This author has yet to write their bio.Meanwhile lets just say that we are proud administrator contributed a whooping 542 entries.
Consider staining the wood if you want it to be more eye-catching. This is a great choice if you’re not going for a natural look or you’re not content with the color of your preferred wood species. Wood stain comes in a wide range of shades. Depending on what shade you use, you can either […]
Scratch the stucco 5 to 10 minutes after applying it. Waiting allows the scratch coat to solidify it a little bit so you don’t accidentally end up scratching the wall underneath it. When you’re ready, get a tool called a scarifier, which looks like a handheld rake or comb. Rake it horizontally across the entire […]
Place vertical boards along the wall to connect the strips. Cut more furring strips to the size you used previously. Line these boards up with the edges of the wall, chalking straight guidelines as needed for the installation. Drill and screw these boards to the cinder blocks. Apply more vertical strips about every 16 in […]
Baseboard is the trim that fits along the floor and makes a transition from floor to wall. It can help hold flooring in place. You may want to install baseboard in a new room or remodeled room or replace damaged baseboard. This is a simple job that most people with a few tools can handle. […]
Choose solid flooring if you want to be able to refinish it in the future. Solid flooring comes in planks made solely of wood. It’s noticeably quieter and can be refinished over and over again since it gives plenty of solid wood to work with. However, solid flooring is also prone to expansion and contraction, […]
Select a type of wood. Different species are of different levels of durability. In general, the harder the wood, the more durable the flooring is. That’s why you should look for harder species if you want your floors to last for years to come. It’s not uncommon for wood to change color over time. Although […]
Measure the width of the wall and cut furring strips to match it. Use a measuring tape to figure out what length the strips need to be. Furring strips are little more than wood boards treated to be water-resistant. They are approximately 2 × 4 × 8 in (5.1 × 10.2 × 20.3 cm) in […]
Cinder block walls are strong and inexpensive, but they aren’t always pleasant to look at. Fortunately, you have many options for improving a cinder block wall. Concrete is an inexpensive way to create a strong cover. Stucco is similar to concrete but more decorative. Vinyl panels and stone veneers are alternative decorations that match with […]
Clean the wall to remove debris and stains. Rinse the wall off with a hose, then sweep away remaining dust and debris with a concrete brush. Spray off stubborn stains with a pressure washer. Strip away any paint on the wall with a pressure washer as well. Another way to remove tough stains is by […]
Wipe away the excess glue. Use a damp rag to blot at the glue squeezing up through the cracks in the newly-repaired gap, then go over the seam until no residue remains. Any adhesive left behind by mistake could dry to a rough texture underfoot or produce mild discoloration in the laminate. If you used […]
Tel: +86-755-29003666
E-mail: barana@baranaceramic.com
