Posts

Attention Should Be Paid To Ceramic Tile Selection

/in /by

1, look at product packaging. Ceramic tiles are usually packed in cartons. The name of the product and the product must be printed on the package. Trademark specification, size grade, color number, etc.. Some of them are labeled with ISO9000 quality system certification. The product qualification certificate should also be placed in the packing box. In the purchase of tiles, must choose complete identification, clear products, especially to pay attention to the selected ceramic tile and packaging box logo specifications, color number is consistent.

2, look at the appearance of the product. From the box any checks several tiles, see the product surface had the following defects: lack of glaze, spots, crack, bump, bubble, peeling edge, corrugated and so on. Generally from the porcelain 3M visual inspection, the defect is not obvious, does not affect the use of qualified products. Each ceramic tile has a product mark on its back, and it is not allowed to adhere to the sides and back of the glaze and other obvious failures that affect its use.

3, see color difference. Due to the large number of tiles purchased, if there is a significant color difference, the decoration effect is very affected, to all packaging products sampling contrast, observe the change of color difference, color difference can not choose. Also should pay attention to each box of ceramic tile color is consistent, whether or not chromatic aberration.

4, listen to tile sound. How to distinguish the inner quality of ceramic tile is not to be seen. It can be distinguished by sound.The method is: each hand holding a tile, with a brick corner gently hit the brick surface of another brick, the sound is loud and clear

5. Look at the size. One by one inspection, size error greater than 0.5MM, flatness is greater than 0.1MM products, not only will increase the difficulty of construction, but also after the decoration effect is poor, can not be used for engineering.

Tips: How To Clean The Tiles?

/in /by

Method one : Brush by brush and brush

Toothbrushes and brushes are more common, and they are also the most practical tools for cleaning tiles, cracks and dirt. In the first place of ceramic tile aperture, using a toothbrush dipped in a small amount of detergent paste brush slot in the dirt, and then use the brush brush waterproofing agent in the crevice with a can, this method can not only prevent seepage, and can prevent the growth of mold.

Applies to: kitchen floors and walls, bathrooms, walls and floors, living room floor tiles.

Method two : Waxing clean

Wholesale tile floor waxing can effectively maintain the ground to tile waxing, also has a bright and clean effect to keep tile. First of all tile stains completely clean, such as plastic or stains, available neutral detergent or 100 clean cloth wipe. The first floor cleaning agent onto the tile, then water poured into a clean dry mop wax, wax evenly coated on the ceramic tile can be. After waxing let tile surface dry, dry to stampede.
Here to remind, many times after waxing tile surface will turn yellow, need to re waxing, wax removing agent treatment. The specific method is: wax removing agent used directly, without water, even then, about 15 minutes or so, wax removing agent into the tile, tile water will be wet, completely remove wax, wax or re not shiny. After removing the wax, please clean it according to the above procedures.

Applies to: kitchen and living room floor.

Method three : Steam fumigation

The oil is not cleaned for a long time, even if the product in the plane is difficult to clean, especially the gap in the kitchen grease, steel ball, cleaning agent…… Is not the most effective method, not only laborious and ineffective against oil pollution, kitchen tile gap, the best way is to use steam. As long as the kitchen tiles are heated in large pots in the kitchen, the walls are steamed by steam, and the oil can easily fall off naturally after being fumigated.

Suitable for: kitchen wall.