Posts

How Using Baking Soda Paste Clean Grout

/in /by

Make a baking soda paste. Combine about two tablespoons of baking soda with about one tablespoon (15 milliliters) of water. The mixture should not be too thin. If it sloshes about in the bowl you mixed it in, add some more baking soda to help it achieve a more paste-like texture. It also shouldn’t be too thick. If the mixture is thick and dry, and doesn’t adhere well to the fork or spoon you use to mix it, add some water to thin it out.


The more grout you have to clean, the more paste you’ll need. Apply the paste to the grout. The easiest way to apply the paste to the grout is with your finger. Simply scoop a little dollop of the paste onto your finger tip and smear it in an even layer across the grout you wish to clean.


Mix water and vinegar. In a spray bottle, combine water and vinegar in a one-to-one ratio. For instance, you might combine 1.5 cups (354 milliliters) vinegar with 1.5 cups (354 milliliters) water. To prevent grout from accumulating grime in the shower, just spray this mixture onto the shower grout two or three times weekly after getting out of the shower.


Spray the mixture onto the paste. Point the nozzle of the spray bottle toward the baking soda paste you’ve smeared along the grout. Squeeze the handle of the bottle. Repeat as necessary until all of the paste has bubbled up somewhat. You may have to wait about five minutes for the vinegar and baking soda to react.


Scrub the grout. Once the paste has become fizzy with the application of the vinegar mixture, use a stiff-bristled toothbrush to scrub the grout clean. Use a toothbrush you aren’t planning on using again for anything but detail cleaning.

Tips: How To Clean The Tiles?

/in /by

Method one : Brush by brush and brush

Toothbrushes and brushes are more common, and they are also the most practical tools for cleaning tiles, cracks and dirt. In the first place of ceramic tile aperture, using a toothbrush dipped in a small amount of detergent paste brush slot in the dirt, and then use the brush brush waterproofing agent in the crevice with a can, this method can not only prevent seepage, and can prevent the growth of mold.

Applies to: kitchen floors and walls, bathrooms, walls and floors, living room floor tiles.

Method two : Waxing clean

Wholesale tile floor waxing can effectively maintain the ground to tile waxing, also has a bright and clean effect to keep tile. First of all tile stains completely clean, such as plastic or stains, available neutral detergent or 100 clean cloth wipe. The first floor cleaning agent onto the tile, then water poured into a clean dry mop wax, wax evenly coated on the ceramic tile can be. After waxing let tile surface dry, dry to stampede.
Here to remind, many times after waxing tile surface will turn yellow, need to re waxing, wax removing agent treatment. The specific method is: wax removing agent used directly, without water, even then, about 15 minutes or so, wax removing agent into the tile, tile water will be wet, completely remove wax, wax or re not shiny. After removing the wax, please clean it according to the above procedures.

Applies to: kitchen and living room floor.

Method three : Steam fumigation

The oil is not cleaned for a long time, even if the product in the plane is difficult to clean, especially the gap in the kitchen grease, steel ball, cleaning agent…… Is not the most effective method, not only laborious and ineffective against oil pollution, kitchen tile gap, the best way is to use steam. As long as the kitchen tiles are heated in large pots in the kitchen, the walls are steamed by steam, and the oil can easily fall off naturally after being fumigated.

Suitable for: kitchen wall.