Posts

How to Clean Quartz Tiles?

/in /by

Quartz is a popular material for kitchen tiles and tables. It’s scratch-resistant, antimicrobial, and easy to clean. However, it’s not stain-proof or scratch-proof. Whether you have a quartz tiles or are thinking of installing one, you’ll need to know how to safely perform daily cleanings, tackle stains, do twice-yearly deep cleanings, and make a poultice for especially tough stains.


Wipe down the tiles. Use a clean soft cloth to avoid scratching the surface. Mix equal parts warm water and dish washing liquid. Dip the cloth in the soapy water and wring out the excess. Wipe the surface using gentle counterclockwise strokes. Dry the surface with a clean nonabrasive cloth. Even if you don’t soil the tiles, wipe it down every day to keep it in good repair.


Fight grease with degreasing cleaner. You can buy this product in grocery stores or big box stores. Stick to a product labeled safe for quartz surfaces. Spray the cleaner on a clean nonabrasive cloth. Clean the tiles in a gentle counterclockwise motion. Rinse the surface immediately. As an alternative, you can use disinfectant wipes that don’t contain bleach.


Scrape away hardened spills. This includes egg, nail polish, and similar substances. Use a blunt plastic scraper to tackle these substances. Aim for the underside of the mess, scraping away from your body. Use warm water before anything else. Soak a clean nonabrasive cloth with warm water. Wipe the stain in a gentle counterclockwise motion. Use a clean soft cloth to dry the affected area.


Remove permanent marker with rubbing alcohol. If warm water doesn’t work, wet a cotton ball with isopropyl (rubbing) alcohol. Rub the stain in a gentle counterclockwise motion until the stain disappears. Dry the area with a clean soft cloth. Tackle wine with a magic eraser. Wet the magic eraser under a stream of warm water.

How Removing Stains?

/in /by

Use bleach, hydrogen peroxide, or rubbing alcohol on blood stains. Blood stains can be removed by dipping a dishcloth or sponge into a solution with ratio 1:49 bleach to water. For instance, concoct a mixture of 2 teaspoons (9.9 ml) bleach and 1⁄2 US quart (0.47 L) of water. Alternately, dampen a dishcloth or sponge with hydrogen peroxide. Dab the stain lightly until it is gone. Using rubbing alcohol will also disinfect your stains.

Eliminate organic growth using bleach. To rid your ceramic tile of mold or mildew, mix a solution of ratio 1:49 bleach to water. For instance, use 2 teaspoons (9.9 ml) of bleach and 1⁄2 US quart (0.47 L)) of water.

Remove coffee, tea, or juice stains with chemical cleaners. Wash the ceramic tile with dish soap and hot water. Remove the leftover discoloration with either a solution of 2 teaspoons (9.9 ml) of bleach and 1 US quart (0.95 L) of water, or with hydrogen peroxide.

Use ice on gum, tar, or wax stains. Place some ice cubes in a resealable plastic bag. Place the bag over the sticky stain marring your ceramic tile. After five to ten minutes, check the consistency of the stain. It should be frozen. Scrape away as much as possible, and wipe the rest off with paint thinner.

Use club soda on grease stains. If you’re trying to remove a stain of oil or grease, wet a dish rag with club soda. Rub the stain using a gentle circular motion. If you don’t have club soda, you could simply use a nonabrasive floor cleaner.

Use bleach on ink. Ink or dye stains require treatment with bleach. Soak a clean dishcloth with bleach. Lay the cloth over the stain. Check it every 60 seconds or so until the stain disappears. Don’t leave the bleach-soaked cloth on the ceramic tile too long. The alkali in the bleach can cause whitish water-soluble salts to collect on the marble tile.