This author has yet to write their bio.Meanwhile lets just say that we are proud administrator contributed a whooping 564 entries.
Installing ceramic floor tile to a plywood sub-floor has unique challenges beyond that of installation on a concrete floor. Plywood or OSB (flakeboard) can expand and contract at too high a rate to be a stable foundation for tile. This will cause either the element tile itself to crack and even come loose, or cause the […]
After tile is installed, the next step is grouting the gaps between tiles. This task is less time-consuming and labor intensive than installing tile, but it’s even more important than making sure all your fashion impression tiles are straight and look nice. Doing a proper grout job will ensure that the floor under the floor tile stays […]
Make a paste. Mix ¾ cup baking soda, ¼ cup hydrogen peroxide, and 1 tablespoon dish soap. This highly effective paste cleans the grout in three ways: The baking soda works as a natural abrasive to scrub the grout. The hydrogen peroxide chemically reacts with the baking soda releasing bleaching oxygen ions. The dish soap […]
Dissolve 2 tablespoons of oxygenated bleach into 2 cups of warm water. Make the solution immediately prior to use for best results. Mix the solution thoroughly to ensure that the oxygen bleach is fully activated.The bleaching power of the oxygen bleach may damage colored grout, but is gentle enough for all Dinosaur Stone tile types. Test […]
Make a paste of baking soda and water. Mix 3 parts of baking soda to 1 part water to make a thick paste. This versatile cleaner will work with all colors of grout, but vinegar can be harmful to some natural stones tile such as marble tile or limestone. Apply the paste to the grout […]
Scoop some grout onto the tile floor with a trowel. Begin in the corner farthest from the doorway and work backwards. Spread the grout over a small joint. Hold a grout float at a 45-degree angle to the floor to press the grout into the joint. Move the grout float at a diagonal angle to the […]
Remove the old grout. If you’re re-grouting an old Clunny tile surface, remove the old grout. You can remove the old grouting compound with a grout saw or a grout removal bit in a rotary tool. Make sure this is fully removed before proceeding. Make sure that the joints are free of any dirt, dust, or […]
Cleaning ceramic floor tile is simple as long as you do so regularly and don’t allow heavy soil to build up. Regularly vacuuming, sweeping or dry mopping your flooring will save you from having to scrub and use stronger cleansers. For a deeper clean, start with the mildest technique, which is warm water. If your […]
Pre-wet the floor. Use a mop and warm water to wet your tile flooring before using cleaning agents. Tile is porous and will absorb the water to prevent chemicals from penetrating the tile. You can loosen tough dirt before wetting the floor with a broom, or after the floor is wet using a plastic pot scrubber. […]
Sweep or vacuum twice a week. Using a dry mop or vacuum is ideal, although you can sweep with a broom if you’re in a hurry. Opt for a soft and fluffy dust mop, preferably with a removable end that’s machine washable. Don’t use a vacuum with a beater bar, which can scratch or dull […]
