What are the problems that need to be paid attention to in the process of tile paving?
Do not know what is the reason, many people like to mix the ceramic tile and cement, perhaps because the ceramic tile is more expensive, but the ordinary cement tiles mortar is worried about the sticky, so the ceramic tile is added to the cement mortar and stirred in the mortar. Many people think that ceramic tile glue is almost the same as cement, so mixing it together is no problem. Actually, the ceramic tile glue has its own formula, but when the ceramic tile designs glue and cement sand mix together, the performance of the ceramic tile glue is greatly reduced. If cement mortar has better water retention and better placement, it is recommended to add cement paste to the cement.
Ceramic tiles shop can not be perfect each batch, there will always be a variety of problems, it is suggested that in the process of paving, find problems in time to remind the business of quality or color difference and other problems, timely consultation and solution. It is suggested that the owner inform the constructor before construction: if there are any problems found in the construction, we should timely feedback, so that we can deal with them in time and avoid many problems. In the process of paving, it is found that the tiles have problems, such as the size specification, the ceramic tile price and so on, and the construction should be taken out as far as possible. It can cut small pieces and splice into mosaic use.
Because of the cause of heat expansion and contraction, the ceramic floor tile does not leave the seam, it affects the service life of the tile, and does not leave the seam. The tile will squeeze each other, causing the problems of the glaze crack, the arch, the empty drum, the falling off and so on. Therefore, whether the tiles are plaster or the “seamless tiles” currently mentioned in the market, both of them need to be sewn. The specific width of the stitch should be communicated with the owner before the tile is padded. In order to be more intuitive, the owner can see how good the stitch is when it is decorated.
In the course of laying, tiles are unavoidable to be machined, and when corner paving is applied, they should also be chamfered and collaged. In the collage of Yang Jiao, be careful when chamfering, and try not to damage the glaze. It is best to let merchants or owners get a large processing plant cut. If you are in a hurry, we recommend using some portable electric cutting machines.
This problem is often ignored. When tiles are put up, everyone is careful. Once the brick is put up, many people don’t notice. So, many people stir the cement, move back and forth on the brick, and some tools pull back and forth.In particular, some processes such as paints, coatings, carpentry and so on are laid behind the tiles.Therefore, the laying of good tiles should be covered with protective film, and it is required to lay a good paste for at least 24 hours or more before walking on it.
In order to improve the effect of ceramic tile and stone placement, it is generally preferred to use beautiful sewing technology. The gap is not yellow, moldy, and easier to clean.It should be noted that the stitch should be done as soon as the ceramic tiles are dry. To prevent the ceramic tiles in kitchen from being dry, the construction on the surface of the tiles will cause the loosening of the tiles, leaving the hidden danger of hollowing out.
