Posts

How Attaching Your marble tiles?

Install your kitchen sink if necessary. If you had to remove your kitchen sink when removing your old marble tiles, be sure to reinstall it before adding the new material. Start by following manufacturer’s directions to install the faucet followed by detergent and dispenser mounts. Now, attach the sink, supply lines, and drain pipes.


Always apply a ribbon of plumber’s putty before installing the faucet and sprayer bases. Use caulk to attach the sink rim to its opening. Seal the drain and tailpipe with caulk or with a gasket—whichever the manufacturer recommends. Be sure to turn your water on and check for leaks before installing your marble tiles.


Stick painter’s tape to the top edges of the cabinets for protection. Try to cover at least the top 1 inch (2.5 cm) of the cabinets, although the more the better. This will ensure that no silicone adhesive touches their faces. Purchase painter’s tape from any home hardware store or online supplier.


Install ledgers in areas of low cabinet support. While marble tiles can be placed directly on top of cabinets, their weight shouldn’t be underestimated. Take a look at your tiles design and look for areas that have the least amount of cabinet support. Now, install 1 to 2 inch (2.5 to 5.1 cm) ledgers into the walls on the sides of the cabinets to add support.


Attach each ledger using an electric drill and the screws provided. Purchase ledgers from home hardware stores. Be sure to take measurements of the areas that need ledgers before purchasing any. Apply silicone adhesive beads to the top of the cabinets. Start by applying a 2 to 3 inch (5.1 to 7.6 cm) thick bead of adhesive to a corner and then working your way around the top of each cabinet.

How to Select Wood Flooring


If you choose it right, your wood flooring will last you for years to come. Decorating your home will be a lot easier as well, since beautiful floors make for an excellent base for truly outstanding interior design. By learning how to decide between different types of wood flooring and how to adjust the final touches to match your decor, make sure you choose the best option for your home.


Look for labels on the nail slots in each panel. These slots are often marked with letters to help installers line up rows of panels properly. The vinyl panels are pretty thin, so don’t put the nails in too tightly. Pound the nails in so they’re about even with the upper lip of each panel. That way, the panels can expand and contract as the weather changes.


Attach a top strip to prevent water from seeping behind the vinyl. Use a snap-lock tool to punch a hole every 16 in (41 cm) over the upper furring strip. Set a vinyl strip or J-channel over the strip. Grip the strip between tin snips to guide it onto the vinyl panels. Secure it in place with more galvanized siding nails.


These are the only nails visible in the siding. Consider adding some primer and then painting over them with water-resistant latex paint. Keep the layer of mortar the same depth throughout the wall so the stone veneer fits evenly on the wall. Consider scratching the mortar with a scarifier, a metal rake, or another tool to improve the finished bonding.


Arrange the stone panels on the ground in front of the wall. The panels fit together like puzzle pieces, but you have to assemble them first to ensure they go together. Spread them out face down on the ground and push the pieces as close together as possible to eliminate gaps. Create the finished pattern you want your wall to have.

How to Do Tile Painting?

Many people believe that the only way to color a tile is to glaze it in a kiln, but you can actually paint tile yourself at home! If you do the right prep work, it’s a quick, easy task that will let you re-color your flooring or bathroom, or even add a decorative element to your floors, counters, or mantel. Learning how to choose the right supplies, prepare your tile for painting, and paint and seal your wood tile correctly will help you re-do your home quickly and inexpensively.

Use bleach or hydrogen peroxide to remove any mold. Vinegar works well for removing soap scum and shower residue. Sand your vatican tile with 1800-grit paper until it’s no longer smooth. You won’t need to sand unglazed tile, but any ceramic that has already been glazed will need to be sanded to provide a rough surface for the paint to adhere to. Use 1800-grit sandpaper to smooth the tile and remove uneven gloss.

Wipe off the dust with a damp rag. Sanding creates a lot of dust, and it will affect the look of your paint. Make sure all of the dust from sanding is gone by wiping the entire surface with a damp cloth. You can also vacuum away any accumulated dust. Apply an oil-based high adhesion primer to home surfaces. Oil primers are efficient at preventing stains and holding on to ceramic and/or oil-based paint, but you won’t need to use them for decorative art tiles that won’t be walked on or used.

If you’re planning to paint in a high-traffic area, like the shower or the hallway floor, use two coats. Wait at least 24 hours for the primer to dry. Check the primer’s label for a precise drying time. If you’re working in an area with a lot of moisture, like the bathroom, you may want to wait 48 hours.

Lay the cement tiles. Once everything is ready, start by applying a layer of mortar to the floor. Mortar is basically the adhesive that helps the tile stick to the concrete, so choose the one that best suits your needs and your current situation. The commercially available mortars generally need to be mixed with a proportional amount of water. Be sure to read the manufacturers instructions on this.