This author has yet to write their bio.Meanwhile lets just say that we are proud administrator contributed a whooping 542 entries.
Smooth the cuts with a tile file and wipe the tiles down. Once you’ve finished cutting a tile with the tile nippers, use the tile file to sand down any rough edges along the cut. Follow this up with a damp cloth to wipe away any dust. After this, dry-fit the tile to make sure […]
Use a glass scoring tool to make straight lines. If you plan to make longer, straight cuts on tile 1⁄8 inch (3.2 mm) thick or less, use a glass scoring tool. Scoring refers to cutting small cuts in the surface of the glass that will allow you to break the piece off with a clean […]
Use mosaic nippers to cut small pieces from thin glass tiles. Mosaic nippers are a great tool to use if you want your mosaic to consist of small, irregularly shaped pieces of glass tile. They look like pliers with a sharp clamp tip. For glass tiles, use nippers that have carbide wheels attached to the […]
Homeowners and interior design professional who want a fashion-forward, fresh look select glass tile accents more frequently than ever. Glass tile harmonizes with either traditional, transitional or contemporary architecture, adding a splash of style. For years, glass tile was only used for accent and trim pieces, with ceramic tile filling the field. there was not […]
Since the surface of glass is very smooth, it’s important that the setting materials have a strong bond. Materials with a high polymer content have a high bond strength, ensuring that the glass maintains its spot in the installation. Another installation concern is the glass-making method: small, boutique glass tile makers may not manufacture their […]
A typical ceramic tile installation involves spreading a thin-set mortar on the surface with a notched trowel, then pressing the ceramic tile into the mortar to collapse the ridges and improve contact between the tile and mortar. Unfortunately, this practice can leave many voids in the mortar behind the tile. While this would not be […]
Use an angle grinder to score the circular shape into the tile. Attach a 4 in (10 cm) diamond wheel blade to the grinder, and position it so the circular blade is at roughly a 45-degree angle to the tile. Slowly work your way around the circle traced into the tile, using very light pressure. […]
Score the cut lines with a tile scribe. A tile scribe is a small, sharp hand tool that etches a cut line into the tile. This etching helps make sure the tile snaps where you want it to instead of breaking or cracking elsewhere. The scoring only needs to be 0.125 in (0.32 cm) or […]
Tile the areas away from the toilet flange first. When tiling a bathroom, mark out your desired grid pattern on the floor, and lay tile over the unobstructed areas first. Don’t tile around the toilet flange—the circular piece that connects to the drain pipe and upon which the toilet itself will rest—until the end. Draw […]
If DIY tasks like replacing a toilet and installing a tile floor are within your skill set, then you can also handle tiling around a toilet. Cutting tiles to fit neatly around the base of an installed toilet requires careful template-making and tile-nipping, however, so patience and precision are critical. In most cases, you’ll have […]
Tel: +86-755-29003666
E-mail: barana@baranaceramic.com
