Posts

How Waxing the Floor?


Follow manufacturer’s instructions if you are using a finish instead of a wax. Floor wax is a natural product that works into the pores of the wood. If you are trying to create a similar result using a synthetic finish, which bonds over the wood, you will need to follow the specific instructions that came with your product.


Polyurethane, the most common modern finish, should be stirred, then applied as quickly as possible and in one back and forth layer across the room, overlapping the previous stroke so you keep a wet edge. You should wear an organic vapor respirator mask and keep a fan blowing out a window while you work.


Sweep and mop your floor until it’s as clean as you can make it. Use a dust mop to pick up as much dust and as many small particles as possible. Anything you don’t get off the floor is likely to get caught in the wax, where it will stay until someone strips off the wax.


Use a new sponge mop or flat wax applier mop. Never use a used mop, even if it doesn’t look dirty. Sponge mops that have also been used for cleaning the floor are likely to introduce dirt into the wax, ruining the look.


Line the mop bucket with a garbage bag and fill with floor wax. The trash bag prevents the wax from caking onto the mop bucket and ruining it for future uses. If you are using a flat wax applicator mop, you can skip this step. Those mops are designed to have the wax poured directly onto the mesh backing on the upper side.

Does Ceramic Tile Have Radiation?


Now each building has tiled tile, become indispensable adornment.But everything has two sides.With the requirement of ceramic tile expanding continuously, then the problem comes:does ceramic tile have radiation?Let’s know the problem:
Ceramic tile radiation refers to the phenomenon that ceramic tile contains radioactive material, the radioactivity of glaze brick is more apparent.Glazed ceramic tile is to apply a layer of glaze on ceramic tile base, ceramic tile surface color is varied, pattern and pattern is rich.Most of the ceramic tiles are from potassium minerals, such as feldspar and mica, which contain certain radioactive substances such as uranium and potassium. It is still radioactive after the process of physical chemistry, such as pulverization and sintering. And in order to clean the surface of the tile, the raw materials often include the high radioactive zirconium sand, which also makes some tiles highly radioactive.
The national building materials test center, however, ceramic and stone detection department senior engineering expressed: add a small amount of zirconium silicate porcelain production process is a kind of modern production technology, has a history of more than ten years in our country, it is comparatively mature technology.The radioactivity of brick is very little, wait for a year in normal household environment to absorb radiation quantity, much less than do an X-ray examination, so need not worry completely.And the radiation effect of ceramic tile on human body is less than the radiation that USES mobile phone to talk a minute to produce the influence big.