Posts

How to Clean a marble tiles Shower?

/in /by

A marble tiles shower is an elegant and chic addition to anyone’s bathroom. Unfortunately, there are also drawbacks with marble tiles, especially when you have to clean it. marble tiles is a porous rock that tends to absorb chemicals and dyes that are found in traditional cleaners. For this reason, many different things can end up ruining your shower’s sleek finish.


Luckily, if you use the right techniques and limit the chemicals you use when you clean, you can have a shiny marble tiles shower that’s free of stains and dirt. Wipe down your shower after each use. It’s important that you wipe it clean after every use because the chemicals found in your soap may hurt the marble tiles.


Use a dry cotton rag or dishcloth to wipe the moisture from the walls and basin of your shower after you use it. Fill a spray bottle with warm water a tbsp (14.7 ml) of mild dish soap. Use regular warm water to fill a spray bottle and add a tbsp (14.7 ml) of non-abrasive, pH-neutral, dish soap into the bottle.


Select an undyed dish soap that does not contain any abrasives like sand or stone, and that doesn’t contain any acids like citrus, lemon, or vinegar. It will say pH-neutral on the label of your dish soap. Conventional cleaners may contain acids that can damage the surface of your shower. There are specially made marble tiles cleaners that you can purchase at department stores or online.


Popular commercial marble tiles sprays include Black Diamond, Simple Green, and Zep marble tiles Cleaner. Spray the solution onto your shower and rub it in with a damp cloth. Coat the walls and basin of your shower with the solution and rub the solution in a small circular motion. Continue to work around your shower in small circles, concentrating on any built up mildew or dirt.

How Choosing Pool Tile by Material?

/in /by

Use porcelain if you’re on a budget. Porcelain tile is the cheapest and most common tile finishing option for pools. Create a beautiful mosaic or pattern using porcelain tile to enhance your pool design. Finish with stone for a natural look. Stone pool tile blends nicely with surrounding landscaping, and it’s great for young children because of its slip-resistant properties.

Use stone tile made from a beautiful type of stone like sandstone, limestone, or granite to create a smooth, sophisticated finish. Go with glass for a luxurious touch. Create a glass tile finish that shimmers and dazzles pool-goers with its reflective properties. Keep in mind that glass tile is more expensive than stone and porcelain tile.

If the tiles are more than 1 or 2 inches (2.5 or 5.1 cm) across, you may be able to cut them with a score-and-snap tile cutter. Press the cut tiles into place. Make sure that you keep the grouting gaps between the tiles consistent so that they match up with the grouting gaps on the tiles that are already on the wall.

This line will intersect the first line, indicating the exact center of the room. When tiling adjoining rooms, draw your lines so that they run from 1 room to the next. Make sure the line is positioned in the center of both rooms. Use the “3-4-5” method to find the center of irregularly-shaped rooms. Measure and mark 4 feet (1.2 m) outward from the center of the line you drew from the longest wall. Then, make a second mark 3 feet (0.91 m) down along the center of the wall line.

Stretch your tape measure between the 3 ft (0.91 m) mark and the 4 ft (1.2 m) mark. The distance between the 2 marks should be exactly 5 ft (1.5 m). Make a final mark where the tape measure crosses the 4 ft (1.2 m) mark to pinpoint the room’s center.

This method is useful for establishing a starting point in rooms with odd dimensions.

It is the right way to choose the good ceramic tiles

/in /by

Tile is the art of fire and soil, but not everyone knows this art, it is because a lot of people do not understand it, so it makes the ceramic industry terminal misread it, so, tile this thing is really so difficult to understand? In fact, the following is a brief introduction to recognition method by the naked eyes, so that ordinary people can also be a professional tile’s people.

General good tiles in the burning of the raw material in addition to the raw material except the impurities, but also with a high magnetic field bar to remove the iron, so removal of impurities, iron removal is a key step in the tile.
Cheaper ceramic tiles: the color of the back is deeper, the color is uneven, and there are uneven black spots because of removing impurities and removing iron.

Special attention: very white and very cheap floor tiles should be vigilant, because it is possible to add chemical auxiliary materials, zirconium silicate, high purity zirconium silicate without radioactivity, price is also expensive, the general manufacturer, if the addition of high purity zirconium silicate as the raw material, then the price of the production of tiles will not be cheap; also no shortage of manufacturers. Low purity zirconium silicate is used as auxiliary material. Zirconium silicate with low purity contains monazite. Monazite is usually radioactive.

The thickness is an important parameter in the ceramic tile standard, and it is also one of the important reference factors to measure the quality of ceramic floor tiles.
Ceramic rustic tiles are fired by high temperature. The higher the temperature is, the stronger the chemical reaction and physical changes are, so the higher the density of ceramic tiles is. Of course, ceramic tile density is not only related to firing temperature, but also closely related to raw material formula.
In addition to determining the density of ceramic tiles, there is a very important property that is the ability to resist pollution. The lower the water absorption, the better the ability to resist pollution. On the other hand, the higher the water absorption capacity of the ceramic tiles is relatively poor.
The flatness causes the influence: if the tiled level is not good, then the tile will appear uneven after the construction, the concrete performance of the person walking on the tile surface will appear kicking.

The good small ceramic tiles are fine selection and strict control in the formula powder material, select high quality natural stone feed after feeding, and use super large ball mill grinding, and through long time meticulous grinding, select remove impurities, produce nanometer level high purity molecular slurry.
The slurry should be nebulized by intelligent atomization equipment at high temperature to form hollow powder particles. After two purification, it is sent to the raw material bin to carry on the aging. After a series of high standard and high grade process, the final raw material is formed and transported from the conveyor belt to the press workshop.

The factory which makes the ceramic tile has realized the intelligence and automation. The CMF control system is the production system which makes the ceramic tile more widely used. The system can manage the large and complex press powder system well, which is also one of the production system of making the ceramic floor tiles price.
In the use of the press, most ceramic factories are made of ceramic tiles, and the most leading Italy sac press is selected in the world. The super pressure of the press can achieve the perfect suppression of more specifications and sizes of ceramic tiles. The tile billet of high strength press can be pressed to reach the peak level of the gravitational force of the body. The hardness of the tile is hard and hard as hard as it is.

The ultra long granulation equipment and grinding equipment greatly enhance the changeable adaptability of the feeding process, advanced equipment and scientific equipment, greatly improve the production efficiency, and always go ahead of the industry.
The ceramic factory for making ceramic flooring is mostly imported from the Italy sac roller kiln in the kiln, and the new equipment system, such as the non – layer drying kiln and the automatic storage system of Italy Xitie company, is used. The ceramic factory which makes the ceramic tiles is almost harsh to the beautifying of the tile. The first entry is the grinding machine, the multi angle and multi grinding head grinding, the formal polishing after the leveling, the rough throwing, the middle throwing and polishing, and the final display of its diamond and polishing process. After that, the tile is then entered into the fine grinding edge and ultra bright process.
Each piece will be graded according to the size, smoothness and color number. The finished product will be sent to the packaging line for automatic packaging.