Posts

How Cleaning Exterior Surfaces?

/in /by

Sweep off the surface. Remove any loose debris from the outdoor surface you are cleaning. If you are cleaning off a patio, use a large broom to sweep it off. If you are cleaning a small retaining wall or a monument, use a small broom to sweep the detailed areas. Removing the top layer of dirt and debris this way will help you assess what areas need to be deep cleaned and which just need a light scrubbing.


Wet the surface and allow the water to sit for about 30 minutes. Spray the surface with your hose so that it is all damp. A layer of water will start to loosen anything growing on the surface. Wait for the stone to soak for about 30 minutes before continuing on and your overall cleaning process will be much easier.


Tip: If the temperature is below freezing, wait for it to warm up before putting water on your sandstone tiles. Purposely putting water on sandstone tiles, especially older sandstone tiles that might have tiny cracks in it, can cause the stone to crack if water gets inside of it and freezes.


Scrub the surface with water and a plastic-bristle brush. Use a circular motion while scrubbing to get any organic material off of the stone. This often includes moss, lichen, and mold. Keep scrubbing until you are happy with the color of the stone. Most outdoor scrub brushes will work for fine for this. You can use a hand brush or a brush on a pole.


Just make sure that bristles are medium-firm, meaning that they bend when you push the brush across the surface. Never use a wire brush or extremely firm plastic-bristle brush on sandstone tiles. It will scratch the surface and speed up decay. Use a squirt of dish-washing soap, if necessary.

How to Install New Baseboard?

/in /by


Baseboard is the trim that fits along the floor and makes a transition from floor to wall. It can help hold flooring in place. You may want to install baseboard in a new room or remodeled room or replace damaged baseboard. This is a simple job that most people with a few tools can handle.


Remove the old baseboard if it exists. Pry off the old baseboard carefully with a small pry bar so you can use it to mark and cut the new molding. Protect the wall as you pry off old molding so it won’t be damaged. Use a piece of scrap wood between the wall and the pry bar. You may be able to cut off damaged areas of molding and re-use part of the old molding.


Remove any nails that pull through the old molding and are left in the wall. Measure, mark and cut the new molding. Using the old molding to make a template for corner cuts and cuts around outlets or other obstructions is ideal. Make a template out of stiff paper or cardboard for difficult cuts if there is no old molding.


Molding pieces should end at a wall stud. Try to cut pieces so that you join two pieces at a wall stud. Allow for the depth of both pieces of the molding when butting two pieces together at a corner. If you have a miter box you can miter the corners (cut at an angle) so they fit together neatly. Make sure cuts where molding will meet another piece in a line are perfectly straight to avoid gaps between pieces.


Fit the molding pieces in place and adjust if needed. Make sure any flooring and wall coverings such as wallpaper or paneling are in place and any painting is done before installing the molding. Work with one wall at a time. Start at one corner and fit all the pieces in place.

How Using Concrete?

/in /by


Clean debris off the wall with water and a sprayer. Remove as much debris as possible from the wall so the concrete bonds cleanly to it. Spray away most debris with water from a garden hose. Also, try mixing 1 cup (240 mL) of a mild dish soap into about 5 US gal (19,000 mL) of hot water to scrub off tough stains with a concrete brush.


Use a power washer for extra cleaning power. If you don’t own one, see if your local hardware store has one to rent. For tough stains you can’t quite remove by hand, mix 1 cup (240 mL) of trisodium phosphate in about 1 US gal (3,800 mL) of water. Scrub it into the stains with a brush before rinsing it off with clean water.


The chemical is strong, so cover up with long-sleeved clothing, gloves, goggles, and a respirator mask. Mix surface bonding cement with water to a pasty consistency. The easiest product to use on a cinder block wall is surface bonding cement. All you have to do is pour the cement into a container such as a wheelbarrow, then stir in the water with a shovel.


You need approximately 4 cups (950 mL) of water for an 80 lb (36 kg) bag of cement mix. Shop online or visit your nearest home improvement store for cement and all the tools you need to apply it. With surface bonding cement, you don’t need to apply a concrete bonding adhesive.


If you wish to use another type of cement or concrete, also get a bag of adhesive. Mix it with water and spread it on the wall first. Wet a section of the wall again to prepare it to bond with the cement. Spray the entire wall thoroughly with water from a garden hose. Then, go back to a section of the wall to work on first. Spray it once again with water.

How Removing Tough Stains For Granite Tiles?

/in /by

Employ a granite-safe cleaning solution for more difficult jobs. If your floor is very dirty or has not been washed in a long time, it can be helpful to use a granite-safe cleaning solution, such as Method Granite Cleaner Spray or Weiman Granite Cleaner. Never use “all-purpose” household cleaning products on granite.

Ventilate the area. If you choose to clean your granite with a store-bought granite solution, it likely will give off fumes from the chemicals. Open a window to maintain better airflow while you work. Spray the cleaner on one barana tile at a time, wiping with a soft cloth. If you spray on many tiles at once and the solution is left standing, it may stain your granite. Dry thoroughly with a soft cloth to minimize water stains.

Try a baking soda poultice on deep stains. For deep or set-in stains, apply a poultice to draw the stain out of the stone. Mix baking soda and water until the mixture has the consistency of sour cream. Spread the paste on the stain and cover with plastic wrap. Leave it covered for 24 hours.After 24 hours, wash the paste off as you would normally clean your granite tiles, with soap and warm water.

Clean grout with a granite-safe choice. Grout is a magnet for dirt and dust. If dirty grout is making your polished tiles appear less clean, seek out a granite-safe grout cleaner, such as Granite Gold Grout Cleaner or Tile Lab Grout Cleaner. Many normal grout formulas are abrasive and will damage your granite tile.

Use a toothbrush or other small brush to clean the grout between your granite tiles. This will ensure the grout cleaner is applied in a more targeted manner. Always avoid using harsh scrubbers of any kind on your granite tile.

How Doing Routine Cleaning For Granite Tiles?

/in /by

Wipe the area with a dry mop or duster. Before you begin cleaning your granite tile, it is important to remove surface dirt. Doing this will keep any bits of grit or grout from scratching your granite, which can trap bits of dirt deep in the stone and dull its finish.

Use warm distilled water and mild dish soap. If your granite is just a little dirty, first try cleaning it with warm distilled water and some mild dish soap. Dilute a few drops of the soap in a bucket of water, wringing a soft cloth to remove excess water before each wipe of the granite tile. Standing water can stain granite if left too long.

Avoid soaps with lots of dyes and fragrances. Dyes can stain light colored granite. Microfiber cloths you can buy at the hardware store specifically designed for stone are best. Don’t ever use anything abrasive such as scrubbing sponges or steel wool to clean granite. Though the stone is durable, it is vulnerable to scratching.

Work in a methodical way so you don’t miss any spots. For example, you could clean all the tiles left to right in one row before moving to the next. If your granite tiles are on the floor, be sure not to clean yourself into a corner.

Dry the granite thoroughly to avoid water spots. Use circular motions to dry, as if buffing a car. If you don’t have a soft cloth, you can use an old T-shirt without screen prints.

What is the marble tile of the full body?

/in /by

The full body marble tile is the upgrading product of marble tiles with large tile body and surface texture and color. On the full body marble tile, the color, texture and function of the full body tiles are infinitely close to the qualitative effect of the natural stone layer, and the texture is penetrating and stronger. The entire tile’s body can achieve perfect texture from any angle and any cutting method. It can achieve real texture and high-end atmosphere.

First. What is the faux marble tile of the body?
The full body marble tile is the upgrading product of natural marble with large ceramic tile body and surface texture and color. The appearance of natural stone is consistent with the inner billet, but the effect of traditional marble tile is very difficult to achieve this. Thus, in the process of deep processing, the internal different colors of the body can be clearly seen in the process of processing, such as slots, chamfering, arc and so on. It looks very incongruous with the effect of the glaze surface of the tiles. It’s a pity. And the process and system of making marble tiles is to improve this problem. It is necessary to make the color and texture of the body close to the surface effect, even in the same way.

Second. The advantage of full body marble ceramic tiles
1.Full body marble tile on the tile body, the color, texture, function infinitely approach the qualitative effect of the natural stone rock formation, the texture is more transparent.
2.The combination of the full body three-dimensional fabric and the color-mixing and coloring process enables the entire body-to-surface glaze layer of the ceramic marble body to be exactly the same. The entire brick body can achieve the perfect texture rendering effect from any angle and any cutting method, so that the true texture body can be achieved.
3.Full body marble floor tile products are pressed and formed at a high tonnage press and fired at high temperature. The finished tiles are more delicate in color and have higher performance and quality.
4.The appearance of the natural stone is consistent with that of the inner slab. The full body marble tiles restore the natural precious stones and bring the distance between the marble tile and the natural marble products closer.
5.Tile blanks are full of changing textures, and products and spaces are full of soul. Not only do designers like it, but the effect is natural, elegant, and more satisfying to consumers’ needs.

Third, the full body marble tiles decorative effect
Full body marble tiles have the same characteristics as the surface, so it is suitable for all kinds of wall surfaces such as wall surfaces, curtain walls, etc.
Full body marble tiles are multi-faceted with heavy texture, especially suitable for larger residential or high-end commercial spaces. Full body marble tiles have been applied in villas, high-end hotels, restaurants, clubs and other high-end places.

The Origin Of Antique Tiles

/in /by

Antique tiles evolved from glazed tiles and glazed ceramic tile is in essence. Compared with the ordinary glazed tile, the differences are mainly shown above in the glaze color, antique tiles belong to ordinary ceramic tile, and the disk is basically the same; the only difference is in the firing process, antique wall technical content is relatively high, and through many kinds of production processes, with high strength, waterproof, anti-skid, corrosion resistance and easy cleaning features.

What is called “antique” refers to the color, pattern and effect of wall tiles. Antique wall pattern with wood, imitation stone, imitation leather; there are imitation plants flowers, geometric patterns, imitation imitation fabric, imitation wallpaper, imitation metal etc.. After firing, the pattern can be soft cast, half cast and full cast. The design patterns and colors of antique wall tiles are the most colorful of all ceramic glazed tiles.

Antique wall to calm, elegant, simple, natural, quiet beauty, the antique wall inside the building in reincarnation people into another old world and memories.