Posts

What are the problems that need to be paid attention to in the process of tile paving?

/in /by

Do not know what is the reason, many people like to mix the ceramic tile and cement, perhaps because the ceramic tile is more expensive, but the ordinary cement tiles mortar is worried about the sticky, so the ceramic tile is added to the cement mortar and stirred in the mortar. Many people think that ceramic tile glue is almost the same as cement, so mixing it together is no problem. Actually, the ceramic tile glue has its own formula, but when the ceramic tile designs glue and cement sand mix together, the performance of the ceramic tile glue is greatly reduced. If cement mortar has better water retention and better placement, it is recommended to add cement paste to the cement.

Ceramic tiles shop can not be perfect each batch, there will always be a variety of problems, it is suggested that in the process of paving, find problems in time to remind the business of quality or color difference and other problems, timely consultation and solution. It is suggested that the owner inform the constructor before construction: if there are any problems found in the construction, we should timely feedback, so that we can deal with them in time and avoid many problems. In the process of paving, it is found that the tiles have problems, such as the size specification, the ceramic tile price and so on, and the construction should be taken out as far as possible. It can cut small pieces and splice into mosaic use.

Because of the cause of heat expansion and contraction, the ceramic floor tile does not leave the seam, it affects the service life of the tile, and does not leave the seam. The tile will squeeze each other, causing the problems of the glaze crack, the arch, the empty drum, the falling off and so on. Therefore, whether the tiles are plaster or the “seamless tiles” currently mentioned in the market, both of them need to be sewn. The specific width of the stitch should be communicated with the owner before the tile is padded. In order to be more intuitive, the owner can see how good the stitch is when it is decorated.

In the course of laying, tiles are unavoidable to be machined, and when corner paving is applied, they should also be chamfered and collaged. In the collage of Yang Jiao, be careful when chamfering, and try not to damage the glaze. It is best to let merchants or owners get a large processing plant cut. If you are in a hurry, we recommend using some portable electric cutting machines.

This problem is often ignored. When tiles are put up, everyone is careful. Once the brick is put up, many people don’t notice. So, many people stir the cement, move back and forth on the brick, and some tools pull back and forth.In particular, some processes such as paints, coatings, carpentry and so on are laid behind the tiles.Therefore, the laying of good tiles should be covered with protective film, and it is required to lay a good paste for at least 24 hours or more before walking on it.
In order to improve the effect of ceramic tile and stone placement, it is generally preferred to use beautiful sewing technology. The gap is not yellow, moldy, and easier to clean.It should be noted that the stitch should be done as soon as the ceramic tiles are dry. To prevent the ceramic tiles in kitchen from being dry, the construction on the surface of the tiles will cause the loosening of the tiles, leaving the hidden danger of hollowing out.

Home decorate, recognize these sizes of the tiles

/in /by

As we all know, tile is the best building decoration material, its stable physical and chemical properties are also very worthy of praise, but for many owners who want to use ceramic tiles, they are often faced with a great variety of tile products. So, for the owners who want to use tile, what do they care about most, the size of tile should be their most concerned, because the size of the ceramic tile will eventually affect the construction cost of the later tiles, the size of ceramic tiles is too big or too small, it will increase the cost of tile paving and the size of ceramic tiles is too big for the professional. The standardized paving requirements are higher and more strict, and the size of ceramic tiles is too small, which will greatly increase the construction time of the builders on the tiles, which leads to the higher cost of the construction.

800 * 800mm specifications of ceramic floor tiles have always been the highest frequency of use, which is beyond doubt, and is obvious to all. At the same time, we are most common in this size of ceramic bath tile. This size of ceramic tiles is the most mature and stable in all aspects of technical parameters control because of the use of all manufacturers. The size of the specification size, 800 * 800mm sizes of ceramic tiles are currently the most widely used, its position is not subversive, as for the construction paving, at the present stage of the tile workers, the 800 * 800mm specifications of the tile construction paving is the most skilled.

600 * 600mm sizes of tiles have an irreplaceable importance in the application of the whole space. The use of this size ceramic tile in small space can greatly reduce the loss rate of the tile in the process of paving, so the size of the tile has its unique complementarity and the performance of the more ceramic tiles in the construction. More flexible.

When it comes to the 300 * 600mm price ceramic tile, I believe that many people first impression will think of marble porcelain tiles, that is, inner wall tiles. It is true that the application of the 300 * 600mm tiles and wall surface is very widespread and common. At the same time, many building walls are basically used in the daily life of the tiles, compared to the larger specifications. For ceramic tiles, the construction of 300 * 600mm on the wall is much simpler.

400 * 800mm of this size, the application of the wall tiles is the extension and supplement to the 300 * 600mm specifications. The application on the ground is the filling of square size tiles, and because of its 1:2 ratio, the application ground can greatly enhance the three-dimensional sense of the whole space. It is also convenient in the construction and paving, and there is not too much requirement.

For 300 * 300mm specifications of small ceramic tiles, in small space application is very extensive, such as: toilet, balcony, kitchen is usually use this size of ceramic tiles, but also because of the flexibility of its specifications, in small space paving construction is more convenient, can change more.

600 * 1200mm size of ceramic tiles discount, in large space and large scope application of its effect is very shocking, while the length of the size is also more solid, the proposed pursuit of fashion, front style decoration owners can refer to the construction, because its long bar in the placement of attention to the tiles and tiles must pay attention to the level title At the same time, adequate tiles should be reserved, and 2-4mm tiles should be reserved.

150 x 900mm specifications, the size of this type of tile is mostly wood grain tiles, and more is applied to the bedroom, study, restaurant, or other applications. If you want to use this type of ceramic tile, then the whole space will take some thoughts to conceive the collocation, but it is the best choice for the owners who like the wood grain.

600 x 900mm size tiles are between rectangular and square, well compatible with the rectangular size and square size of their advantages, convenient for construction and paving, and also a strong sense of stereoscopic.