Posts

How Removing Stains?

/in /by


Test cleaners in an inconspicuous area first. No matter what cleaner you’re using, it’s always a good idea to test it first, particularly with stronger cleaners. Put a little cleaner on the stone in a spot that’s out of the way. Leave it on for 5-10 minutes to see if it affects the Bluestone tiles.


If the cleaner causes a change in the stone color (after it dries), you shouldn’t use it on the stone. Be aware, though, that just lifting the grime off the stone can affect the color, so make sure it’s the actual stone that’s changing color. Apply an oxidizing cleaner to mold and mildew. Put on gloves and eye protection. Mix the cleaner into a bucket of water according to the package’s instructions.


Use a scrubbing brush to apply the cleaner to the surface, moving it back and forth to thoroughly cleanse the area. You can apply a lot of pressure to Bluestone tiles, so don’t worry about harming it. Leave the cleaner on for at least 12-15 minutes. When you’re done, make sure to rinse the area thoroughly.


Oxidizers work by adding oxygen to the area, removing stains and grime. Bleach is an oxidizer, but many other cleaners are oxidizers, too, which is actually an oxygen bleach cleaner. Don’t use this cleaner in direct sunlight, as it may evaporate before it can work. Pick a cleaner like Stain Solver for this purpose.


Try ammonia, bleach, or hydrogen peroxide for algae or mildew. Mix 0.5 cups (120 mL) of your chosen cleaner into 1 gallon (3.8 L) of warm water. Apply the cleaner with a scrubbing brush to the soiled area and let it sit for 5-10 minutes. Thoroughly rinse the area when you’re done. Never mix ammonia and bleach, as the solution creates toxic gases!

How Cleaning Grout with a Steam Cleaner?

/in /by

After tile is installed, the next step is grouting the gaps between tiles. This task is less time-consuming and labor intensive than installing tile, but it’s even more important than making sure all your fashion impression tiles are straight and look nice. Doing a proper grout job will ensure that the floor under the floor tile stays safe from moisture. You will still be working on your knees for an extended period of time, so it’s not a job to take lightly.

Rent or purchase a steam cleaner. Steam cleaners can effectively clean and sanitize all types of cement tiles and grouts as there are no chemicals involved. Visit your local home improvement store to find a machine to rent or buy. Make sure that the steam cleaner you acquire has the proper attachments for cleaning grout: Steam hose, Small brush attachment

Even after mopping, wood marble tile floors with dirty grout will still look messy. Fortunately, you can easily clean grout using simple household products so your tiles look brand new again. Follow the manufacturer’s directions to assemble and fill the steam cleaner. Read the directions carefully to avoid damaging the equipment. Fill the reservoir with clean water to the fill line according to the manual’s instructions. Do not add chemicals or soaps to the steam cleaner water reservoir.

Turn the steam cleaner on and allow it to heat up. The steam cleaner’s instruction manual will advise you on how long to wait after turning on the machine before cleaning. Move the cleaning brush back and forth over the grout. Start at one side of the room and work your way towards the other end of the room. The steam will lift the dirt and grime from the grout and also kill any mildew that may be present.

Use a towel or mop to wipe up the excess moisture after cleaning. Be careful as the floor may be slippery after the steam condenses into water. NOTE: Steam cleaning will remove all grout sealant, so only use a steam cleaner if your grout is unsealed or if the sealant is old and you are ready to remove it.

How Using Vinegar and Ammonia to Clean Ceramic Tile Grout?

/in /by

Do a preliminary clean. Before you get down to the deep cleaning methods, it is necessary to do a regular clean up of your rustic tile. Follow your regular cleaning process of wiping down counters or sweeping and mopping floors. This will get all the top layer of scum off, and make your work a bit easier.

Create your solution. In a bucket or large bowl, mix 7 cups of warm water, 1/2 cup of baking soda, 1/3 cup of ammonia, and 1/4 cup of white vinegar. Allow all the ingredients to mix completely, so the baking soda is dissolved. Pour the mixture in a spray bottle. Keeping this in a spray bottle will make it easy to mist the dirtiest areas specifically, and for storage. Fill your spray bottle completely, and then shake the solution well.

Spray the grout. Start on a small area, only as large as 1-2 square feet total. Spray your cleaning solution over the grout so it is dampened. Allow the mixture to set for 3-5 minutes to work into the grout. Begin scrubbing. Use a scrubbing brush of your choice – a hard bristled cleaning brush, a toothbrush, or a magic eraser are all good options. Put some hard work into your scrubbing to get the ground-in dirt out from between your wood tiles.

Interior of a new modern apartment in scandinavian style with kitchen and living room

Clean up the dirty liquid. All your scrubbing has probably created little pools of dirty liquid on your tiles. Use a damp cloth to wipe this up, and wring it out into a separate container. This will keep your polished tiles cleaner in the end. Complete your grout cleaning. Use the above process to move onto the rest of your grout, giving all it a thorough cleaning. Focus on simply getting the dirt and dark areas out of your grout, exposing the natural white underneath.

Do a final wipe-down. When you are convinced your grout cleaning is finished, do a second clean up of the entire area. If you were working on counters or in a bathroom, use a generic cleaning spray and rag to wipe down your marble tiles. For floors, go ahead, mop your tiles again, and towel dry.