Posts

How Using Wood Wax or Polish?

Apply an oil based polish. Use only mineral oil or lemon oil to polish the wood walls. Do not use food based oils like olive oil or coconut oil, as they will oxidize and start to smell over time. You can get mineral oil and lemon oil at your local hardware store or online. Apply the oil to the wood with a clean, dry cloth to remove dirt and give the wood a nice glow.


You can also buy an oil based polish that is made of only mineral oil online or at your local hardware store. Use a liquid wax. Wood wax is a good option for cleaning dirt and dust off the wood walls. It will also protect the wood and give it a nice sheen. You can buy wood wax in liquid form online or at your local hardware store. Use a clean microfiber pad or cloth to apply one coat of the wax over the wood walls. Apply the wax with the grain of the wood. It should dry quickly.


You can then apply another coat if you want to increase the sheen or glow of the wood. You may want to use a dry cloth to remove surface dirt or dust before you apply the liquid wax to the wood walls. Try a paste wax. Wood wax also comes in a paste, which you can apply directly to the wood walls. Paste waxes provide long lasting protection for wood.


It will leave a hard, shiny finish to the wood to protect it from dust and dirt. Look for paste wax online or at your local hardware store. Apply one coat of the paste wax to the wood walls using a clean, dry cloth. Always apply it with the grain of the wood. Then, apply another coat if you want a shinier finish to the wood.


Let the floor air dry. Stay off the floor until it’s completely dry. Most floors will air dry on their own. You do not need to wipe up liquid with a rag or towel. Some floors, however, should never have water sitting on them. If your floor’s manufacturer’s instructions indicate they should always be free of water, pat these floors dry with paper towels.

How To Buy Tile With Value For Money?

First, look at the appearance. Tile color should be uniform, surface smoothness and smoothness is good, the surrounding rules, patterns intact, from a box of four or five pieces, to see whether there is color, deformation, lack of edges, less angle and other defects. In the distance of 1 meters, with the naked eye to observe the ceramic tile surface has no pinhole, if there is, indicating that the glaze is not completely fused, it is easy to accumulate dirt. All superior and qualified products require that at least 95% of the tiles in this distance “vertically observe the surface without defects.”. Observe warped (bending) curvature. To carefully observe the surface smooth degree, if Alice (bending). The situation is serious, it will affect the firm after the day.

Two. Listen to the sound. With a hard object tip, the sound is more crisp, the higher the degree of porcelain, the better the quality. Can the left thumb, forefinger and middle finger clip tile corner, easy to hang, with the lower right index finger and tap the tiles, such as voice clear and sweet for the top grade, such as sound dull and sluggish muddy beneath contempt.

Three, observe its hardness, ceramic tile with good hardness, toughness, not brittle rotten as the top grade. Scratch the edges and corners of the ceramic tiles to see if there are scratches. If there is, it means that the glaze is poor, the surface glaze is polished, once the brick surface is dirty, it will be difficult to clean.

Four. Drop test. Drop a few drops of tea juice or water on the back of the ceramic tile. After a few minutes, the quality of the water will be better if the water absorption is not diffused or the water absorption rate is low.