn’t end up in your initial coat of oil. Drizzle a small amount of mineral oil onto the surface. Use just enough oil to spread a thin coat onto the surface by hand. Pour the oil directly onto the Soapstone tiles—it’s naturally non-porous, so it won’t absorb oil or moisture.


The fact that Soapstone tiles has a solid finish also means you won’t have to worry about it feeling slick or greasy as a result of becoming clogged with oil. of oil for every 1 square foot (0.093 m2) of Soapstone tiles should be plenty.}} Tip: 1 teaspoon (4.9 mL) of oil for every 1 square foot (0.093 m2) of Soapstone tiles should be plenty.

How Cleaning Your Tile Floor Routinely?

/in /by

Sweep or vacuum twice a week. Using a dry mop or vacuum is ideal, although you can sweep with a broom if you’re in a hurry. Opt for a soft and fluffy dust mop, preferably with a removable end that’s machine washable. Don’t use a vacuum with a beater bar, which can scratch or dull your flooring. Try a vacuum attachment for bare floors or a soft head attachment.

Mops with disposable dusters are more expensive in the long run and tend not to clean as well as fluffy, washable mop heads. For quick sweeping, brooms with rubber bristles work well. Use a wet mop on unglazed tile every day. Vacuum or sweep first. Fill a bucket with plain warm water. Rinse the mop often, and replace the water when it looks dirty.

Avoid using a sponge mop, since it can drive dirty water into the grout.Unglazed tile can only be cleaned with water, thus it needs more regular cleaning than glazed tile in order to avoid staining.

 

Mop glazed tile weekly. Vacuum or sweep before using a wet mop. Fill a bucket with warm water. You can add a drop of dish soap to a gallon of water if your glazed tiles are visibly dirty. Rinse the mop frequently, and change out the water when it gets dirty. Avoid using a sponge mop, which can deposit dirty water into grout. If you used soap, follow up with at least one rinse using a mop and plain water.

Dry the floor with clean towels. This will pick up any leftover dirt, prevent water spots, and give your flooring shine. Drying your flooring is especially important if you have unglazed tiles. Unglazed tiles are more porous than glazed tiles, and if they are left wet will be more likely to accumulate organic staining from mold or mildew.